商品供应商Modern Rectangular Sintered Stone Tea Table with Integrated Electric Tea Brewing Station，20mm polished sintered stone, marble-look light grey veined finish
可联系供应商获取生产周期与报价。
PRODUCT MODULE 01 / 06
基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源：工厂资料结构化字段，最终以实测值为准
| 产品外部尺寸（宽 × 深 × 高） | 2200 × 800 × 750 mm | |
|---|---|---|
| Sintered stone tabletop thickness | 20 mm | |
| Tea appliance recess cutout size | 370 x 200 mm | |
| Pedestal width per support | 300 mm | |
| Central knee clearance height | 620 mm | |
| Central knee clearance width between pedestals | 1600 mm | |
| Left storage cabinet internal height | 500 mm | |
| Tabletop edge radius | 20 mm | |
| Pedestal base height from floor | 730 mm | |
| Tea tray channel length | 600 mm | |
| Floor clearance under tabletop overhang | 700 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源：产品性能数据，采购前请核对具体测试口径
| Tabletop uniform static load capacity | 260 kg | |
|---|---|---|
| Integrated electric kettle capacity | 1.2 L | |
| Integrated sterilizer/rinse pot capacity | 0.8 L | |
| Kettle boiling time to 100°C | 3 minutes | |
| Sintered stone surface heat resistance | 1200 °C | |
| Recommended number of seated users | 5 | |
| Internal water bucket storage capacity | 18.9 L | |
| Product net weight | 100 kg | |
| Structural warranty period | 3 years | |
| Reference Static Load | 150 kg depending on category |
PRODUCT MODULE 03 / 06
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源：以工厂材质清单与验货报告为准
| Tabletop panel | 20mm polished sintered stone, marble-look light grey veined finish | |
|---|---|---|
| Pedestal outer frame | 1.5mm thick brushed stainless steel with vertical fluted detailing | |
| Pedestal internal cabinet | 18mm E0-grade engineered wood panel with moisture-resistant laminate | |
| Cabinet door hinge hardware | Stainless steel soft-close concealed hinges | |
| Tabletop edge finish | Polished and rounded sintered stone, no sharp exposed edges | |
| Pedestal bottom foot pads | 5mm thick non-slip rubber pads | |
| Tea appliance recess trim | Matte black stainless steel edge trim | |
| Internal water supply tubing | Food-grade silicone tubing, BPA-free | |
| Drainage fitting | Stainless steel 304 drain outlet connected to waste water tank | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源：功能配置参数，以供应商正式规格为准
| Integrated auto-fill tea system | One-button automatic water feed, 3 temperature presets (85/95/100°C) for different tea types | |
|---|---|---|
| Hidden pedestal storage | Left enclosed cabinet houses clean water bucket, waste water tank, and power adapter | |
| Recessed drainage system | Built-in drain directs rinse water from sterilizer to internal waste tank without exposed pipes | |
| Multi-side seating access | Open central knee space allows seating along both long edges and short guest side | |
| Power cord management | Internal cable routing channels hide power cords from tea appliance to wall outlet | |
| Heat-resistant work surface | Sintered stone top supports direct placement of hot kettles and teapots without heat mats | |
| Stain-resistant surface finish | Non-porous sintered stone surface resists tea stains and allows easy wipe cleaning | |
| Leveling adjustment | Base foot pads adjust 10mm to compensate for uneven floor surfaces | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源：外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源：依据产品结构与品类整理的推荐应用场景
| Office reception area | Serves as guest tea reception station for meeting rooms and executive offices | |
|---|---|---|
| Living room casual tea space | Fits modern residential interiors for daily tea preparation and family use | |
| Private tea room | Functions as dedicated tea ceremony table for hobbyist and commercial tea spaces | |
| Balcony leisure area | Suitable for compact covered balcony spaces for relaxed small-group tea service | |
| Executive lounge space | Pairs with upholstered guest seating for informal business discussions over tea |
STANDARD S1
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 12521:2015 | Furniture strength, durability and safety for domestic tables, applicable to structural performance | |
|---|---|---|
| EN 60335-2-15:2002 | Safety for household heating appliances, applicable to integrated kettle/sterilizer | |
| EN 13722:2004 | Furniture surface resistance to dry/wet heat, applicable to tabletop finish testing |
STANDARD S3
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal cabinet panels | |
|---|---|---|
| GB/T 4897.3-2003 | Particleboard for furniture use, applicable to engineered wood structural components | |
| GB 4706.1-2005 | Safety of household electrical appliances, applicable to integrated tea heating appliance | |
| GB 6566-2010 | Limit of radionuclides in building materials, applicable to sintered stone tabletop |
招标文件标准化描述文本
本产品须满足以下技术参数要求： 1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to internal cabinet panels； 2. GB/T 4897.3-2003：Particleboard for furniture use, applicable to engineered wood structural components； 3. GB 4706.1-2005：Safety of household electrical appliances, applicable to integrated tea heating appliance； 4. GB 6566-2010：Limit of radionuclides in building materials, applicable to sintered stone tabletop； 最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告，可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块，文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具