The CF-WD08-HB-BLK is a high-back black executive visitor conference armchair built for formal professional settings, featuring a streamlined, classic silhouette anchored by a walnut-stained matte rubberwood frame. Its integrated curved solid wood armrests flow seamlessly from the front legs to the backrest structure, creating a cohesive, polished visual profile. The black matte faux leather upholstery is accented with matching black bonded nylon stitching, with reinforced edge stitching at high-tension seat seams, while the horizontally segmented channeled backrest adds subtle structured texture without distracting from formal decor. Constructed with a rigid fixed 4-leg frame, the chair uses mortise joints and reinforced hardware to connect components, with a cross-brace wood support under the seat linking front and rear legs for added rigidity. The frame is finished with smooth UV-cured eco-friendly wood lacquer that resists scratches and stains, while hard-wearing nylon anti-slip glides fitted to each 50mm square leg base prevent slipping and protect hard floor surfaces. The 70mm thick seat cushion uses 30kg/m³ high-resilience polyurethane foam wrapped in soft polyester batting, set on a 14mm bent plywood internal support board. The segmented backrest features a built-in lumbar support zone, and the thick rounded front seat edge reduces pressure on the backs of legs during extended seating. The fixed armrests sit 220mm above the seat at standard desk elbow height to support forearms, and the non-porous upholstery and lacquered wood surfaces wipe clean easily with standard office cleaning products. The chair holds a static weight capacity of 150kg, with 3000-rub abrasion-resistant upholstery and a 5-year design service life. This chair fits a range of formal spaces, including corporate conference rooms for board meetings and contract discussions, executive reception areas outside leadership offices, government and institutional meeting rooms, full-day training and seminar spaces, and private offices for one-on-one client or staff meetings opposite 2.4m executive desks. When procuring this unbranded model, note each unit ships in two cartons, requires 40 minutes of assembly per set, and 135 sets fit a 20GP container at 85% space utilization. The fixed frame offers no swivel, tilt, or height adjustment, so confirm placement aligns with intended fixed seating layouts. The chair has an overall dimension of 680 x 780 x 1100 mm, with a 480mm seat height, 530mm usable seat width, 480mm usable seat depth, and 550mm backrest height above the seat to ensure compatibility with existing table heights and room layouts.