The LINGKEN CW-HB-1180 is a formal high-back fixed conference guest chair designed for professional seating environments, presenting a polished, structured silhouette tailored to formal settings. Its upright, tailored profile features a tall 700mm backrest accented with segmented horizontal channel tufting, paired with smoothly curved integral bent solid wood armrests that sit 220mm above the seat. The fixed four-point base sits flush with floor surfaces via non-marking plastic glides, creating a stable, streamlined layout that aligns neatly with standard 760mm height conference tables without protruding edges or movable components that disrupt orderly room arrangements. Built for long-term regular use, the chair’s load-bearing frame is constructed from solid rubber hardwood, reinforced with dual solid wood stretcher cross-bracing and a central solid hardwood support post for consistent structural stability. All wood surfaces are finished with wear-resistant polyurethane lacquer, secured with zinc-plated steel hardware. The seat is padded with cold-pressed high-density foam at a 70mm thickness, while the backrest uses layered high-resilience foam, both upholstered in smooth black wear-resistant PU eco-leather. The non-porous leather surface supports quick, simple routine cleaning, with upholstery tested to 50000 abrasion cycles, tightly tailored seams set at 8 stitches per 30mm, and wood finish adhesion rated to Grade 1. The fixed configuration supports a formal upright seating posture, with a recommended static load capacity of 150kg, and non-marking glides that are compatible with wood, tile, and low-pile carpet flooring. This chair is suited to a range of formal commercial and public sector spaces, including boardrooms, standard meeting rooms, visitor waiting zones outside private executive offices, formal training rooms, and government or institutional office meeting areas, where consistent, professional seating is required. For procurement planning, each unit ships in two cartons, with a packaged gross weight of 23kg per set, requiring 40 minutes of assembly time per unit. A 20GP shipping container can accommodate 135 sets at 85% space utilization, supporting efficient bulk ordering for large space fit-outs. Procurement teams should note the fixed, non-adjustable design is purpose-built for formal, stationary seating needs rather than flexible, multi-use workspaces that require mobile or reclining seating options.