纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	680 × 700 × 1180 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	22 kg
Rated user weight	150 kg
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound	40%
Fabric or leather thickness	1.2 mm
Abrasion resistance	50,000 Martindale cycles
Color count	1 visible blue color
Seating capacity	1 person
Warranty	5 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer upholstery	Blue leather or leather-look upholstery over padded seat and back
Seat cushion	90 mm molded polyurethane foam at 45 kg/m3 target density
Back cushion	70 mm contoured polyurethane foam at 35 kg/m3 target density
Internal seat shell	12 mm molded plywood or reinforced polymer seat board
Back inner frame	18 mm tubular steel or molded composite back frame
Arm frames	Polished cast or bent aluminum loop arms with padded upper rails
Five-star base	Polished aluminum five-spoke base with 2.5 mm nominal wall section
Gas lift	Chrome-plated steel class 4 gas lift, 50 mm outer tube
Tilt mechanism	Black powder-coated steel synchro-tilt mechanism
Casters	Black nylon twin-wheel casters with steel mounting stems
Joint hardware	Zinc-plated steel bolts, washers and threaded inserts
Seam construction	Tailored stitched panel with horizontal upper-back seam

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel	Full 360-degree rotation around the central gas-lift axis
Seat height adjustment	Pneumatic lift with 70 mm travel from 450 to 520 mm
Synchro recline	Back reclines through 15 degrees while the seat tilts through 6 degrees
Recline lock	Lockable mechanism with 3 angular positions and upright-release safety target
Tension adjustment	Knob-controlled tilt tension calibrated for users up to 150 kg
Fixed arm support	Polished loop arms provide fixed upper-limb support at 230 mm above the seat
Mobility	Five twin-wheel casters provide rolling movement on hard floors or low-pile carpet
Lumbar posture zone	Contoured lower-back channel supports the lumbar region without a separate pillow
High-back shoulder support	720 mm padded back supports shoulder and upper-back contact
Seat-edge pressure relief	Rounded waterfall front cushion reduces thigh pressure
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Suitable behind a manager desk where the tall blue back and polished arms create a formal meeting position.
Private workstation	Supports full-day computer and discussion tasks with swivel, recline and height adjustment.
Conference room	Use as a premium visitor or leadership chair around a boardroom table.
Hotel business center	Fits upscale executive lounges requiring a refined leather-look appearance and mobile base.
Professional consulting rooms	Provides upright support for advisors, legal offices and client consultations.
Formal reception setting	Blue upholstery and polished aluminum suit modern corporate reception areas.
Single-user deployment	Designed for one user per chair and should not be used as a multi-person bench.
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Office furniture safety	EN 1335:2020 dimensions and safety requirements for office work chairs
Mechanical safety and performance	EN 1335:2018 safety requirements for office work chairs
Durability test method	EN 1335:2009 test methods for office work chairs
Upholstered seating strength	EN 1728:2012 test methods for strength and durability of seating
Office seating ergonomics	EN 1335ergonomic requirements for task chairs

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Office chair safety and durability	ANSI/BIFMA X2017 general-purpose office chairs
Base load verification	ANSI/BIFMA X5.1 Test 4 five-star base static and cyclic evaluation
Caster durability	ANSI/BIFMA X5.1 caster and mobility test requirements
Back-rest strength	ANSI/BIFMA X5.1 back-rest static and cyclic load tests
Arm strength	ANSI/BIFMA X5.1 arm vertical and horizontal load tests

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Safety and dimensions review	GB/T 3324 general technical requirements for wooden furniture
Upholstered furniture durability	GB/T 27925strength and durability test methods for upholstered furniture
Leather material check	GB/T 16799furniture leather test methods
Formaldehyde emission	GB 18580formaldehyde emission for wood-based panels
Office chair safety	GB/T 26703office chair stability, strength and durability

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Safety and dimensions review：GB/T 3324 general technical requirements for wooden furniture；
2. Upholstered furniture durability：GB/T 27925strength and durability test methods for upholstered furniture；
3. Leather material check：GB/T 16799furniture leather test methods；
4. Formaldehyde emission：GB 18580formaldehyde emission for wood-based panels；
5. Office chair safety：GB/T 26703office chair stability, strength and durability；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · HB-EXEC-BLU-CHR

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · HB-EXEC-BLU-CHR

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · HB-EXEC-BLU-CHR打开导出工具

页面快速操作

发布采购询价

产品描述

The High-Back Blue Leather Executive Swivel Chair is a formal executive seating solution with a tall padded back, broad blue leather-look upholstery, and polished aluminum detailing. Its high-back silhouette creates a commanding position behind a desk, while the matching padded seat and back, loop-style arm frames, and five-spoke polished base give the chair a refined, professional appearance. The fixed padded armrests provide defined upper-limb support, and the clear width between them supports a spacious seating layout without detracting from the chair's structured executive form. Construction combines comfort-focused cushioning with a durable support structure. The seat uses a 90 mm molded polyurethane cushion at a 45 kg/m3 target density, while the contoured back cushion is 70 mm thick at a 35 kg/m3 target density. High-resilience foam offers a balanced padded feel, and the blue upholstery is specified at 1.19 mm thickness with an abrasion rating of 50,000 Martindale cycles. Internally, the seat is supported by a molded plywood or reinforced polymer board, and the back uses a tubular steel or molded composite frame. Polished cast or bent aluminum forms the arm frames and five-star base, paired with a chrome-plated class 4 gas lift and a black powder-coated steel synchro-tilt mechanism. Functional features are designed for daily desk and meeting use. The chair rotates a full 360 degrees and adjusts pneumatically through 70 mm of seat-height travel. The synchro mechanism allows the back to recline through 15 degrees while the seat tilts through 6 degrees, with three lockable angular positions and a knob for tilt tension adjustment. Five black twin-wheel casters provide mobility on hard floors and low-pile carpet. The chair is rated for users up to 150 kg and has a net weight of 22 kg. It is well suited to executive offices, private workstations, conference rooms, hotel business centers, professional consulting rooms, and formal corporate reception areas. The blue finish works especially effectively where a modern leadership look is desired, while the polished metal components reinforce a polished commercial presentation. For procurement, buyers should plan for two cartons per set, 40 minutes of assembly time, and a packaged gross weight of 23 kg. The listed carton volume is 0.26 cubic meters per set, supporting straightforward bulk-container planning. As an unbranded model, it is appropriate for projects prioritizing appearance, adjustable function, and consistent executive styling over a branded label.

High-Back Blue Leather Executive Swivel Chair Specifications

供应商与现货