纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2000 × 800 × 750 mm
Tabletop thickness	30 mm
Integrated central tea tray zone dimensions	1200 x 300 mm
Perimeter knee clearance height	680 mm
Long-side seating clearance	600 mm
Short-side seating clearance	400 mm
Tabletop overhang past pedestal	100 mm
Chair seat height (matching set)	450 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Table total net weight	180 kg
Distributed static tabletop load capacity	300 kg
Recommended maximum seating capacity	6 users
Surface temperature resistance	1200 °C
Surface scratch resistance (Mohs hardness)	6
Pedestal static vertical load per support	200 kg
Surface stain penetration resistance	0.03%
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop slab	30mm polished black sintered stone with nano anti-stain coating
Support pedestals	Polished natural black-and-white veined marble block, solid construction
Internal support frame	50x50mm carbon steel square tube with matte black powder coating
Recessed tea tray insert	Matte black sintered stone panel, flush-fit to tabletop
Chair frames	20x20mm matte black powder-coated carbon steel square tubing
Chair upholstery	30mm high-density polyurethane foam with 1mm thick matte grey woven fabric
Chair lumbar pillows	20mm soft rebound polyester fiber fill, matching grey woven fabric
Surface finish coating	Nano crystal clear coat, 0.1mm thick, 5 application passes
Foot pads	8mm thick non-slip rubber pads at pedestal base contact points
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Integrated tea service zone	Recessed central tray area sized for teapot, 4 teacups and tea accessories
Dual pedestal support design	End-mounted block supports providing unobstructed perimeter leg room for 6 seats
Seating configuration	Supports 4 seats along long edges and 2 seats at short ends for 6-person tea service
Surface maintenance function	Non-porous polished top allows wet wiping and stain removal without sealant reapplication
Assembly requirement	Knock-down construction requiring attachment of pedestals to tabletop with included hardware
Floor protection function	Rubber foot pads prevent marble base scratches to hard flooring and reduce movement noise
Optional upgrade fitment	Pre-cut mounting points under tea zone compatible with embedded electric water boiler and drain bucket
Pedestal block dimensions	400 x 800 x 720 mm
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Commercial tea room application	Suitable for high-end tea house private rooms, supporting 6-person formal tea service
Home dining space application	Suitable for open-plan luxury dining rooms, used for daily dining and home tea gatherings
Office reception space application	Suitable for executive office reception areas, used for hosting guests and casual meetings
Villa living space application	Suitable for villa open living/entertainment zones, paired with modern minimalist soft furnishings
Recommended clearance around table	900 mm minimum clearance from table edge to walls/obstacles to allow chair movement and access

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture - Strength, durability and safety for domestic dining tables, applicable for load testing
EN 13722:2004	Furniture - Test methods for surface finishes, applicable to stone top abrasion resistance check
EN 71-3:2019	Migration of certain elements, applicable to coating material safety evaluation

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to structural frame evaluation
GB 18584-2001	Limit of harmful substances in furniture, applicable to formaldehyde emission check for non-stone components
GB/T 15102-2017	Specification for artificial stone decorative slabs, applicable to sintered stone tabletop quality check
GB/T 19766-2016	Specification for natural marble building slabs, applicable to pedestal material quality check

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to structural frame evaluation；
2. GB 18584-2001：Limit of harmful substances in furniture, applicable to formaldehyde emission check for non-stone components；
3. GB/T 15102-2017：Specification for artificial stone decorative slabs, applicable to sintered stone tabletop quality check；
4. GB/T 19766-2016：Specification for natural marble building slabs, applicable to pedestal material quality check；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · TDT-BLK-2000-6S-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · TDT-BLK-2000-6S-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · TDT-BLK-2000-6S-01打开导出工具

页面快速操作

发布采购询价

产品描述

This modern luxury 6-seater rectangular tea dining table balances refined visual appeal with purpose-built functionality for both tea service and everyday dining. Its design features a sleek polished black sintered stone tabletop supported by two solid, polished natural marble block pedestals positioned at opposite short ends, showcasing dramatic black-and-white veining that adds textural contrast to the monochromatic table surface. A flush-fit recessed central tea tray crafted from matte black sintered stone runs along the table’s length, creating a dedicated, seamless service zone without disrupting the table’s clean, streamlined profile. The matching seating pieces feature matte black powder-coated carbon steel frames upholstered in matte grey woven fabric, padded with high-density polyurethane foam and paired with soft, matching lumbar pillows for consistent, coordinated styling.
Built for long-term durability, the 30mm thick tabletop is finished with a nano anti-stain coating and nano crystal clear coat applied in five passes, delivering a non-porous surface that resists heat, scratches, and stain penetration. The internal support structure uses matte black powder-coated carbon steel square tubing to connect the solid marble pedestals to the tabletop, while 8mm non-slip rubber foot pads at each pedestal base prevent floor scratches and reduce movement noise. The dual end-mounted pedestal design creates unobstructed leg room around the entire table perimeter, supporting a seating layout of four positions along the long edges and two at the short ends to accommodate six users comfortably. The recessed central tray is sized to hold a teapot, four teacups, and standard tea accessories, with pre-cut mounting points under the zone for optional upgrades including an embedded electric water boiler and drain bucket. The non-porous tabletop cleans easily with wet wiping, with no need for regular sealant reapplication to maintain its finish.
This table fits seamlessly across high-end residential and commercial spaces, including luxury open-plan home dining rooms, villa living and entertainment zones, executive office reception areas, and private rooms in premium tea houses, supporting both daily meals, casual guest meetings, and formal 6-person tea service. For procurement, note that the set ships in two cartons with knock-down construction requiring on-site assembly using included hardware, with reference assembly time of 40 minutes per set. When planning space layout, allow the minimum required clearance from the table edge to walls or fixed obstacles to accommodate comfortable chair movement and access. The table is sold unbranded, and pairs best with modern minimalist soft furnishings to complement its luxe, contemporary aesthetic.

Modern Luxury 6-Seater Rectangular Sintered Stone Tea Dining Table with Dual Patterned Marble Block Pedestals and Integrated Central Tea Tray Specifications

供应商与现货