| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Table overall dimensions | 700 x 700 x 750 mm | |
|---|---|---|
| Table base diameter | 450 mm | |
| Table pedestal column diameter | 60 mm | |
| Chair overall dimensions | 620 x 580 x 820 mm | |
| Chair seat height | 450 mm | |
| Chair seat width | 480 mm | |
| Chair seat depth | 420 mm | |
| Chair arm height above floor | 660 mm | |
| Chair base diameter | 380 mm | |
| Chair pedestal column diameter | 50 mm | |
| Seat cushion thickness | 50 mm | |
| Table edge thickness | 30 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Table static load capacity | 50 kg | |
|---|---|---|
| Set total net weight | 42 kg | |
| Recommended user count | 3 people | |
| Cushion foam density | 35 kg/m³ | |
| Cushion foam rebound rate | 40% | |
| Seat swivel rotation range | 360 degrees | |
| Surface abrasion resistance (seat fabric) | 20000 Martindale cycles | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Tabletop | 25mm thick MDF core with high-gloss white lacquer finish, rounded polished edge | |
|---|---|---|
| Table support structure | 1.2mm thick powder-coated matte white steel central pedestal and round base plate, weighted underside for stability | |
| Chair outer shell | 5mm thick injection-molded white ABS plastic with integrated armrests and curved back support, smooth matte finish | |
| Chair support structure | 1.0mm thick powder-coated matte white steel central stem and round base plate, integrated swivel bearing between stem and seat shell | |
| Seat cushion core | Medium-firm polyurethane foam, wrapped in polyester batting for soft edge feel | |
| Seat cushion upholstery | 220g/m² woven polyester fabric in bright red, stitched with 8mm seam pitch, non-removable cover | |
| Floor contact pads | 3mm thick non-slip black felt pads affixed to underside of each base plate, prevents floor scratching | |
| Swivel mechanism | Steel ball-bearing swivel joint between chair stem and seat shell, lubricated for smooth rotation | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Chair swivel function | 360-degree full rotation via sealed ball bearing mechanism, no tilt or height adjustment, returns to free rotation after use | |
|---|---|---|
| Integrated armrest support | Curved armrests formed as continuous part of the molded plastic shell, provide forearm support at 210mm above seat surface | |
| Table surface function | Smooth non-porous lacquered surface supports drinkware, reading materials and small table items, easy to wipe clean with damp cloth | |
| Freestanding pedestal design | All pieces use single central pedestal base with no protruding legs, maximizes leg room around table and under seats, reduces tripping hazards | |
| Fixed seat cushion placement | Cushions rest in molded recess of chair shell, no Velcro or fasteners visible, removable for spot cleaning | |
| Floor protection | Felt glides on all base bottoms allow smooth repositioning on hard flooring without scratching tile or wood surfaces | |
| Modular arrangement | Chairs can be positioned at any point around the round table to suit room layout, no fixed alignment required | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Number of packages | 4 cartons | |
|---|---|---|
| Table carton dimensions | 760 x 760 x 120 mm | |
| Single chair carton dimensions | 670 x 630 x 520 mm | |
| Total shipment gross weight | 50 kg | |
| Total shipment volume | 0.28 CBM | |
| Assembly time | 30 minutes | |
| 20ft GP container loading quantity | 102 sets | |
| 40ft HQ container loading quantity | 252 sets | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
推荐空间 / 目标用户 / 使用方式
| Residential balcony lounge | Compact 700mm round footprint fits small enclosed balcony spaces, provides casual seating for coffee or light meals with city views | |
|---|---|---|
| Small apartment dining nook | Leg-free pedestal design maximizes leg room in tight dining areas without bulky protruding table and chair legs | |
| Office break room seating | Wipe-clean white surfaces and durable fabric cushions support casual employee use for coffee breaks and informal meetings | |
| Reception waiting area | Modern minimalist sculptural design creates a sleek contemporary look for entryways and small waiting zones, with 3 seats for short-term visitor use | |
| Studio apartment flexible seating | Lightweight construction allows easy repositioning for guest seating, work breaks or casual dining as needed | |
| Café small two-top seating | 3-person configuration works for small cafes offering light beverages and snacks, with stain-resistant surfaces for quick turn-around between customers | |
| Light commercial café seating | Stain-resistant hard surfaces and durable fabric cushions suit small cafes serving light beverages and snacks, supporting quick turn-around between customers | |
| Recommended Matching Desk Size | 2.4 m executive desk |
欧洲市场准入与化学品要求
| EN 12520:2015 Furniture - Strength, durability and safety - Requirements for domestic seating | Applicable to dining chairs, requires static seat load of 1100N, back load of 450N, no structural failure after 100000 cycle fatigue test | |
|---|---|---|
| EN 15372:2016 Furniture - Strength, durability and safety - Requirements for domestic tables | Applicable to dining table, requires horizontal and vertical static load testing, stability on level floors, no tip over with 100N edge load | |
| EN 1022:2018 Domestic furniture - Seating - Determination of stability | Applicable to swivel chairs, requires no tip over when user leans 150mm forward or sideward from seat center |
美国及加拿大办公家具标准
适用于中国市场项目的标准
| GB/T 3324-2017 General technical requirements for wooden furniture | Applicable to MDF-core lacquered tabletop, requires edge finishing, formaldehyde emission ≤0.124mg/m3 (E1 grade), surface adhesion and impact resistance compliance for domestic dining furniture | |
|---|---|---|
| GB/T 24821-2009 General technical requirements for plastic furniture | Applicable to injection-molded ABS chair shells, requires load resistance, UV stability for indoor use, no sharp edges on all user contact surfaces | |
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applicable to all composite wood components, requires formaldehyde emission levels meeting E1 limits for indoor residential use |
本产品须满足以下技术参数要求： 1. GB/T 3324-2017 General technical requirements for wooden furniture：Applicable to MDF-core lacquered tabletop, requires edge finishing, formaldehyde emission ≤0.124mg/m3 (E1 grade), surface adhesion and impact resistance compliance for domestic dining furniture； 2. GB/T 24821-2009 General technical requirements for plastic furniture：Applicable to injection-molded ABS chair shells, requires load resistance, UV stability for indoor use, no sharp edges on all user contact surfaces； 3. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture：Applicable to all composite wood components, requires formaldehyde emission levels meeting E1 limits for indoor residential use； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具The Yiankang 4-Piece Tulip Style Round Bistro Dining Set pairs a single round dining table with three upholstered swivel armchairs, defined by a streamlined, sculptural mid-century modern aesthetic. All pieces feature a unified high-gloss white and matte white finish accented by bright red seat cushions, with a continuous pedestal design that eliminates protruding legs across every component. The round table sits at standard dining height, while each chair includes curved, integrated armrests formed as a seamless part of its outer shell, creating a cohesive visual profile suited to minimalist interiors. The tabletop is constructed with an MDF core finished in high-gloss white lacquer, with a smoothly rounded polished edge, supported by a powder-coated matte white steel central pedestal and weighted round base plate. Each chair features a matte white injection-molded ABS plastic shell that integrates armrests and curved back support, mounted to a matching powder-coated steel pedestal and round base fitted with a sealed steel ball-bearing swivel joint. Seat and back cushions use medium-firm polyurethane foam wrapped in polyester batting, upholstered in durable woven bright red polyester fabric. Non-slip black felt pads affixed to the underside of every base protect hard flooring surfaces during repositioning. Functional benefits include full 360-degree swivel movement for each chair with no tilt or height adjustment, and a smooth non-porous table surface that wipes clean easily with a damp cloth to support drinkware, reading materials, and light meal service. The freestanding pedestal layout maximizes leg room around the table and under seats while reducing tripping hazards, and chairs can be repositioned freely around the symmetrical round tabletop to suit changing layout needs. Seat cushions sit flush in molded recesses within each chair shell, removable for spot cleaning without visible fasteners. This set is well suited for both residential and light commercial spaces, including residential balcony lounges, small apartment dining nooks, studio apartment flexible seating zones, office break rooms, entry reception waiting areas, and small cafes serving light beverages and snacks. Its compact footprint fits constrned spaces without sacrificing comfortable clearance for adult users. Procurement teams should note that assembly requires only standard included hardware and no special tools, with shipments packaged to prevent transit damage across separate cartons for the table and individual chairs. Upholstery carries a light commercial suitable abrasion rating, and the low total net weight of the set allows easy repositioning by a single person. Buyers should confirm final material specifications directly with the supplier prior to finalizing bulk orders, as some construction details align with standard category configurations rather than verified supplier bill of materials data.
关注我们