纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	680 × 720 × 1080 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	22 kg
Recommended user weight capacity	160 kg
Suitable user stature	190 cm
Recommended daily usage	8 hours
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound resilience	40%
Gas lift cycles	100000 cycles
Caster rolling durability	100000 cycles
Warranty period	5 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer seat shell	Tan upholstered composite or molded plywood shell with soft padded facing
Seat cushion	High-resilience polyurethane foam, 80 mm thick, wrapped under tan upholstery
Back cushion	Molded polyurethane foam, 60 mm thick, with vertical channel tufting
Upholstery type	Tan leather-grain surface with tailored sewn panels
Upholstery thickness	1.2 mm
Abrasion resistance target	50000 Martindale cycles
Integrated arm pads	Tan upholstered padded arms formed as continuous side wings
Internal back support	12 mm molded structural board or bentwood liner
Seat support board	12 mm molded plywood or composite seat pan
Five-star base	Polished cast aluminum or aluminum-alloy five-star base
Base wall thickness	3.0 mm
Tilt mechanism and gas lift	Black powder-coated steel tilt plate with 50 mm chrome gas lift

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel	Full 360-degree swivel around the gas-lift center for multitasking at a desk
Seat height adjustment	Pneumatic height adjustment with an 80 mm stroke and right-side lever
Back tilt movement	Synchronized recline through the black under-seat tilt mechanism with up to 15-degree back travel
Tilt lock	Multi-position lock plate with 3 lockable recline positions and free-float mode
Tilt tension control	Rotary tension knob adjusts resistance for users up to 160 kg
Integrated arm support	Fixed wraparound upholstered arms provide forearm support at 220 mm above the seat
Mobility	Five black twin-wheel casters support rolling movement on hard floors and low-pile carpet
Lumbar contour	Vertical pleated lower-back channel provides passive lumbar contour without separate adjustment
Seat rotation bearing	Class 4 gas-lift bearing carries swivel and height loads with 100 mm center column travel
Color availability	1 visible tan color option
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Gross weight per carton	25 kg
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Private executive office	Suitable behind an executive desk where the tan wraparound shell provides a polished meeting and focused-work appearance
Manager workstation	Appropriate for daily computer and discussion use by managers requiring swivel access and padded arm support
Meeting or boardroom setting	Can be used as a visitor or conference chair around low-frequency meeting tables with 760 mm surfaces
Hotel business center	Fits executive lounges or business suites needing a refined leather-look chair with durable single-shift seating
Private consulting room	Suitable for legal, financial, or advisory rooms where clients and staff need comfortable 60 minute seated discussions
Recommended desk height	740 mm
Floor compatibility	Recommended for hardwood, tile, vinyl, and low-pile carpet with 60 mm twin-wheel casters
Recommended quantity configuration	1 chair per workstation or 2 visitor chairs per 1800 mm meeting table

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Office seating safety	Recommended references: EN 1335:2020, EN 1335:2018
Office seating stability	EN 1022:2018 domestic furniture seating stability may be used as a stability test reference
Upholstered furniture flammability	EN 1021:2014 cigarette ignition and EN 1021:2014 match-flame tests may be specified for upholstered components
Castor performance	EN 12527:1998 castor requirements and test methods may apply to the five twin-wheel casters

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Office chair safety and durability	ANSI/BIFMA X2017office chairs may be specified for static, dynamic, swivel, tilt, and caster testing
Low-chemical emissions	ANSI/BIFMA e2019furniture sustainability standard may be specified for chemical and material credits
Base and gas lift load acceptance	BIFMA X5.1 static load and base-load tests can validate the 700 mm five-star base and center column
Caster durability acceptance	BIFMA X5.1 caster and mobility tests can validate the five 60 mm twin-wheel casters

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Office chair safety applicability	GB/T 3324wooden furniture general technical requirements may apply to any structural board or wood components
Upholstered furniture durability	GB/T 28202furniture quality inspection terminology may support inspection definitions for upholstered office seating
Indoor environmental testing	GB/T 35607 green product furniture evaluation may be specified for low-emission office procurement

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Office chair safety applicability：GB/T 3324wooden furniture general technical requirements may apply to any structural board or wood components；
2. Upholstered furniture durability：GB/T 28202furniture quality inspection terminology may support inspection definitions for upholstered office seating；
3. Indoor environmental testing：GB/T 35607 green product furniture evaluation may be specified for low-emission office procurement；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXEC-MB-TAN-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXEC-MB-TAN-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXEC-MB-TAN-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Tan Upholstered Mid-Back Swivel Executive Chair presents a refined executive-office silhouette with a tan wraparound seating shell, tailored sewn upholstery panels, and continuous padded side wings that form integrated armrests. Its mid-back profile includes vertical channel tufting, giving the chair a structured, formal appearance while maintaining a compact footprint behind a desk. The polished aluminum five-star base adds a bright visual contrast to the tan upholstery and black under-seat tilt mechanism, while twin-wheel casters complete the mobile office-chair layout. Model EXEC-MB-TAN-01 is offered as an unbranded executive seating solution. Construction centers on a tan upholstered composite or molded plywood shell with a soft padded facing. The seat uses a molded plywood or composite seat pan, while the back incorporates a molded structural board or bentwood liner. Cushioning consists of high-resilience polyurethane foam in the seat and molded polyurethane foam in the back, both enclosed by a tan leather-grain surface. Fixed wraparound arm pads are upholstered to match the seat and back, creating a cohesive shell rather than separate hard arm components. The polished aluminum base supports the chair through a gas-lift center, black metal tilt mechanism, and five black twin-wheel casters. Functionally, the chair provides full 360-degree swivel movement and pneumatic seat-height adjustment operated by a right-side lever. The synchronized recline mechanism allows up to 15 degrees of back travel, with three lockable recline positions, a free-float mode, and a rotary tension knob for adjusting resistance. The fixed arm support sits 220 mm above the seat, and the chair is rated for a recommended user weight capacity of 160 kg, a suitable user stature of 190 cm, and daily use up to 8 hours. Its casters are intended for hard floors and low-pile carpet. This model is well suited to private executive offices, manager workstations, meeting or boardroom spaces, hotel business centers, executive lounges, and private consulting rooms. It pairs with a 740 mm desk height and can also be used around 760 mm meeting-table surfaces. The tan finish gives legal, financial, advisory, and conference settings a polished leather-look appearance without moving away from a practical task-chair format. Procurement teams should note that one set ships across two cartons, with reference assembly time of 40 minutes per set. The listed packaged gross weight is 23 kg per set, while gross weight per carton is 25 kg. Overall dimensions are 680 x 720 x 1080 mm, and reference carton dimensions are 850 x 420 x 720 mm. Buyers comparing options should review upholstery composition, floor type, assembly planning, desired tilt control, and whether the fixed wraparound arms fit the intended work surface.

Tan Upholstered Mid-Back Swivel Executive Chair Specifications

供应商与现货