纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	610 × 680 × 1170 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	150 kg
Net weight	18 kg
Seat foam density	45 kg/m³
Back foam density	35 kg/m³
Foam rebound rating	40%
Fabric or leather surface thickness	1.2 mm
Upholstery abrasion resistance	50,000 Martindale cycles
Seam stitch pitch	8 stitches per 50 mm
Caster rolling durability	100,000 cycles
Suggested warranty	36 months

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Black smooth-faced upholstery with horizontal channel stitching and padded ribs
Back upholstery	Black ribbed padded panel with a smooth upper lumbar section
Seat cushion	Molded cut foam over a rigid load-bearing seat board
Back cushion	Segmented foam or padded rib inserts attached to a framed back board
Outer back frame	Polished aluminum or chrome-finished tubular perimeter frame with slim side profile
Armrests	Polished one-piece tubular aluminum loop arms with continuous back-to-seat support
Arm pads	Integrated black padded contact surfaces following the tubular arm curve
Seat undercarriage	Black steel tilt mechanism with visible operating levers under the seat
Gas lift	Chrome-plated steel telescopic cylinder with a 50 mm outer tube
Five-star base	Polished die-cast aluminum five-star base with curved spokes
Casters	Black twin-wheel swivel casters with hard or soft tread option
Internal structural board	12 mm hardwood-composite or molded seat support board

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Swivel function	360-degree swivel around the central gas-lift axis
Seat-height adjustment	Pneumatic lever adjustment with 80 mm lift travel and 530 mm maximum seat height
Tilt action	Synchronized or center-tilt mechanism with 15-degree maximum recline and tension control
Tilt lock	Lockable upright position with release through the under-seat lever
Back support	High segmented back with horizontal ribs providing distributed lumbar and thoracic contact
Arm support	Fixed polished loop arms provide 240 mm elbow support above the compressed seat
Mobility	Five 60 mm twin-wheel casters enable rolling and swivel movement on level office floors
Caster mounting	Stem-mounted casters in each aluminum base spoke for tool-based replacement
Rocking resistance	Tension adjustment knob targets user weights up to 150 kg
Color configuration	One visible black upholstery color with polished aluminum frame
Gas-lift stroke	80 mm
Recline Angle / Lock Reference	125° with 3suggested lock positions

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Suitable behind a management desk where a high-back black chair and polished frame support formal meetings
Conference room	Appropriate for boardroom or meeting spaces used for 2 to 4 hour seated sessions
Private workstation	Fits carpeted or hard-floor workstations with 700 mm minimum desk knee clearance
Reception or manager interview setting	Formal black-and-chrome appearance works in reception manager offices or consult rooms
Commercial procurement packages	Suitable for batch purchasing where 36-month warranty and 150 kg capacity are specified as acceptance targets
Users up to 150 kg	Recommended for average and larger-framed office users under the specified load target
Hard or soft floor preparation	Use soft-tread casters for wood or tile and hard-tread casters for carpeted floors
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 office furniture seating dimensions	Use dimensional and safety geometry requirements for office work chairs
EN 1335-2 office furniture seating safety	Apply structural safety, stability, caster, and mechanism requirements
EN 1335-3 office furniture seating test methods	Use standardized static, durability, and impact test methods for factory acceptance
EN 1022 seating stability	Apply domestic and commercial seating stability test procedures

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 office chairs general purpose	Applicable standards and test results require confirmation

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.3 furniture mechanical stability	Apply backward, forward, and lateral stability tests relevant to swivel office chairs

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.3 furniture mechanical stability：Apply backward, forward, and lateral stability tests relevant to swivel office chairs；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EO-HB-RIB-ALU-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EO-HB-RIB-ALU-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EO-HB-RIB-ALU-01打开导出工具

页面快速操作

发布采购询价

产品描述

The High-Back Ribbed Black Executive Swivel Chair combines a formal executive profile with structured comfort and mobility. Its black upholstered seat and tall segmented back use horizontal channel stitching and padded ribs, while the upper lumbar area remains smooth for a clean transition beneath the high-back frame. A polished tubular perimeter frame with slim side contours supports the visual outline, joined by one-piece polished aluminum loop armrests that run continuously from back to seat. Integrated black arm pads follow the curved tubing, and the polished five-star base completes the tailored black-and-metal appearance. Overall dimensions are 610 by 680 by 1170 mm, with 540 mm of clear width between armrests. Construction centers on a rigid load-bearing seat board with molded cut foam, paired with a framed back board using segmented foam or padded rib inserts. The finished seat cushion is 90 mm thick and uses 45 kg/m³ foam; the backrest padding is 70 mm thick with 35 kg/m³ foam. Foam rebound is rated at 40 percent. The black smooth-faced upholstery is 1.2 mm thick and rated for 50,000 Martindale abrasion cycles. Polished aluminum or chrome-finished framing, a black steel tilt mechanism, and a chrome-plated steel gas lift with a 50 mm outer tube provide the structural system. The chair weighs 18 kg net and carries a recommended user weight capacity of 150 kg. Functional features support active office use. The seat rotates 360 degrees around the central gas-lift axis, and pneumatic lever adjustment provides 80 mm of lift travel to a maximum seat height of 530 mm. The synchronized or center-tilt mechanism allows a 15-degree maximum recline with tension control, and an under-seat lever locks the chair in an upright position. The high ribbed back creates a 240 mm lumbar support zone and distributes contact across the lumbar and thoracic regions, while fixed loop arms place elbow support 240 mm above the compressed seat. Five 60 mm nylon or polyurethane twin-wheel casters allow rolling and swiveling on level office floors. The chair is suited to management offices, boardrooms, meeting rooms, private workstations, reception manager offices, and consultation settings. It fits desks with at least 700 mm of knee clearance and works over carpeted or hard-floor work areas. Its formal appearance is appropriate behind an executive desk or in spaces used for meetings lasting two to four hours. Procurement teams can specify the unbranded model EO-HB-RIB-ALU-01 for batch purchases where a 36-month warranty and 150 kg capacity are acceptance targets. Each set is supplied in two cartons, with packaged gross weight of 23 kg and carton volume of 0.26 m³. Reference assembly time is 40 minutes per set, and 135 sets fit a 20GP container at 85 percent space utilization.

High-Back Ribbed Black Executive Swivel Chair with Polished Aluminum Frame Specifications

供应商与现货