This large conference table, model CONF-REDW-8000P, presents a formal, refined visual profile anchored by its signature rounded-end design and warm reddish-brown wood finish. Its elongated 8000 mm form features smoothly curved end panels with a 600 mm radius, eliminating sharp corners for a polished, approachable boardroom aesthetic. The tabletop displays book-matched reddish walnut veneer grain laid over its 80 mm thick surface, framed by matching solid hardwood edge banding that aligns seamlessly with the four sets of 180 x 180 mm solid wood support legs, creating a cohesive, upscale appearance suited to professional settings. A 120 mm tall apron sits below the tabletop, leaving 680 mm of clear knee clearance for seated users across its full 2000 mm width. Constructed for lasting commercial use, the table is built on a high-density E0 grade multi-layer engineered wood substrate with a density of 760 kg/m³ and 12% moisture content, rated for 51.2 MPa static bending strength to support consistent daily use. The 0.8 mm thick walnut veneer is finished with water-based polyurethane lacquer applied across five base coats and three top coats, delivering Grade 1 coating adhesion and short-term heat resistance up to 100 ℃. The solid wood support legs include reinforced internal steel brackets for structural stability, while the table’s modular assembled structure uses precision-aligned sections joined with steel connector brackets. Formaldehyde emission measures 0.025 mg/m³, supporting healthy indoor air quality in enclosed meeting spaces. Functionality is tailored to modern collaborative work, with recessed integrated ports spaced 520 mm apart along the table center, supporting AC power, USB charging, RJ45 data, HDMI, and conference microphone connections. A continuous concealed central cable channel made of powder-coated cold-rolled steel with removable access panels runs the full length of the table, routing cables neatly to floor outlets to eliminate surface clutter. The fully rounded edges and end corners deliver built-in anti-collision protection, reducing risk of impact injury during active use. The table supports a 500 kg distributed static load across its surface, accommodating meeting materials, presentation equipment, and personal items for large groups. This table is ideally suited for formal executive boardrooms hosting 28-person face-to-face leadership meetings, as well as government offices, party school facilities, and large corporate training conference rooms. When planning procurement, note the product ships as one set across two cartons, with a total packaged gross weight of 90 kg per set and 0.55 m³ total packaging volume. On-site assembly requires 40 minutes per set, with alignment hardware included to join the four modular sections securely. The unbranded design fits seamlessly with a range of existing formal boardroom furniture styles, offering a cohesive wooden construction aesthetic without restrictive branded design constraints.