This unbranded teal button-tufted upholstered lounge armchair, model LAC-TB01-TL-WL, delivers a refined modern seating solution balanced for both residential and light commercial settings. Visually, it features a structured tufted back, soft wrap-around armrests, and tapered splayed solid rubberwood legs in a natural finish, accented by dark contrast piping along all upholstery seams to define its clean, tailored silhouette. The fixed four-leg base creates an open, airy profile that complements a wide range of interior design schemes without overwhelming surrounding decor. Constructed for consistent daily use, the chair is built on an 18mm thick plywood internal seat shell reinforced with solid wood support cleats. Its outer upholstery uses durable teal woven polyester fabric, tested to 30000 Martindale abrasion cycles for long-term resistance to surface wear. The seat holds a loose, reversible cushion filled with high-density 28 kg/m³ polyurethane foam at 160mm thickness, with a 45% rebound rate to maintain supportive shape over time, while the tufted backrest is filled with medium-density polyurethane foam anchored by button tufting to prevent fill shifting. The splayed rubberwood legs attach via tooled screw-in connections to pre-installed frame mounts, with pre-applied anti-slip foot pads to eliminate scratches on hard flooring surfaces. Functionally, the chair is configured with a fixed 105-degree seated back angle calibrated for relaxed lounge posture, supporting a static weight capacity of 150kg across its four legs, each rated for 50kg of static load. Exact dimensions measure 813 x 838 x 940 mm overall, with a 640mm wide, 572mm deep seat positioned at 470mm floor height, 610mm tall backrest, and armrests set at 690mm from the floor, supported by 400mm tall legs for an open, elevated seating position. This chair is ideally suited for residential spaces including living rooms, private reading nooks, and bedrooms as dedicated individual relaxed seating, as well as commercial accent applications in hotel lobbies, office breakout areas, and casual cafe seating zones. For procurement planning, note each unit ships across two cartons with a total packaged gross weight of 23kg, requires 40 minutes of on-site assembly, and is covered by a 12-month recommended warranty period. A 20GP shipping container can hold 135 sets at 85% space utilization for bulk order scheduling.