纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	680 × 700 × 1180 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	150 kg
Net weight	18 kg
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam resilience	40%
Fabric or leatherette thickness	1.2 mm
Seam stitch pitch	8 stitches per 25 mm
Gas-lift service rating	Class 4
Swivel durability	100,000 cycles
Caster rolling durability	100,000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Beige padded fabric or leatherette cover over foam; exact hide or textile requires supplier BOM confirmation
Backrest upholstery	Beige padded upholstered panel with one horizontal seam and tapered shoulder contour
Back outer shell	Dark green-black formed back shell with contrasting edge trim
Arm pads	Beige upholstered continuous loop pads wrapping from front support to rear bracket
Arm inner support	Dark molded or metal-reinforced bracket with textured side insert and bright lower trim
Seat support plate	Black steel or reinforced polymer mechanism housing beneath the cushion
Gas lift	Black outer sleeve with polished chrome-plated telescopic tube
Five-star base	Polished aluminum-style metal five-star base with five radiating legs
Casters	Black hard-wearing nylon or polyurethane twin-wheel swivel casters, five total
Internal back frame	12 mm steel-reinforced or molded composite inner support recommended for BOM confirmation
Internal seat board	12 mm molded plywood or engineered composite seat carrier recommended for BOM confirmation
Fasteners and pivots	Zinc-plated steel bolts, washers, and pivot bushings recommended for procurement specification

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seat height adjustment	100 mm gas-lift travel from 460 to 560 mm seat height, operated by a side paddle
360-degree swivel	Full rotation around the gas-lift center with no indexed stopping point
Back tilt movement	Synchronized recline through 15 degrees with weighted tension adjustment
Tilt lock	One-position upright lock controlled by a side lever for desk work
Fixed arm support	Rigid loop arms provide elbow support but do not adjust in height, width, or pivot
Caster mobility	Five 50 mm twin-wheel casters enable rolling on carpet tiles, wood, and hard office floors
Lumbar contact	Integrated lower-back contour gives passive support without an adjustable lumbar pad
Recline tension control	Manual tension knob adjusts resistance for users up to 150 kg
Assembly requirement	Back, seat, arms, gas lift, base, and casters require on-site joining with supplied hardware
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Private manager office	Formal beige high-back chair pairs with executive desks in 10 to 20 square meter private offices
Meeting and conference room	Suitable around boardroom tables where upright support and consistent visual styling are required
Open-plan workstation upgrade	Use at senior employee workstations requiring swivel access, height adjustment, and mobility
Reception consultation setting	Placed behind reception or consultation desks for a polished neutral interior look
Executive home office	Appropriate for dedicated home workrooms used 4 to 8 hours daily
Recommended floor surfaces	Use on low-pile carpet, vinyl, tile, laminate, or sealed wood floors with caster type matched to floor
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 applicability	Use office chair dimensional requirements to assess seat, back, clearance, and adjustment geometry
EN 1335-2 applicability	Specify safety, structural integrity, and stability tests for the finished adjustable chair
EN 1335-3 applicability	Use test methods for strength, durability, and mechanism verification during procurement inspection
EN 1022 applicability	Use determination of furniture stability for forward, rearward, and sideways loading

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 Office Chairs applicability	Applicable standards and test results require confirmation

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2024 applicability	Use general wooden-furniture dimensional and structural inspection requirements if upholstery substrate includes wood components
GB/T 10357.3 applicability	Apply furniture strength and durability test methods for back and seat loading during acceptance
GB 28007 applicability	Use children's furniture requirements only when the order is specifically supplied for child-use areas
GB/T 24430.2 applicability	Reference adjustable office-chair mechanical tests for swivel, stability, and durability acceptance

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2024 applicability：Use general wooden-furniture dimensional and structural inspection requirements if upholstery substrate includes wood components；
2. GB/T 10357.3 applicability：Apply furniture strength and durability test methods for back and seat loading during acceptance；
3. GB 28007 applicability：Use children's furniture requirements only when the order is specifically supplied for child-use areas；
4. GB/T 24430.2 applicability：Reference adjustable office-chair mechanical tests for swivel, stability, and durability acceptance；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXEC-HB-LOOP-680-BE

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXEC-HB-LOOP-680-BE

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXEC-HB-LOOP-680-BE打开导出工具

页面快速操作

发布采购询价

产品描述

The High-Back Padded Executive Swivel Chair with Fixed Loop Arms is an unbranded executive office chair designed for professional settings that call for a formal, polished appearance. Its beige padded upholstery gives the seat and tall backrest a neutral presence, while the dark green-black formed outer shell, contrasting edge trim, and polished aluminum-style five-star base provide a structured visual contrast. The backrest uses an upholstered panel with one horizontal seam and a tapered shoulder contour, and the continuous beige arm pads wrap from the front supports to the rear brackets. Dark molded or metal-reinforced arm supports include textured side inserts and bright lower trim, creating a balanced executive look suited to private offices and conference spaces. Comfort is built around layered padding and controlled support. The finished seat cushion is 90 mm thick with 45 kg/m3 foam, and the backrest has 70 mm of 35 kg/m3 padding, with a 240 mm lumbar support zone. A passive lower-back contour provides contact without a separate adjustable pad. Upholstery is listed as beige fabric or leatherette at 1.2 mm thickness; the precise material composition requires confirmation against the supplier bill of materials. Stitching is specified at 8 stitches per 25 mm. The overall dimensions are 680 x 700 x 1180 mm, with 540 mm of clear width between the fixed armrests. Functionality supports typical desk and meeting tasks. A side paddle controls 100 mm of gas-lift travel, giving a seat height range from 460 to 560 mm. The chair rotates 360 degrees without indexed stopping, while the synchronized backrest reclines through 15 degrees and includes weighted tension adjustment plus a one-position upright lock operated by a side lever. The rigid loop arms offer fixed elbow support and do not adjust in height, width, or pivot. Mobility is provided by five 50 mm black twin-wheel swivel casters in hard-wearing nylon or polyurethane, mounted to the polished metal-style five-star base. The recommended user weight capacity is 150 kg, and the chair net weight is 18 kg. This model fits manager offices, boardroom and conference settings, senior open-plan workstations, reception or consultation desks, and dedicated executive home offices used for daily work. It is intended for low-pile carpet, vinyl, tile, laminate, or sealed wood floors, with caster type matched to the floor surface. Procurement planning should account for delivery as one set in two cartons, with packaged gross weight of 23 kg, carton dimensions of 850 x 420 x 720 mm, and carton volume of 0.26 m3 per set. Reference assembly time is 40 minutes per set, and indicative 20GP loading is 135 sets at 85 percent space utilization. Buyers should confirm exact upholstery material and floor-specific caster specification before order placement.

High-Back Padded Executive Swivel Chair with Fixed Loop Arms Specifications

供应商与现货