纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	700 × 630 × 1060 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended static load	160 kg
Net weight	15 kg
Stacking quantity	0 chairs
Seating capacity	1 person
Daily-use rating	8 hours
Backrest static proof-load target	100 kg
Arm downward load target	45 kg per arm
Front-foot stability load	70 kg
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat and back upholstery	Beige padded leather-look surface over foam cushioning
Rear back panel	Black vertical accent panel with matching padded border
Arm pads	Black rectangular padded arm caps with 29 mm visible thickness
Arm supports	Black rigid support housing connected to a polished chrome upright
Cantilever frame	Polished chrome-plated bent steel tube forming a continuous sled base
Floor protection	Black non-slip pads at the four floor contact ends

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating adjustment	Fixed 440 mm seat height with no gas lift, tilt, swivel or height mechanism
Back support	Continuous high-back cushion with lumbar transition and upper-back support
Arm support	Fixed padded armrests provide forearm support and side-impact protection
Movement and storage	Cantilever sled base allows short repositioning on smooth floors but does not stack

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Meeting and visitor areas	Suitable for conference rooms, reception lounges and executive visitor seating due to fixed high-back support and 440 mm seat height.
Formal office settings	Pairs with desks or meeting tables in executive and consultation spaces where a non-swiveling, polished chrome guest chair is required.

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.1 通用办公椅

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · VC-HB-700630-CB

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · VC-HB-700630-CB

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · VC-HB-700630-CB打开导出工具

页面快速操作

发布采购询价

产品描述

The Padded High-Back Visitor Chair with Chrome Cantilever Base, model VC-HB-700630-CB, presents a formal guest-seating solution with a tailored, high-back silhouette and a polished metal base. Its beige leather-look upholstery gives the seat and back a refined appearance, while the black rear accent panel, black arm pads, and chrome frame create a structured two-tone profile suited to professional interiors. The continuous backrest rises to support the lumbar transition and upper back, and fixed armrests frame the seating area with rectangular padded caps. The clear width between armrests is 540 mm, and overall dimensions are 700 x 630 x 1060 mm. Comfort is built through layered cushioning rather than moving mechanisms. The finished seat cushion is 90 mm thick, the backrest padding is 70 mm thick, and the lumbar support zone is 240 mm high. A beige padded leather-look surface covers foam cushioning on the seat and back. The rear back combines a black vertical accent panel with a matching padded border. Each armrest uses a black padded cap with 29 mm visible thickness, supported by a black rigid housing connected to a polished chrome upright. The chair is supported by a polished chrome-plated bent steel tube formed into a continuous cantilever sled base. This fixed layout has no gas lift, tilt, swivel, or height adjustment, and the seat height remains fixed at 440 mm. The cantilever form allows short repositioning on smooth floors, while black non-slip pads at all four floor-contact ends help protect flooring. The chair is designed for one person, rated for eight hours of daily use, with a recommended static load of 160 kg. It does not stack, allowing storage plans to be based around individual chair placement rather than nesting. This visitor chair is appropriate for conference rooms, reception lounges, executive visitor seating, consultation spaces, and formal office settings where a non-swiveling guest chair can pair with desks or meeting tables. Its high-back shape and restrained beige, black, and chrome finish support both traditional and polished contemporary schemes. Procurement planning should note that the chair is unbranded and supplied as one set across two cartons, with a packaged gross weight of 23 kg and reference assembly time of 40 minutes per set. Reference carton dimensions are 850 x 420 x 720 mm, with carton volume of 0.26 cubic meters per set and indicative loading of 135 sets in a 20GP container at 85 percent space utilization. Buyers should also account for the fixed seat height, non-stacking design, leather-look upholstery, and matching room décor when specifying this model.

Padded High-Back Visitor Chair with Chrome Cantilever Base Specifications

供应商与现货