The Red Veneer Multi-Seat Conference Desk, model CFD-VNR-2400, is an unbranded conference table built for structured formal seating arrangements. Its linear, fixed-panel design features a rich red wood veneer exterior with a black matte faux leather inlaid writing surface, framed by solid hardwood trim stained to match the veneer for a cohesive, traditional aesthetic. The integral veneered modesty panel, accented with diamond routing detail, forms part of the structural base, creating clean, unbroken lines that complement formal interior schemes while maintaining open, unobstructed leg room across the full front length of the desk. The desk is constructed with an 18mm MDF core topped with 0.6mm red wood veneer, finished with a stain-resistant seal for simplified surface care. Its 45mm thick tabletop is supported by an engineered wood plinth base with matching veneer finish, assembled with cam-lock and dowel hardware for stable joinery. Each support section features an 80mm main profile with a 2mm metal wall, built to hold a 150kg uniformly distributed static load across the surface, with 2000-cycle abrasion resistance and 45N edge impact resistance to withstand regular commercial use. The black faux leather writing inlay provides a smooth, glare-free writing area, while a pre-drilled 80mm diameter rear cable port connects to a 120mm deep integrated cable tray to keep presentation and power cords organized and out of sight. Each seated position is allocated 800mm of width, with 680mm of vertical knee clearance and 900mm of horizontal clearance per main seat, sized to comfortably accommodate three total users. This desk is well suited for executive boardrooms, government conference spaces, and hearing or committee rooms, where its long linear profile supports clear sightlines between all seated attendees. When planning procurement, note that the product ships in two cartons per set, with a total packaged weight of 90kg and packaged volume of 0.55 cubic meters. On-site assembly requires an 40 minutes per unit, and buyers should account for the desk’s 85kg net weight when arranging placement and installation to ensure proper floor support in the selected space. No additional tools or specialized mounting hardware are required beyond standard assembly implements for the included cam-lock and dowel joinery system.