纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	660 × 680 × 1020 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	18.5 kg
Recommended user weight capacity	150 kg
Static seat verification load	600 kg
Gas-lift service class	Class 4, 50 mm outer tube, 100 mm stroke
Tilt mechanism fatigue target	100,000 cycles
Caster rolling durability target	100,000 cycles
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Recommended occupant height range	1850 mm
Warranty target	5 years structural, 2 years upholstery and casters

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Cognac leather-look upholstery over padded cushion
Backrest upholstery	Cognac upholstered front panel with vertical seam detailing
Outer back shell	Black rigid molded back panel with sculpted side profile
Seat cushion	80 mm molded polyurethane foam with rounded waterfall front
Back cushion	60 mm contoured polyurethane foam pad with lumbar shaping
Arm pads	Cognac upholstered fixed pads with rounded contact surface
Arm supports	Polished die-cast aluminum curved supports with black inner bracket
Center gas lift	Chrome-plated steel telescopic cylinder with 50 mm outer tube
Tilt mechanism	Black painted steel multi-position mechanism under the seat
Five-star base	Polished aluminum five-star swivel base with 680 mm footprint
Casters	Black-and-silver twin-wheel nylon casters with steel axle insert
Internal seat support	12 mm molded plywood or steel seat plate with 2 mm reinforcement

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Swivel function	360-degree swivel around the central gas-lift axis
Seat height adjustment	Pneumatic lever adjustment with 100 mm lift stroke
Back tilt movement	Synchronized recline with 18-degree maximum tilt and tension control
Tilt lock	3-position lock including upright, mid-recline, and free-tilt mode
Lumbar support	Contoured padded lumbar zone integrated into fixed mid-back
Arm support	Fixed padded armrests at 710 mm floor height for desktop forearm support
Mobility	Five 60 mm twin-wheel casters enable rolling on hard floors and low-pile carpet
Recline tension	Manual tension knob adjusts resistance for user body weight up to 150 kg
Seat-return behavior	Spring-assisted mechanism returns backrest to upright position after unlocking
Floor protection	Soft-wheel caster option recommended for wood, tile, and vinyl floors
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Suitable behind a 2000 mm executive desk where cognac upholstery conveys a premium private-office look.
Manager workstation	Fits 760 mm desk height and supports daily computer, meeting, and phone tasks.
Meeting room	Usable at conference tables for participants up to 150 kg, with rolling access and 360-degree swivel.
Professional services suite	Appropriate for legal, consulting, financial, and hospitality offices requiring a warm leather-look appearance.
Hard-floor workspace	Specify soft twin-wheel casters for wood, tile, polished stone, or vinyl flooring to reduce marks and noise.
Carpeted private office	Standard twin-wheel casters work on low-pile carpet; chair mats are recommended for dense high-pile carpet.
Procurement configuration	Order black, gray, or cognac upholstery as a 3-color program while retaining the same aluminum base and mechanism.
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1:2020 office furniture seating dimensions	Defines dimensional suitability and should be used to verify seat height, depth, back support, and clearance.
EN 1335-2:2018 office furniture seating safety requirements	Applies to structural safety, stability, shear points, and mechanism safety for production units.
EN 1335-3:2020 office furniture seating test methods	Provides static, durability, impact, and caster test methods for factory acceptance.
EN 1022:2018 seating stability	Applies to front, rear, and sideways stability verification on the five-star swivel base.

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 static load acceptance	Use the standard's proof-load protocol rather than treating the listed 600 kg value as certification.
ANSI/BIFMA e3-2019 furniture sustainability	Optional procurement framework for materials, upholstery chemistry, energy, and supplier social responsibility.

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2024 dimensional and structural inspection	Applies to general wooden furniture dimensions, workmanship, and inspection where upholstered chair components use board substrates.
GB/T 10357.3-2013 furniture strength test	Applies to seat and back static-load and fatigue verification for office seating procurement acceptance.
GB/T 27924-2011 industrial enterprise warehouse logistics	Provides packaging, handling, and storage guidance relevant to bulk chair delivery.

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2024 dimensional and structural inspection：Applies to general wooden furniture dimensions, workmanship, and inspection where upholstered chair components use board substrates.；
2. GB/T 10357.3-2013 furniture strength test：Applies to seat and back static-load and fatigue verification for office seating procurement acceptance.；
3. GB/T 27924-2011 industrial enterprise warehouse logistics：Provides packaging, handling, and storage guidance relevant to bulk chair delivery.；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXEC-MB-COG-AL5

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXEC-MB-COG-AL5

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXEC-MB-COG-AL5打开导出工具

页面快速操作

发布采购询价

产品描述

Balancing executive presence with everyday task support, this cognac mid-back swivel chair brings a warm, tailored appearance to professional interiors. Its upholstered seat and front back panel use a cognac leather-look finish, with vertical seam detailing on the backrest and a black rigid molded outer shell that creates a sculpted side profile. Fixed rounded arm pads continue the cognac upholstery, while polished die-cast aluminum supports and a matching five-star base provide a refined metallic contrast. The chair presents a compact executive silhouette, with padded seating, a contoured lumbar zone, and an organized layout suited to desk-facing work as well as relaxed meeting posture. Comfort is built through layered padding rather than loose cushions. The seat uses molded polyurethane foam with a rounded waterfall front, paired with a contoured polyurethane back pad shaped for lumbar support. Padding thickness is 90 millimeters at the finished seat cushion and 70 millimeters at the backrest, with a 240-millimeter lumbar support zone. Underneath, a black painted steel multi-position mechanism connects to a chrome-plated steel telescopic gas lift. Polished aluminum forms the visible arm supports and base, while nylon twin-wheel casters complete the mobile structure. The overall dimensions are 660 by 680 by 1020 millimeters, with 540 millimeters of clear width between armrests. Functional features support a full range of office movement. The chair rotates 360 degrees around the central gas-lift axis, and pneumatic height adjustment provides a 100-millimeter lift stroke. The synchronized recline reaches an 18-degree maximum tilt, includes tension control, and can be locked in an upright position, mid-recline setting, or free-tilt mode. Fixed padded armrests sit at 710 millimeters floor height for forearm support at a standard desk. Five twin-wheel casters allow rolling on hard floors and low-pile carpet, making the chair practical for private offices, open manager workstations, conference rooms, and professional services settings such as legal, consulting, financial, or hospitality spaces. Specification is straightforward for commercial and residential buyers. The chair has an 18.5-kilogram net weight, a recommended user weight capacity of 150 kilograms, and 45-kilogram-per-cubic-meter seat foam density. Its Class 4 gas lift uses a 50-millimeter outer tube, while the tilt mechanism and casters carry 100,000-cycle durability targets. Each set ships in two cartons with a packaged gross weight of 23 kilograms and a reference assembly time of 40 minutes. Buyers furnishing wood, tile, polished stone, or vinyl floors should specify soft twin-wheel casters to reduce marks and noise; for dense high-pile carpet, a chair mat is recommended. The warm cognac finish pairs particularly well with wood desks and private-office layouts seeking a polished, premium look.

Cognac Leather Mid-Back Executive Swivel Chair with Polished Aluminum Base Specifications

供应商与现货