纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	900 × 900 × 760 mm
Tabletop diameter	900 mm
Tabletop thickness	25 mm
Central pedestal column diameter	76 mm
Round base diameter	550 mm
Base thickness	8 mm
Under-table knee clearance height	710 mm
Leg clearance radius from column	412 mm
Edge profile radius	10 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net product weight	22 kg
Distributed static tabletop load capacity	136 kg
Recommended seating capacity	2 people
Surface scratch resistance rating	2 Class
Surface heat resistance	85 °C
Base anti-slip floor protection	Full perimeter rubber ring
Static stability tilt load	45 kg
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop substrate	18 mm thick MDF core
Tabletop surface layer	Oak wood veneer/low-pressure laminate
Tabletop edge banding	Matching oak PVC edge trim
Central support column	1.2 mm thick chrome-plated steel tube
Base disc	1.5 mm thick chrome-plated steel
Column-to-base connector	Die-cast zinc alloy fitting
Tabletop-to-column mounting plate	2 mm thick powder-coated steel
Floor protection pad	3 mm thick non-marking rubber ring
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Assembly method	Knock-down flat pack assembly
Surface functionality	Smooth non-porous sealed surface
Seating access	360-degree unobstructed leg access
Floor compatibility	Non-marking base suitable for hard floors
Placement adaptability	Freestanding design for flexible positioning
Hardware corrosion resistance	Multi-layer chrome plating on metal components
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Tabletop carton dimensions	920 x 920 x 160 mm
Base and column carton dimensions	570 x 570 x 780 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Compact apartment dining nooks	Small footprint fits 2-person dining in limited floor space
Indoor cafe and bistro seating	Durable chrome base fits casual commercial food service environments
Office breakout and tea areas	Provides casual seating for informal meetings or break times
Small balcony dining spaces	Stable freestanding design works for covered outdoor balcony use
Reception waiting area side use	Serves as a surface for refreshments and reading materials
Temporary event seating setups	Quick assembly and compact storage for pop-up events

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture for domestic use: tables, safety requirements
EN 15372:2016	Furniture for non-domestic use: tables, strength requirements

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture
GB/T 4893.8-2013	Furniture surface wear resistance test method
GB/T 10357.1-2013	Furniture mechanical test for tables

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture；
2. GB/T 4893.8-2013：Furniture surface wear resistance test method；
3. GB/T 10357.1-2013：Furniture mechanical test for tables；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · BST-RND80-CHR-OAK

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · BST-RND80-CHR-OAK

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · BST-RND80-CHR-OAK打开导出工具

页面快速操作

发布采购询价

产品描述

This Round Oak-Finish Top Chrome Pedestal Bistro Dining Table features a clean, balanced contemporary silhouette defined by a circular tabletop and a single central pedestal support anchored to a wide round disc base. The design eliminates obstructive corner legs, delivering 360-degree unobstructed leg access around the entire perimeter, with generous knee clearance to support comfortable seating. The warm oak wood grain finish of the top creates a soft visual contrast against the bright, reflective polished metal support structure, lending a versatile modern aesthetic that complements a broad range of interior design schemes.
The table is constructed with durable, service-ready materials. The tabletop is built on an engineered wood core, capped with an oak-finish surface layer of oak wood veneer or low-pressure laminate, and finished with matching oak PVC edge trim for a cohesive look. The central support column and disc base are formed from steel finished with multi-layer chrome plating for corrosion resistance, joined with a die-cast zinc alloy connector, and secured to the tabletop via a powder-coated steel mounting plate. The entire perimeter of the base is fitted with a thick non-marking rubber ring to protect hard floor surfaces from scuffs and slips. The smooth, non-porous sealed tabletop offers functional resistance to surface scratches and moderate heat contact for everyday use.
With a recommended seating capacity for two people, the table supports flexible placement across both residential and commercial spaces. It fits neatly into compact apartment dining nooks and small covered balcony areas where floor space is limited, works as durable casual seating for indoor cafes, bistros, office breakout and tea zones, serves as a refreshment and reading material surface in reception waiting areas, and supports quick deployment for temporary pop-up event setups thanks to its freestanding, position-flexible design. An integrated cable management feature accommodates power and data cables to keep surface areas uncluttered.
Procurement teams should note the product ships as a knock-down flat pack across two cartons per set, with straightforward on-site assembly. The stable base is rated for reliable static load support for standard dining and breakroom use, and the non-marking floor protection removes the need for additional felt pads for hard floor installations. The compact footprint and neutral finish make it easy to coordinate with a wide range of accompanying seating styles across different project types.

Round Oak-Finish Top Chrome Pedestal Bistro Dining Table Specifications

供应商与现货