纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	670 × 720 × 1220 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Chair net weight	21 kg
Recommended user weight capacity	150 kg
Recommended user stature range	190 cm; published value 190 cm
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound	40%
Upholstery abrasion acceptance target	50000 Martindale cycles
Gas-lift vertical stroke	100 mm
Tilt mechanism acceptance load	150 kg static
Warranty period	5 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Tan leather facing or leather-match cover with stitched perimeter seams
Backrest upholstery	Tan upholstered high-back shell divided into horizontal padded zones
Cushion core	Molded polyurethane foam, 90 mm seat and 60 mm back thickness
Internal load-bearing shell	12 mm molded plywood or reinforced polymer back shell
Seat support plate	2.5 mm powder-coated steel inner plate
Arm pads	Tan upholstered pads aligned with the seat front edge
Arm supports	Polished die-cast aluminum open-loop arm frames
Tilt mechanism	Black powder-coated steel multi-position mechanism
Gas lift	Chrome-plated steel telescoping gas lift with 50 mm outer tube
Five-star base	Polished die-cast aluminum five-spoke swivel base
Casters	Black nylon twin-wheel casters with hard tread and metal grip stems
Surface treatment	Polished aluminum finish on base and arms with blackened steel mechanism

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel	Full 360-degree rotational swivel around the central gas-lift axis
Pneumatic seat-height adjustment	Single lever controls 100 mm gas-lift travel from 460 to 530 mm seat height
Back tilt movement	Synchronized seat-and-back recline with a 15-degree maximum rearward angle
Tilt lock	One-position lock at upright posture, released by the under-seat control lever
Tension adjustment	Knob-regulated tilt resistance tuned for users up to 150 kg
Arm support	Fixed polished loop arms provide 230 mm support height above the seat and side impact protection
Mobility	Five 60 mm twin-wheel casters provide rolling movement on hard floors and low-pile carpet
High-back support	Continuous 760 mm back supports lumbar, thoracic, and shoulder regions
Seated entry	Open front under the arm loop provides 620 mm side entry clearance
Floor protection	Twin-wheel tread distributes load and reduces point pressure on finished floors
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Use behind a 2000 mm executive desk where the 760 mm high back conveys managerial presence
Managerial workstation	Suitable for 8 hour desk work with 100 mm height adjustment and 15-degree tilt support
Meeting and boardroom setting	Place around conference tables with 750 mm working height and generous arm clearance
Consultation room	Use for client-facing meetings where tan upholstery and a tall tailored back create a professional appearance
Private home office	Recommended for users seeking executive styling on hard floors or low-pile carpet
Interior color scheme	Coordinate with walnut, oak, black, white, or warm-neutral desks and shelving
Procurement configuration	Specify hard-floor casters for polished floors or soft-wheel brake casters for open offices
Seating density limitation	One person per chair, with a 150 kg maximum user-load acceptance target

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Office chair structural safety	EN 1335:2018 safety, stability, and structural requirements for office task seating
Office chair dimensions	EN 1335:2020 dimensional determination and adjustment ranges
Office chair durability	EN 1335:2009 test methods for strength and durability
Furniture components emissions	EN 16516 volatile organic compound emissions test method

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Office chair safety and durability	ANSI/BIFMA X5.1 office chairs, including safety, static load, fatigue, and stability tests
Base and caster load verification	ANSI/BIFMA X5.1 base test, caster test, and chair stability sections for 150 kg user-load target
Sustainable procurement option	ANSI/BIFMA e3 furniture sustainability standard for material, energy, and human-health credits
Low-emission verification	ANSI/BIFMA X7.1 formaldehyde and total aldehyde emissions for seating components

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Office chair safety applicability	GB/T 28004swivel office chair safety, stability, strength, and durability acceptance
Formaldehyde emission applicability	GB 18580formaldehyde emission for wood-based panels in the seat shell

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Office chair safety applicability：GB/T 28004swivel office chair safety, stability, strength, and durability acceptance；
2. Formaldehyde emission applicability：GB 18580formaldehyde emission for wood-based panels in the seat shell；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EH-HB-CARAMEL-ALU-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EH-HB-CARAMEL-ALU-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EH-HB-CARAMEL-ALU-01打开导出工具

页面快速操作

发布采购询价

产品描述

The High-Back Brown Leather Executive Swivel Chair with Polished Aluminum Base presents a formal executive seating profile through its tall tan upholstered back, tailored horizontal padding, and polished metallic frame. The high-back shell is divided into padded zones, while the seat carries perimeter stitching and matching tan arm pads. Open-loop polished die-cast aluminum arm supports connect visually with the five-star aluminum base, giving the chair a refined appearance suited to managerial interiors. The fixed arms provide side support and leave generous clearance between them. Construction combines padded upholstery with a structured load-bearing interior. The seat and back use tan leather facing or leather-match upholstery over molded polyurethane foam. The seat cushion is 90 mm thick, and the backrest padding is 70 mm thick, with a defined lumbar support zone. Underneath, a molded plywood or reinforced polymer back shell supports the user, while a powder-coated steel inner plate reinforces the seat. The black steel multi-position tilt mechanism, chrome-plated telescoping gas lift, polished die-cast aluminum base, and black nylon twin-wheel casters complete the functional assembly. Designed for active desk use, the chair rotates through a full 360 degrees and uses a single under-seat lever for pneumatic height adjustment across 100 mm of travel. The synchronized seat-and-back recline reaches a 15-degree rearward angle, with an upright lock controlled by the same lever area and a knob for tilt resistance. Fixed loop arms offer support above the seat, and the five twin-wheel casters allow movement across hard floors and low-pile carpet. The recommended weight capacity is 150 kg, and the published stature value is 190 cm. This model fits executive offices, managerial workstations, boardrooms, consultation rooms, and private home offices. Its tan finish coordinates with walnut, oak, black, white, or warm-neutral desks and storage. It is especially appropriate where a professional client-facing impression and traditional executive styling are priorities. Buyers should note that the product is unbranded and supplied as one set in two cartons. Assembly is referenced at 40 minutes per set, with a packaged gross weight of 23 kg. The listed abrasion target is 50,000 Martindale cycles, which should be reviewed against expected daily use. Procurement teams planning multiple offices can use the stated 20GP loading figure for preliminary logistics, while confirming final packing and upholstery composition before ordering.

High-Back Brown Leather Executive Swivel Chair with Polished Aluminum Base Specifications

供应商与现货