The ENG-CT-6000-WAL-GRY is an unbranded large rectangular conference table designed for formal boardrooms and corporate meeting environments. Its long, dark walnut wood-grain tabletop creates a substantial executive appearance, while the grey enclosed panel base provides visual weight and a structured, modern silhouette. Six metal-rimmed circular cable ports are arranged along the centerline, feeding a continuous recessed channel that conceals power, HDMI, and network cables. Grey fluted support piers and vented panel doors on both sides add texture and symmetry, and a narrow contrasting trim on the table edge separates the dark top from the lighter base. The overall dimensions are 6000 x 1600 x 760 mm, with seating capacity for 20 persons. Each main seat is planned with 680 mm high and 900 mm wide knee clearance, supporting comfortable use with laptops, documents, and conference devices. The tabletop combines a 25 mm high-density particleboard core with dark walnut wood-grain high-pressure laminate facing. The finished top is 45 mm thick and finished with a 50 mm laminated profile edge. The base uses grey melamine-faced wood-based panels with sealed exposed edges, grey laminated structural piers, and integrated panel supports. The 80 mm main support section has a 2 mm metal wall, and the base meets the floor through six contact zones with leveling pads. The central cable system includes six 80 mm diameter access ports, a 4200 mm recessed channel, and a cable tray 120 mm deep. The channel cover is supplied in brushed grey metal or metal-look laminate. Slotted panels provide five vertical ventilation slots per grille section, helping equipment or cable bays along both sides remain ventilated. The table is freestanding and does not require wall fixing. Its distributed tabletop load rating is 300 kg, with a 50 kg point load at a writing position, 280 kg net weight, and a stability target of 2 mm maximum deflection under full distributed load. The surface is rated for a 45 kg impact dropped from 100 mm. This table is suited to executive boardrooms, headquarters meeting rooms, training centers, and government conference areas where integrated cable routing and multi-device seating are priorities. Procurement planning should account for delivery as one set in two cartons, packaged dimensions of 2100 x 1100 x 300 mm, packaged gross weight of 90 kg per set, and packaging volume of 0.55 cubic meters. Assembly time is referenced at 40 minutes per set, and access through building routes should be checked against the carton dimensions before installation.