| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
暂无参数纠错记录,发现错误可点击行末旗标提交 | ||||
Mahogany Finish Executive Office Side Credenza with Open Shelves and Drawer,型号 OFC-CRD-1830MH,归属“Traditional Office Sideboard”栏目,整体尺寸 1830 × 610 × 770 mm,主材为MDF。承重参数:50 kg。认证标签:Traditional,executive,style,closed,door,storage,open,shelf,drawer。本页汇总该型号 6 类产品参数及 GB / EN / ANSI/BIFMA 标准参考,支持公制与英制单位切换,目前已登记 1 家供应商,可直接发起询价。
| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
暂无参数纠错记录,发现错误可点击行末旗标提交 | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源:工厂资料结构化字段,最终以实测值为准
| Overall dimensions | 1830 x 610 x 770 mm | |
|---|---|---|
| Top panel thickness | 29 mm | |
| Side panel thickness | 18 mm | |
| Back panel thickness | 9 mm | |
| Left cabinet door dimensions | 520 x 600 mm | |
| Right cabinet door dimensions | 520 x 600 mm | |
| Center open compartment width | 580 mm | |
| Upper open shelf internal height | 200 mm | |
| Lower open shelf internal height | 210 mm | |
| Center drawer dimensions | 480 x 120 x 450 mm | |
| Raised top lip height | 30 mm | |
| Plinth base height | 60 mm | |
| Reeded side panel trim width | 60 mm | |
| Adjustable shelf pin spacing | 32 mm | |
| Door clearance swing radius | 500 mm | |
| Carcass Panel Thickness | 25 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源:产品性能数据,采购前请核对具体测试口径
| Top surface static load capacity | 50 kg | |
|---|---|---|
| Drawer slide cycle rating | 50000 cycles | |
| Door hinge cycle rating | 80000 cycles | |
| Net weight reference | 75 kg | |
| Anti-tip securement rating | 22 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源:以工厂材质清单与验货报告为准
| Carcass construction | 18mm E1 grade engineered wood core | |
|---|---|---|
| Exterior finish | Mahogany wood veneer with satin lacquer topcoat | |
| Hardware pulls | Chrome-plated zinc alloy bar handles | |
| Drawer slides | Cold-rolled steel ball-bearing full-extension slides | |
| Door hinges | Cold-rolled steel concealed 110-degree opening hinges | |
| Edge banding | 0.8mm thick matching mahogany PVC edge banding |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源:功能配置参数,以供应商正式规格为准
| Storage configuration | Two closed side cabinets, two-tier central open shelf, single center lower drawer | |
|---|---|---|
| Door operation | Hinged side doors open 110 degrees for full interior access | |
| Drawer operation | Full-extension drawer slides allow complete access to drawer contents | |
| Leveling adjustment | Four adjustable floor glides compensate for uneven office flooring |
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源:外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
推荐空间 / 目标用户 / 使用方式
数据来源:依据产品结构与品类整理的推荐应用场景
| Primary placement | Positioned against office walls adjacent to executive desks | |
|---|---|---|
| Storage use case | Stores office documents, supplies, and small equipment with mixed open/closed access |
欧洲市场准入与化学品要求
| EN 14073-2:2004 | Office storage furniture safety requirements, applicable for structural safety checks | |
|---|---|---|
| EN 14073-3:2004 | Office storage furniture stability and strength requirements, applicable for load testing |
美国及加拿大家具标准
| ANSI/BIFMA X5.9-2019 | Office storage units performance standard, applicable for commercial durability verification |
|---|
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for quality acceptance | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, applicable for E1 grade compliance | |
| GB/T 4897.3-2003 | Particleboard for furniture use, applicable for core material performance |
本产品须满足以下技术参数要求: 1. GB/T 3324-2017:General technical requirements for wooden furniture, applicable for quality acceptance; 2. GB 18580-2017:Formaldehyde emission limits for wood-based panels, applicable for E1 grade compliance; 3. GB/T 4897.3-2003:Particleboard for furniture use, applicable for core material performance; 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告,可选择公制或英制单位。
导出全部商品信息与参数模块,文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具