纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	640 × 680 × 1040 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	20 kg
Recommended user weight	150 kg
Seat static-load verification target	300 kg
Five-star base static-load target	1136 kg
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound	40%
Upholstery abrasion acceptance	50000 Martindale cycles
Seat-slide adjustment	0 mm fixed seat depth
Recommended daily use	8 hours

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Cognac leather or leather-look upholstery over 90 mm padded cushion
Back upholstery	Cognac upholstered padded back with stitched perimeter
Upholstery thickness	1.2 mm cover material
Seat cushion	Molded polyurethane foam, 90 mm thick at 45 kg/m3 density
Back cushion	Polyurethane foam pad, 70 mm thick at 35 kg/m3 density
Internal seat shell	12 mm molded plywood or engineered composite board
Arm frame	Polished die-cast aluminum continuous loop with upholstered arm pads
Arm pad	Cognac padded pad bonded to the aluminum arm loop
Five-star base	Polished die-cast aluminum five-star base, 700 mm diameter
Gas lift	Chrome-plated steel 50 mm gas-lift cylinder
Tilt mechanism	Black powder-coated steel multi-position tilt mechanism
Casters	Black nylon twin-wheel casters with steel fork and 60 mm wheels

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel	Full 360-degree rotational seat on central gas-lift swivel bearing
Pneumatic height adjustment	Lever-operated gas lift provides 80 mm vertical travel to 530 mm seat height
Back recline	Backrest reclines 15 degrees from upright working position
Tilt lock	Multi-position lock secures the back at 3 selected recline positions
Tilt tension	Rotary tension knob adjusts resistance for user weight up to 150 kg
Fixed arm support	Polished loop arms provide fixed 230 mm forearm support without width or height adjustment
Mobility	Five twin-wheel 60 mm casters enable rolling movement on hard floors and low-pile carpet
Seat-depth adjustment	Fixed 480 mm seat depth with no forward sliding cushion
Synchronized movement	Seat and back move through a synchronized tilt ratio for recline support
Color availability	1 standard cognac color with metal polished finish
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Use behind a 2000 mm executive desk where cognac upholstery and polished metal support a premium appearance
Manager workstation	Suitable for 8-hour daily computer and meeting tasks with 480 mm seat depth and recline support
Boardroom or meeting room	Deploy around conference tables for users requiring mobility, swivel access, and padded arm support
Private consultation room	Fits professional advisory settings where a compact mid-back chair is preferred around a low table
Hard-floor office	Recommended for wood, tile, or sealed concrete floors using soft-tread twin-wheel casters
Single-user assignment	Best assigned to one regular user because fixed seat depth does not adapt across very broad body sizes
Procurement configuration	Pair with an executive desk 750 mm high and 450 mm keyboard clearance for correct seated posture
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 applicability	Use office chair dimensional safety requirements to verify seat, back, clearance, and adjustment geometry
EN 1335-2 applicability	Specify safety test requirements for structural performance under office-chair loading
EN 1335-3 applicability	Use the specified office-chair structural test methods for strength and durability validation
EN 1021-1 applicability	Require cigarette-ignition smouldering upholstery test when fire performance is purchased
EN 1021-2 applicability	Require match-flame ignition test when enhanced upholstery fire acceptance is specified

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.11 applicability	Use general-purpose office chair safety and performance tests for size, load, and durability

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.2 applicability	Applicable standards and test results require confirmation
GB/T 10357.3 applicability	Apply chair and stool strength/durability test method for seat, back, and cyclic loading
GB/T 28202 applicability	Use leather-product terminology when validating genuine leather versus coated material claims

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.2 applicability：Applicable standards and test results require confirmation；
2. GB/T 10357.3 applicability：Apply chair and stool strength/durability test method for seat, back, and cyclic loading；
3. GB/T 28202 applicability：Use leather-product terminology when validating genuine leather versus coated material claims；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXEC-MB-CAM-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXEC-MB-CAM-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXEC-MB-CAM-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Mid-Back Leather Executive Swivel Chair, model EXEC-MB-CAM-01, presents a polished executive-office silhouette through its cognac leather or leather-look upholstery, padded mid-height backrest, continuous polished aluminum loop arms, and matching five-star base. Stitched detailing around the backrest perimeter gives the seating surfaces a tailored appearance, while the reflective metal frame and chrome gas lift create a refined contrast with the warm cognac finish. The chair measures 640 by 680 by 1040 millimetres overall, with a 540-millimetre clear width between fixed armrests and a compact mid-back form suited to professional interiors where visual presence should remain controlled. Construction pairs upholstered comfort with a structured metal and steel support system. The seat uses a 90-millimetre molded polyurethane foam cushion at 45 kg/m3 density over a 12-millimetre molded plywood or engineered composite shell. The backrest uses a 70-millimetre polyurethane foam pad at 35 kg/m3 density. Cover material is 1.2 millimetres thick. Arms are polished die-cast aluminum in a continuous loop, fitted with cognac padded arm pads, while the base is a polished die-cast aluminum five-star form, 700 millimetres in diameter. A black steel tilt mechanism, chrome gas lift, and five twin-wheel nylon casters complete the functional assembly. The seat rotates through 360 degrees and uses lever-operated pneumatic height adjustment with 80 millimetres of travel to a 530-millimetre seat height. The backrest reclines 15 degrees from the upright position, with a multi-position lock that secures it in three selected positions. A rotary tension knob adjusts resistance for users up to the recommended 150-kilogram user weight. The fixed arms offer 230 millimetres of forearm support without width or height adjustment, and the 60-millimetre twin-wheel casters support movement on hard floors and low-pile carpet. This chair is appropriate behind a substantial executive desk, at a manager workstation, around boardroom or conference tables, and in private consultation settings where a compact mid-back chair is preferred. It is especially suited to wood, tile, or sealed concrete floors when using the specified soft-tread casters. Because the seat depth is fixed, single-user assignment is preferable for consistent ergonomic fit. Procurement planning should allow for two cartons per set, a packaged gross weight of 23 kilograms, and a reference assembly time of 40 minutes. The unbranded presentation makes it suitable for projects seeking an executive look without a visible manufacturer label.

Mid-Back Leather Executive Swivel Chair Specifications

供应商与现货