商品供应商Black Faux Leather Visitor Chair with Chrome Cantilever Frame and Padded Armrests，Black smooth-surface faux leather over padded panels
可联系供应商获取生产周期与报价。
PRODUCT MODULE 01 / 06
基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源：工厂资料结构化字段，最终以实测值为准
| 产品外部尺寸（宽 × 深 × 高） | 580 × 590 × 950 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源：产品性能数据，采购前请核对具体测试口径
| Recommended occupant weight | 160 kg | |
|---|---|---|
| Net weight per chair | 9.5 kg | |
| Seat load area | 0.230 m2 | |
| Static back-rest verification load | 91 kg | |
| Seating capacity | 1 person | |
| Floor glide count | 4 glides | |
| Cantilever flex test target | 100,000 cycles | |
| Stacking or nesting capacity | 0 units | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
PRODUCT MODULE 03 / 06
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源：以工厂材质清单与验货报告为准
| Seat and back upholstery | Black smooth-surface faux leather over padded panels | |
|---|---|---|
| Seat cushion | Molded polyurethane foam, 80 mm thick, on a board or steel seat support | |
| Back cushion | Contoured polyurethane foam pad, 70 mm thick at the center | |
| Load-bearing frame | Chrome-finish welded tubular steel cantilever frame with continuous side runners | |
| Arm supports | Curved chrome tubular steel rails with black padded arm tops | |
| Floor contacts | Four black non-marking polymer glides fitted to the runner ends |
PRODUCT MODULE 04 / 06
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源：功能配置参数，以供应商正式规格为准
| Fixed cantilever support | Continuous sled legs provide slight controlled flex while keeping seat height fixed at 465 mm | |
|---|---|---|
| Arm support function | Integrated padded arms provide 225 mm support above the seat and connect side frames to the back support | |
| Floor protection | Four polymer end glides isolate the chrome runners from hard floors and reduce lateral sliding | |
| Entry and positioning | Open front sled design permits front-facing access and close placement to meeting tables without casters |
PRODUCT MODULE 05 / 06
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源：外贸报价与装柜测算参考
| Gross weight per carton | 12.5 kg | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set |
PRODUCT MODULE 06 / 06
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源：依据产品结构与品类整理的推荐应用场景
| Meeting and conference rooms | Use around standard 760 mm meeting tables because the fixed 465 mm seat and 665 mm arm height support formal seated work. | |
|---|---|---|
| Reception and visitor areas | Suitable for guest seating in offices, clinics, and waiting zones where padded backs, arms, and hard-floor glides are required. |
STANDARD S1
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| Safety and strength requirements | Recommended references: EN 16139: | |
|---|---|---|
| Office chair safety test levels | EN 1335: use as a structural safety reference where applicable to fixed office seating | |
| Upholstery fabric abrasion | EN 14465: use to document abrasion, pilling, and colorfastness when coated-fabric test data are supplied |
STANDARD S2
北美市场采购验货参考 * ANSI/BIFMA 标准
美国及加拿大家具标准
| Occasional-use seating verification | ANSI/BIFMA X5.11: use for general-purpose occasional seating load and stability tests | |
|---|---|---|
| Business and institutional seating safety | ANSI/BIFMA X5.1: use selected static load, back strength, and leg-strength clauses |
STANDARD S3
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| Office chair mechanical safety | GB/T 28004.1: use for strength, dimensional stability, and safety verification of fixed office visitor seating | |
|---|---|---|
| Formaldehyde emission for wood-based panels | GB 18580: use if the seat board or internal backing contains wood-based panels | |
| Upholstery leather or coated fabric | GB/T 16799: use for faux-leather abrasion, flexibility, colorfastness, and tear checks |
招标文件标准化描述文本
本产品须满足以下技术参数要求： 1. Office chair mechanical safety：GB/T 28004.1: use for strength, dimensional stability, and safety verification of fixed office visitor seating； 2. Formaldehyde emission for wood-based panels：GB 18580: use if the seat board or internal backing contains wood-based panels； 3. Upholstery leather or coated fabric：GB/T 16799: use for faux-leather abrasion, flexibility, colorfastness, and tear checks； 最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告，可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块，文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具