纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1380 × 3200 × 750 mm
Tabletop thickness	25 mm
Leg spread (front-to-back)	1100 mm
Knee clearance height (under top)	690 mm
Knee clearance width (between front legs)	2800 mm
Edge profile	2 mm radius chamfered edge
Wood accent joint width	180 mm
Floor contact pad diameter	30 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Distributed tabletop static load	260 kg
Single-point concentrated load	50 kg
Seating capacity	10 persons
Tabletop surface abrasion resistance	2000 cycles
Surface heat resistance	80 °C
Leg frame static stability load	450 kg
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop substrate	High-density particleboard core
Tabletop surface finish	Matte white thermally fused melamine laminate
Leg frame material	1.5 mm thick cold-rolled steel tube
Leg finish	White matte powder coating
Leg joint accents	Solid oak veneer wrapped MDF
Edge banding	2 mm thick PVC edge
Floor protection pads	TPE non-marring glides
Internal support frame	1.2 mm thick steel cross bracing
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Structure type	Fixed freestanding assembly
Assembly requirement	Knock-down construction
Surface function	Flat continuous work surface
Stability feature	Triangular wishbone leg bracing
Cable management compatibility	Pre-drilled grommet-ready surface
Floor protection	Height-adjustable glide pads
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Corporate boardrooms	Formal meeting spaces for 10person executive meetings and presentations
Training rooms	Configurable space for internal training, workshops, and group activities
Open office collaboration zones	Dedicated long table for cross-team collaborative work sessions
Professional service offices	Client meeting spaces for law, consulting, and design firms
Higher education meeting spaces	Faculty and administrative meeting rooms in campus buildings

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Office worktables, safety and dimensional requirements for office table products
EN 15372:2016	Office furniture, strength, durability and stability requirements for tables
EN 13722:2004	Furniture, test methods for surface resistance to abrasion and wear

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Desk products standard, applicable for commercial office table performance testing

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden office furniture, applicable to tabletop panel construction
GB/T 3327-2018	Office furniture desks and tables, specifies dimensional and stability requirements
GB 18580-2017	Formaldehyde emission limits for wood-based panels, required for indoor commercial use

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden office furniture, applicable to tabletop panel construction；
2. GB/T 3327-2018：Office furniture desks and tables, specifies dimensional and stability requirements；
3. GB 18580-2017：Formaldehyde emission limits for wood-based panels, required for indoor commercial use；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CONF-WHT-WB3200

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CONF-WHT-WB3200

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CONF-WHT-WB3200打开导出工具

页面快速操作

发布采购询价

产品描述

This modern rectangular white conference table features a clean minimalist profile defined by a smooth, continuous matte white tabletop and splayed wishbone-style legs accented with warm wood details, creating a polished, uncluttered visual presence that balances professional form with subtle textural contrast. Its open, balanced layout leaves clear, unobstructed space beneath the work surface, delivering ample room for occupants to sit comfortably without restrictive leg interference across the full length of the table. The table is constructed for durable commercial office use, starting with a high-density particleboard tabletop core finished with matte white thermally fused melamine laminate, edged with 2mm radius chamfered PVC banding to soften contact points. Its leg frames are formed from cold-rolled steel tube finished in a matching matte white powder coating, with triangular wishbone bracing for structural rigidity, and solid oak veneer wrapped MDF accents at leg joints to add warm visual detail. Internal steel cross bracing reinforces the tabletop assembly, while TPE non-marring, height-adjustable glide pads at each leg base protect flooring and allow for minor leveling on uneven surfaces. Functionally, the fixed freestanding table supports up to 10 people, with a flat continuous work surface suited for document placement, device use, and collaborative materials. The tabletop is pre-drilled and grommet-ready, supporting organized routing of power and data cables for meeting room technology, with capacity to hold standard cable management trays for up to 10 cables. Its abrasion-resistant surface withstands regular daily use, with heat resistance suitable for common office items like warm beverage containers and placed presentation equipment, and load ratings suited for standard meeting room supplies and electronic devices. It ships in knock-down form across two cartons, with straightforward assembly suitable for standard facility installation teams. This table fits naturally in a range of commercial and professional spaces, including corporate boardrooms for executive meetings and presentations, training rooms for workshops and group activities, open office collaboration zones for cross-team work sessions, client meeting spaces for law, consulting, and design firms, and faculty or administrative meeting rooms in higher education campus buildings. When procuring, buyers should account for required assembly time, confirm access pathways match delivered package dimensions, plan for compatible cable management grommets and trays to suit room technology needs, and verify that the selected placement area can accommodate the table’s full footprint and seating clearance for 10 occupants.

Modern Rectangular White Conference Table with Splayed Wishbone Legs and Wood Accents Specifications

供应商与现货