纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	630 × 780 × 1180 mm
Seat height from floor	450 mm
Seat cushion thickness	70 mm
Seat usable depth	500 mm
Seat usable width between armrests	500 mm
Armrest height from seat	220 mm
Backrest height above seat	730 mm
Backrest width at widest point	540 mm
Front leg cross-section dimension	50 x 50 mm
Rear leg cross-section dimension	45 x 45 mm
Seat to underside clearance at front	380 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended static user weight capacity	150 kg
Chair net weight	25 kg
Seat foam density	45 kg/m³
Back foam density	38 kg/m³
Foam rebound rate	60%
Upholstery abrasion resistance	50000 double rubs
Frame static load rating	500 kg
Seam stitch pitch	8 stitches per 30mm
Structural warranty period	5 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Structural frame, legs and armrests	Solid rubber wood with polished red-brown lacquer finish
Seat and backrest upholstery	1.2mm thick black abrasion-resistant PU faux leather
Seat cushion core padding	Cold-cured high-density polyurethane foam
Backrest core padding	Medium-firm molded polyurethane foam with lumbar indent
Backrest inner support panel	12mm thick multi-layer plywood under upholstery
Seat pan inner support	15mm thick solid wood framing under foam
Frame surface finish	Smooth, scratch-resistant nitrocellulose lacquer, polished to semi-gloss sheen
Upholstery attachment	Industrial heavy-duty polyester thread stitching, visible seam lines
Foot pads	Non-slip 5mm thick rubber pads at each leg base
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating adjustment	No height, swivel, tilt or recline mechanisms, fixed rigid posture position
Armrest support	Integrated curved solid wood armrests fixed to frame, no height or pivot adjustment
Lumbar support	Contoured built-in lumbar indent in backrest padding for upright seated support
Seating ergonomics	Upright 100-degree seat-to-back angle optimized for long meeting use
Floor protection	Fixed rubber foot pads prevent floor scratching and sliding during use
Surface maintenance	Smooth faux leather and polished wood surfaces wipe clean with standard office cleaners
Customization option	Frame wood finish and upholstery material/color can be modified for bulk orders
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive boardrooms	Formal high-back design suited for executive meeting spaces with traditional decor
Office guest and reception areas	Fixed stable structure provides professional seating for visiting guests
Conference and meeting rooms	Upright posture support suitable for multi-hour meeting use
Government and institutional offices	Formal durable construction meets public sector procurement standards
Hotel business centers	Classic styling coordinates with traditional hotel public area furnishings
Private executive offices	Suitable as stationary guest seating positioned across from executive desks
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-2:2018	Safety requirements for office seating, applicable to non-adjustable conference chair structural testing
EN 1022:2019	Test method for stability of residential and non-residential seating
EN 12520:2015	Strength, durability and safety requirements for domestic and contract seating

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to solid wood frame structural testing
GB/T 16799-2008	Specification for polyurethane synthetic leather used for furniture upholstery
GB 18584-2001	Limit of harmful substances in wooden furniture for indoor decorating materials
GB/T 10357.3-2013	Test method for strength and durability of chair and stool seats and backs

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to solid wood frame structural testing；
2. GB/T 16799-2008：Specification for polyurethane synthetic leather used for furniture upholstery；
3. GB 18584-2001：Limit of harmful substances in wooden furniture for indoor decorating materials；
4. GB/T 10357.3-2013：Test method for strength and durability of chair and stool seats and backs；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CONF-WD01-HB

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CONF-WD01-HB

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CONF-WD01-HB打开导出工具

页面快速操作

发布采购询价

产品描述

The Fixed Four-Leg Solid Wood Frame High-Back Black Faux Leather Executive Conference Armchair (model CONF-WD01-HB) is an unbranded formal seating solution built for traditional professional environments. Its design features a tall, structured high-back silhouette with integrated curved armrests that flow seamlessly from the solid wood frame, finished in a polished red-brown semi-gloss that creates a warm, authoritative contrast against the smooth black faux leather upholstery. Crisp, visible heavy-duty polyester stitching defines the seat and backrest edges, while non-slip rubber foot pads sit discreetly at each leg base to complete the refined, fixed-profile form. The chair’s construction centers on a solid rubber wood frame, legs, and armrest structure coated in scratch-resistant nitrocellulose lacquer for long-term surface durability. Beneath the 1.2mm thick abrasion-resistant black PU upholstery, the seat pan is supported by solid wood framing, holding a cold-cured high-density polyurethane foam cushion. The backrest uses a multi-layer plywood inner support, shaped with a contoured lumbar indent and filled with medium-firm molded polyurethane foam, positioned at a 100-degree upright seat-to-back angle optimized for extended seated use. There are no height, swivel, tilt, or recline mechanisms, creating a rigid, stable fixed seating position. Practical design elements support consistent professional use: the integrated solid wood armrests offer steady upper body support without adjustment, built-in lumbar contouring encourages upright posture through multi-hour meetings, and both the faux leather and polished wood surfaces wipe clean easily with standard office cleaning products. Non-slip rubber foot pads prevent floor scratching and unwanted chair movement during use. For bulk orders, customers may request modified frame wood finishes, as well as alternative upholstery materials and colors to match existing space decor. This armchair is suited for a range of formal commercial and select residential settings, including executive boardrooms with traditional design schemes, office guest and reception areas, standard conference and meeting rooms, government and institutional offices, hotel business centers, and private executive offices as stationary guest seating positioned across from work desks. Procurement teams should note the chair ships in two cartons per set, with a per-set assembly time of 40 minutes, and account for packaging dimensions and weight when planning delivery and on-site storage. Bulk purchasers can also leverage 20GP container loading metrics to coordinate large-scale order fulfillment efficiently.

Fixed Four-Leg Solid Wood Frame High-Back Black Faux Leather Executive Conference Armchair Specifications

供应商与现货