纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	680 × 720 × 1180 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	22 kg
Recommended user weight capacity	160 kg
Suitable user stature	185 cm
Seating occupancy	1 person
Gas-lift vertical stroke	100 mm
Tilt angle	15 degrees
Caster rolling durability target	100000 cycles
Base static load target	1136 kg
Seat front edge load target	160 kg
Warranty	5 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Ivory leather-look upholstery over 90 mm padded cushion
Back upholstery	Ivory padded upholstery divided into lumbar and upper-back zones
Outer side shell	Dark molded back and arm-side shell with smooth protective surface
Integrated armrests	Upholstered arm pads continuous with the seat shell
Internal seat support	15 mm molded plywood or composite seat board
Back inner frame	20 mm structural plywood or steel-reinforced composite frame
Seat foam	90 mm high-resilience polyurethane foam, 45 kg/m3 density and 45% rebound
Back foam	80 mm molded polyurethane foam, 35 kg/m3 density and 40% rebound
Upholstery thickness	1.4 mm
Abrasion resistance target	50000 Martindale cycles
Five-star base	Polished aluminum alloy with 2.5 mm structural wall thickness
Gas lift and mechanism	Black powder-coated steel gas lift, 50 mm outer tube and 3 mm steel tilt plate

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel	Full 360-degree rotation around the central gas-lift axis
Height adjustment	Pneumatic seat-height adjustment with 100 mm lift stroke and side activation lever
Synchro tilt	Synchronized seat and back recline with 15-degree maximum back angle
Tilt lock	One-position tilt lock controlled by the under-seat lever
Tension control	Rotary tension knob adjusts recline resistance for users up to 160 kg
Mobile support	Five black twin-wheel casters provide multidirectional movement on hard floors and low-pile carpet
Integrated arm support	Fixed wraparound armrests provide continuous elbow and forearm support at 220 mm above the seat
Ergonomic back zoning	Separate lumbar and upper-back cushion zones support the lower spine and shoulders
Seam construction	Paneled upholstery with 80 mm seam pitch on segmented back sections
Floor clearance	80 mm minimum clearance between base spokes and floor
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Suited to senior management offices where a high-back ivory chair complements dark desks and formal interiors
Private workstation	Supports full-day computer and desk work with swivel, height adjustment, tilt, and caster mobility
Meeting or conference room	Suitable for executive conference seating requiring a consistent upholstered appearance and easy repositioning
Hotel business center	Appropriate in business lounges and guest office suites needing refined seating with durable commercial construction
Professional consultation rooms	Fits legal, financial, and management consultation settings where clients and staff need upright comfort
Recommended desk pairing	Pair with a 720 to 760 mm high executive desk to keep the adjustable seat and armrests aligned
Floor type	Use on hard floors or low-pile carpet with 60 mm twin-wheel casters; specify soft tread for polished wood or stone
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Office chair safety standard	EN 1335:2020 applies to office chair dimensions and safety-related structural geometry
Office chair mechanical durability	EN 1335:2018 applies to strength and durability testing of swivel office chairs
Office chair stability	EN 1022:2018 applies to seated furniture stability verification
Upholstered furniture fire behavior	EN 1021:2019 cigarette ignition and EN 1021:2019 match-flame ignition may be specified for upholstery and foam

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Office chair safety and durability	ANSI/BIFMA X2017applies to general-purpose office chairs, including static load, swivel, tilt, base, and caster tests
Five-star base test	ANSI/BIFMA X2017base-load test applies to the polished five-star base and caster attachment points
Caster and floor-use verification	ANSI/BIFMA X2017caster durability and rolling-load tests apply to the five twin-wheel casters
Upholstered component durability	ANSI/BIFMA e2019furniture sustainability criteria may be used for material, low-emission, and procurement documentation requirements

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Office chair safety applicability	GB/T 3324wooden-furniture general technical requirements may apply only to wood-composite structural components
Upholstered furniture flammability	GB/T 17927.1upholstered furniture burning characteristics may be specified for fabric and foam fire-safety acceptance
Formaldehyde emission	GB 18580formaldehyde emission limits apply if wood-based panels are used in the internal frame
Furniture hardware acceptance	GB/T 3325 metal furniture general technical conditions may support metal base and coating inspection

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Office chair safety applicability：GB/T 3324wooden-furniture general technical requirements may apply only to wood-composite structural components；
2. Upholstered furniture flammability：GB/T 17927.1upholstered furniture burning characteristics may be specified for fabric and foam fire-safety acceptance；
3. Formaldehyde emission：GB 18580formaldehyde emission limits apply if wood-based panels are used in the internal frame；
4. Furniture hardware acceptance：GB/T 3325 metal furniture general technical conditions may support metal base and coating inspection；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXEC-HB-IVORY-5STAR

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXEC-HB-IVORY-5STAR

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXEC-HB-IVORY-5STAR打开导出工具

页面快速操作

发布采购询价

产品描述

The High-Back Padded Executive Swivel Chair is an unbranded executive office chair designed for settings that call for a formal appearance and supportive single-person seating. Presented in ivory with dark molded shell panels, its tall back and padded seat create a refined contrast that complements dark desks, executive furniture, and structured interior schemes. The chair is built around a polished five-star metal base, black twin-wheel casters, and a black synchro-tilt mechanism beneath the seat. Fixed wraparound armrests integrate with the seat shell, while upholstered arm pads provide a continuous surface for elbow and forearm support. Visually, the chair combines a high upholstered back with a smooth dark outer back and arm-side shell. The back padding is divided into lumbar and upper-back zones, giving the chair a tailored executive profile. The ivory leather-look upholstery covers padded seat and back cushions, while the molded shell provides a protective outer surface. The clear width between armrests is 540 mm, and the arm pads sit 220 mm above the seat. The finished seat cushion is 90 mm thick, the backrest padding is 70 mm thick, and the lumbar support zone is 240 mm high. Construction uses a 15 mm molded plywood or composite seat board and a 20 mm structural plywood or steel-reinforced composite inner back frame. Seat cushioning consists of 90 mm high-resilience polyurethane foam at 45 kg/m3 density with 45 percent rebound, while the back uses 80 mm molded polyurethane foam at 35 kg/m3 density with 40 percent rebound. The upholstery thickness is 1.4 mm. The finished chair weighs 22 kg and has a recommended user weight capacity of 160 kg, with suitability listed for a user stature up to 185 cm. Functionality centers on full 360-degree swivel, pneumatic height adjustment, and synchronized seat-and-back recline. The gas lift provides a 100 mm vertical stroke through a side activation lever, and the synchro mechanism allows a 15-degree maximum back angle. An under-seat lever provides one-position tilt lock, while a rotary tension knob adjusts recline resistance. Five black twin-wheel casters support multidirectional movement on hard floors and low-pile carpet, with a caster rolling durability target of 100000 cycles. The model is appropriate for senior management offices, private full-day workstations, executive conference rooms, hotel business centers, business lounges, guest office suites, and legal, financial, or management consultation rooms. For desk coordination, it is recommended with an executive desk height up to 760 mm. Procurement teams should note that one set ships in two cartons, with packaged gross weight of 23 kg, reference carton volume of 0.26 m3, and an indicative loading figure of 135 sets in a 20GP container at 85 percent space utilization. Reference assembly time is 40 minutes per set, making installation planning and desktop height alignment important considerations for commercial projects.

High-Back Padded Executive Swivel Chair Specifications

供应商与现货