纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2400 × 600 × 1100 mm
Staff work surface height	750 mm
Raised visitor counter height	1100 mm
Raised counter depth	300 mm
Staff work surface depth	600 mm
Plinth base height	100 mm
Stainless steel support post diameter	50 mm
Modesty panel height	1000 mm
Curved end radius	300 mm
Decorative recessed groove width	5 mm
Vase recess cutout diameter	120 mm
Finished Top Thickness	50 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Worktop static load capacity	150 kg
Drawer slide load rating (if fitted)	25 kg
Drawer slide cycle rating	50000 cycles
Door hinge cycle rating	80000 cycles
Recommended staff capacity	2
Net weight range	120 kg
Surface scratch resistance rating	2H
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Body and modesty panel	25 mm thick E1-grade high-density MDF with matte grey baked lacquer finish
Raised transaction countertop	25 mm thick E1-grade MDF with high-gloss white baked lacquer finish
Counter support posts	Mirror polished 304 stainless steel cylindrical tubes
Work surface edge banding	2 mm thick matching PVC edge banding
Plinth base	18 mm thick MDF with light grey matte lacquer finish
Internal cabinet panels	18 mm thick E1-grade particleboard with melamine laminate
Hardware components	Zinc alloy drawer pulls and steel screws with chrome plating
Cable management grommets	ABS plastic 60 mm diameter desk grommets with brush inserts
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Dual-level work surface	Lower 750mm surface for staff seated work, raised 1100mm counter for visitor transactions
Full front modesty panel	Solid panel running full desk height to conceal staff legs, equipment and lower storage from visitor view
Integrated cable management	Concealed internal cable channels and 60mm grommets route power/data cords from work surface to floor
Storage provision	Internal compartments for hanging drawers, mobile pedestal and file storage under staff work surface
Raised counter decorative recess	Built-in circular cutout on curved end to hold floral arrangements or branding displays
Curved end safety design	Smooth rounded right end eliminates sharp corners in high-traffic lobby areas
Adjustable floor glides	M8 threaded glides under plinth base compensate for uneven floor surfaces up to 15mm
Customizable layout option	Curved end can be specified on left or right side to match lobby floor plans
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	Main top 2500× 1050× 350 mm; return/pedestal packed separately
Reference Packaged Gross Weight	180 kg/set in 4 cartons
Reference Packaging Volume	1 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Corporate office lobby	Suitable for main entrance reception areas accommodating 2 staff with visitor transaction space
Hotel front check-in	Raised counter supports guest check-in, key handover and document exchange at standing height
Beauty salon and clinic reception	Smooth easy-clean lacquer surface and curved end support customer greeting and appointment check-in
Small service center reception	2.4m length fits compact entry spaces with integrated storage for office supplies
Co-working space entry	Dual-staff layout supports member check-in, package handling and visitor management

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-2:2002+A1:2019	Office work tables safety and strength requirements, applicable to staff work surface structural performance
EN 14073-2:2004	Office storage furniture safety requirements, applicable to integrated internal cabinet components
EN 13722:2004	Furniture test for surface resistance to dry heat, applicable to lacquered countertop performance verification

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to panel reception desk dimensional and structural tolerance testing
GB 18580-2017	Formaldehyde emission limit for wood-based panels, required E1 grade emission for indoor commercial furniture
GB/T 4893.8-2013	Surface abrasion resistance test for furniture finishes, applicable to lacquered worktop durability
GB/T 10357.1-2013	Furniture mechanical performance test for tables, applicable to worktop static and impact load verification

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to panel reception desk dimensional and structural tolerance testing；
2. GB 18580-2017：Formaldehyde emission limit for wood-based panels, required E1 grade emission for indoor commercial furniture；
3. GB/T 4893.8-2013：Surface abrasion resistance test for furniture finishes, applicable to lacquered worktop durability；
4. GB/T 10357.1-2013：Furniture mechanical performance test for tables, applicable to worktop static and impact load verification；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · REC-CURV2400-GW-SS

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · REC-CURV2400-GW-SS

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · REC-CURV2400-GW-SS打开导出工具

页面快速操作

发布采购询价

产品描述

The Curved End Dual-Tone Grey-White Reception Desk with Raised Transaction Counter features a sleek modern silhouette defined by a smoothly rounded end and a dual-tone matte grey and high-gloss white finish, presenting a polished, professional first impression. Its dual-level layout separates a lower staff work zone from an elevated visitor-facing counter, with a full-front modesty panel extending across the desk’s facade to conceal lower work areas, equipment, and stored items from guest view. The curved right end uses a soft rounded profile to eliminate sharp corners, while a subtle circular recess integrated into the curved end of the raised counter provides a dedicated spot for floral arrangements or branded displays. The desk is constructed with durable, commercial-grade materials suited to high-traffic use. The body and full-front modesty panel use E1-grade high-density MDF finished with matte grey baked lacquer, while the raised transaction counter features E1-grade MDF with a high-gloss white baked lacquer finish. Mirror-polished 304 stainless steel cylindrical posts support the raised counter, and all work surfaces are topped with hard laminate finished with matching PVC edge banding for long-lasting wear. The plinth base uses matte light grey lacquered MDF, with internal cabinet panels crafted from melamine-laminated E1-grade particleboard. Hardware includes chrome-plated zinc alloy drawer pulls and steel screws, with ABS cable management grommets fitted with brush inserts to organize cords. The primary structural panels measure 25mm thick, with a composite build-up on load-bearing top sections for added stability, and M8 threaded adjustable floor glides compensate for uneven floor surfaces. Practical functions are designed for smooth daily operations: the lower work surface supports seated staff tasks, while the raised counter accommodates standing visitor interactions such as check-in, document exchange, and key handover. Integrated internal cable channels route power and data cords from the work surface to the floor, and internal compartments under the staff work surface provide space to add hanging drawers, mobile pedestals, or file storage as operational needs require. The smooth lacquer surfaces offer straightforward cleaning to maintain a tidy appearance through frequent use. This reception desk is well-suited to a range of commercial spaces, including corporate office lobbies, hotel front check-in zones, beauty salon and clinic reception areas, compact service centers, and co-working space entries, with a layout that supports two staff members at a time. It fits compact entry footprints while providing dedicated transaction space for visitors. For procurement, note that the unit ships across multiple cartons, with a reference assembly time of 40 minutes per set. The product is unbranded, and storage accessories such as drawers and pedestals are sold separately to fit the pre-sized internal compartments. When planning installation, confirm the site can accommodate the desk’s footprint and packaged weight, and account for the unit’s static load capacity and hardware cycle ratings when selecting add-on storage components to ensure long-term functional fit for the intended space.

Curved End Dual-Tone Grey-White Reception Desk with Raised Transaction Counter Specifications

供应商与现货