The Square Wooden Side Table, model WST-SQ600offers a traditional four-sided wooden table form with a warm brown visual character suited to restrained commercial and residential interiors. Its 600 mm square flat top provides an orderly surface for cups, documents, phones, lamps, or decorative objects. The tabletop is presented in wood veneer or a wood-grain finish over engineered board, bordered by rounded wood-look edge banding or solid-wood lipping with a polished lacquer finish. A high wood-finished apron encircles the top, while fixed square-tapered legs with arched cutaways at the corner blocks reinforce the classic silhouette. Although the product facts describe five fixed wood-finish legs in the support configuration, the title and category information present the piece as a square wooden side table, so the final leg count should be checked in the supplier bill of materials before order confirmation. Construction combines a wood-finished structural rail, wooden supports, concealed wood knock-down or glued corner hardware, and internal metal connector brackets. The visible coating is a glossy clear lacquer or polyurethane wood finish, while the substrate and exact finish grade require supplier confirmation. The table is designed as a rigid floor-standing assembly for level hard flooring, with no leveling adjustment. Leg-to-apron attachment is required during installation, with a reference assembly time of 40 minutes per set; the set ships across two cartons. The open under-table area supports floor cleaning and provides limited seated leg room, and the design intentionally excludes drawers or doors. Rated for two users, the table is appropriate beside guest seating in office reception areas, executive lounges, and meeting break zones. It also works between two armchairs or beside a sofa in hospitality settings, lounges, and living spaces where a fixed, non-storage side table is preferred. Procurement teams should confirm material composition, finish grade, edge treatment, hardware type, and leg configuration directly with the supplier documentation. The published service figures include an 18 kg net weight, a 50 kg distributed tabletop load, a 20 kg concentrated edge load, and a 35 kg single-leg downward service load; the surface is rated for an 80 degrees C service temperature. Packaging reference data lists 0.8 cubic meters per set and a 120 kg packaged gross weight, which should be planned into receiving, handling, and site-delivery arrangements.