纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	700 × 700 × 1230 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	22 kg
Recommended user weight	150 kg
Static seat verification load	500 kg
Back dynamic durability	120,000 cycles
Seat sliding durability	100,000 cycles
Caster rolling durability	100,000 cycles
Gas lift cycles	200,000 height-adjustment cycles
Recommended daily occupancy	8 hours
Suggested upholstery abrasion acceptance	50,000 Martindale rubs
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Cream leather-look upholstery over padded cushioning; material grade is not legible and requires BOM confirmation
Back upholstery	Cream upholstered panel with horizontal seams and lower lumbar cushioning
Outer back shell	Walnut-toned bent wood or wood-composite shell with smooth exposed edge
Seat support shell	Rigid brown molded shell integrated with the back frame
Arm pads	Cream padded armrest tops bonded to curved brown structural supports
Arm support construction	Brown molded side supports linking arm pad, seat cradle, and back frame
Seat foam thickness	80 mm high-resilience molded foam
Back foam thickness	60 mm comfort foam over rigid backing
Foam density	45 kg/m3 seat foam and 35 kg/m3 back foam
Foam rebound	40 percent ball rebound
Internal frame	12 mm bent laminated board with 2 mm steel seat plate
Tilt mechanism	Black powder-coated steel multi-position mechanism

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel	Full 360-degree rotational seating on a central gas-lift and five-star base
Gas-assisted height adjustment	100 mm vertical seat-height travel controlled by the under-seat lever
Back recline	15-degree synchronized backward tilt with tension adjustment
Tilt lock control	One lever for lift and one control for tilt lock or tension selection
Fixed arm support	Curved non-adjusting padded armrests set 230 mm above the seat
Lumbar contact zone	Raised lower back cushion providing contact in the seated lumbar region
Upper back support	Separate upper padded panel supporting shoulders and upper back
Mobile base	Five twin-wheel casters allow rolling movement on hard floors or low-pile carpet
Weight-activated stability	Five-star radial base distributes recline load over a 700 mm footprint
Floor transition use	Soft polyurethane tread suitable for wood, tile, laminate, and carpet-protection mats
Back recline travel	15 degrees
Recline Angle / Lock Reference	125° with 3suggested lock positions

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Suits private manager and director offices where a high-back chair complements wood case goods
Private workstation	Provides 8-hour task support at a 760 mm executive desk
Meeting and conference room	Suitable for formal conference rooms requiring mobile, upholstered executive seating
Senior reception area	Can be used behind executive reception desks or in high-end consultation spaces
Home executive office	Fits residential offices using warm wood, neutral upholstery, and polished metal details
Project procurement	Recommended for projects requiring 10 or more matching executive chairs with replaceable casters and gas lifts
Hard-floor workspace	Best paired with wood, tile, laminate, or protected low-pile carpet using soft polyurethane casters
User profile	Designed for adult office users requiring high-back support, padded fixed arms, and recline during computer or discussion tasks

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Office seating safety	EN 1335:2020 office furniture, office chair dimensions and safety requirements
Office seating mechanical testing	EN 1335:2018 safety test requirements for office chairs
Office seating durability	EN 1335:2009 test methods for office chairs
Upholstery fabric abrasion	EN 14465:2003 upholstery fabrics performance specification
Formaldehyde for wood panels	EN 13986:2004+A1:2015 wood-based panels for construction use
Castor performance	EN 12527:1999 castors for manually operated swivel chairs

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Office chair safety and durability	ANSI/BIFMA X5.1:2017 office chairs standard
Backrest structural testing	ANSI/BIFMA X5.1:2017 Tests 8 through 13 for back force, durability, and release
Base and caster testing	ANSI/BIFMA X5.1:2017 Tests 2, 4, and 14 for stability, legs, and base loads
Arm load verification	ANSI/BIFMA X5.1:2017 Test 12 static and cyclic arm loads
Sustainability certification option	ANSI/BIFMA e2019furniture sustainability standard

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Office chair safety applicability	GB/T 28004.1:2021 office chair mechanical safety and dimensional requirements
Furniture structural durability	GB/T 10357.3:2013 chair and stool strength and durability test methods
Upholstery furniture labeling	GB/T 3324:2024 general technical requirements for wooden furniture
Formaldehyde control	GB 18580:2017 formaldehyde emission limit for wood-based panels
Flammability review	GB 17927:2018 requirements for flame retardancy of upholstered furniture soft furnishings

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Office chair safety applicability：GB/T 28004.1:2021 office chair mechanical safety and dimensional requirements；
2. Furniture structural durability：GB/T 10357.3:2013 chair and stool strength and durability test methods；
3. Upholstery furniture labeling：GB/T 3324:2024 general technical requirements for wooden furniture；
4. Formaldehyde control：GB 18580:2017 formaldehyde emission limit for wood-based panels；
5. Flammability review：GB 17927:2018 requirements for flame retardancy of upholstered furniture soft furnishings；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXEC-HB-CREAM-WAL-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXEC-HB-CREAM-WAL-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXEC-HB-CREAM-WAL-01打开导出工具

页面快速操作

发布采购询价

产品描述

The High-Back Executive Swivel Chair in cream and walnut presents a refined executive seating solution with a structured, high-back silhouette and a warm material palette. Its cream upholstery is paired with a walnut-toned bent wood or wood-composite outer shell, while the polished aluminum five-star base introduces a crisp metallic contrast. The backrest uses separate padded zones: an upper panel for the shoulders and upper back, and a raised lower-back cushion for lumbar contact. Horizontal seams on the upholstered back panel, a smooth exposed shell edge, and curved brown side supports give the chair a tailored, residential-inspired appearance. Construction combines cushioned comfort with a rigid supporting structure. The seat uses cream leather-look upholstery over an 80 mm high-resilience molded foam cushion, with a finished cushion thickness of 90 mm and foam density of 45 kg/m3. The back features 60 mm comfort foam over rigid backing, producing a 70 mm padded backrest and a 240 mm lumbar support zone. Beneath the seat is a rigid brown molded support shell integrated with the back frame. The fixed armrests have cream padded tops bonded to curved brown structural supports, with a 540 mm clear width between them. A black metal mechanism, central gas lift, polished aluminum five-star base, and polyurethane twin-wheel casters complete the chair. The upholstery material grade requires bill-of-materials confirmation. Functionally, the chair offers full 360-degree swivel and 100 mm of gas-assisted seat-height travel through an under-seat lever. The synchronized recline provides 15 degrees of backward tilt with tension adjustment, while a separate control handles tilt lock or tension selection. The fixed arm supports remain 230 mm above the seat, making the design best suited to users seeking supportive, non-adjusting armrests. Durability figures include a 150 kg recommended user weight, 500 kg static seat verification load, 120,000 back dynamic cycles, 100,000 seat-sliding cycles, 100,000 caster rolling cycles, and 200,000 gas-lift height-adjustment cycles. The chair suits private manager and director offices, formal meeting rooms, senior reception areas, consultation spaces, and high-end home executive offices. Its neutral upholstery and walnut finish coordinate with wood case goods and executive desks. Overall dimensions are 700 by 700 by 1230 mm, net weight is 22 kg, and packaged gross weight is 23 kg. Each set ships in two cartons with a reference assembly time of 40 minutes. Buyers planning matching projects should note the replaceable casters and gas lifts, confirm upholstery grade before order placement, and allow for receiving, assembly, and freight planning across multiple units.

High-Back Executive Swivel Chair with Cream Upholstery and Walnut Shell Specifications

供应商与现货