The Fully Upholstered Cylindrical Ottoman Stool (model CYL-OTT-450) is an unbranded, space-efficient public furniture piece defined by its clean, consistent cylindrical silhouette with no arms or backrest. It features a softly rounded top edge and a weltless, matching fabric finish that creates a seamless, unbroken visual profile. Side wall upholstery wraps fully from the smooth circular seat surface down to the base, delivering a tailored, streamlined appearance that complements a wide range of interior design schemes without protruding edges or decorative clutter. Its balanced, symmetrical form ensures it reads as a cohesive, unobtrusive accent regardless of placement angle. Built for regular use, the stool uses a 12mm thick plywood internal support frame wrapped in 100% polyester woven fabric, with high-density 28 kg/m³ polyurethane foam padding across the seat and sides. The 80mm thick seat pad offers a 45% rebound rate for consistent comfort, while seams are stitched at 8 stitches per 25mm for durable, neat construction. Fabric upholstery meets 30000 Martindale abrasion resistance standards for long-term wear. Four hard plastic non-marking glides lift the base 5mm off floor surfaces, assembled with low-VOC water-based adhesive to reduce indoor air quality impacts, with a 20mm rounded top edge to prevent sharp contact points. The stool delivers flexible dual functionality, serving equally well as temporary extra guest seating or an elevating footrest. It ships fully assembled for immediate use, with a 7 kg net weight that allows single-person repositioning between spaces as needs shift. The non-marking glides prevent scuffs and surface damage on hard flooring, and the piece supports a 136 kg static load capacity. A 12-month limited warranty covers manufacturing defects. This ottoman stool is suited for placement adjacent to sofas and armchairs in shared living spaces for footrest or overflow seating use, as well as low-profile seating at bedroom dressing tables for vanity use. Its compact 450mm x 450mm x 450mm dimensions make it easy to tuck into tight spaces without disrupting traffic flow. For procurement, note the unit ships as 1 set across 2 cartons, with a packaged gross weight of 23 kg per set and total carton volume of 0.26 m³ per set, supporting 135 set loads in a 20GP container at 85% space utilization. The reference assembly time listed reflects receiving processing rather than end-user construction, as no end-user assembly is required.