纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	760 × 780 × 850 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	18 kg
Recommended user weight	160 kg
Static seat proof load	320 kg
Backrest horizontal proof load	90 kg
Leg stability load	120 kg
Seating capacity	1 adult
Foam density seat	35 kg/m3
Foam density back	28 kg/m3
Foam rebound rate	42%
Durability cycles	100000 seat-load cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Light warm-gray padded upholstery with leather-like grain
Backrest upholstery	Light warm-gray upholstered face with vertical channel stitching
Outer shell	Dark charcoal upholstered or wrapped rigid shell forming the rear and arm outer faces
Arm pads	Continuous padded armrests upholstered in the same light material
Seat cushion core	Polyurethane foam core over a rigid seat deck
Back cushion core	Polyurethane padding attached to the wraparound back shell
Support frame	Welded or bolted steel inner support frame connected to four metal legs
Leg finish	Matte black powder-coated angular steel legs
Feet	Hard polymer or rubber protective foot caps
Upholstery thickness	1.0 mm
Edge piping	Matched light-color rolled edge treatment along arm and seat borders
Fasteners	Concealed metal bracket and bolt assembly between shell and legs

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating posture	Fixed relaxed lounge posture with a 100-degree back angle
Back support	Integrated non-reclining back with 11 visible vertical channel ribs for lumbar and visual support
Arm support	Continuous wraparound armrests provide 180 mm lateral support above the seat
Entry and exit	Open front with no cross rail at the knee area supports two-sided access
Floor protection	Four non-swivel legs end in small polymer or rubber caps to reduce floor marking
Construction	Fixed upholstered shell on a four-leg metal base with no tilt, swivel, or height adjustment
Cleaning access	Smooth upholstered surfaces and exposed leg gaps enable vacuuming under a 180 mm front clearance
Knockdown design	Leg assembly is specified for bolt-on attachment to reduce carton volume
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office lounge	Suitable beside a desk or in a manager office for short meetings and relaxed waiting
Reception and waiting area	Suitable for hotel lobbies, corporate reception, and club lounges
Residential living room	Suitable as an accent chair near a sofa, window, or fireplace
Bedroom seating	Suitable at a bedside or dressing area for putting on footwear
Consultation room	Suitable for design studios, showrooms, and one-to-one customer discussions
Care environment consideration	Suitable for dry indoor use on level hard floors or low-pile carpet
Recommended grouping	Use two chairs with a 500 to 600 mm side table for a balanced reception setting
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.1 通用办公椅

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · LUX-LC-760-CH

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · LUX-LC-760-CH

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · LUX-LC-760-CH打开导出工具

页面快速操作

发布采购询价

产品描述

The Channel-Tufted Upholstered Lounge Armchair, model LUX-LC-760-CH, is an unbranded modern lounge seat with a composed, tailored appearance. Its light warm-gray seat and back are presented in padded leather-look upholstery, contrasted by a dark charcoal upholstered outer shell that wraps around the rear and arm faces. Eleven visible vertical channel ribs define the backrest, giving the chair a structured rhythm while reinforcing its lounge character. Continuous padded armrests flow from the seat sides into the wraparound form, supported by angular matte black powder-coated steel legs for a clean four-leg base. The chair measures 760 by 780 by 850 millimeters and seats one adult. It has a 540-millimeter clear width between armrests, a 90-millimeter finished seat cushion, and 70-millimeter backrest padding. The seat uses a 35 kilograms per cubic meter polyurethane foam core over a rigid deck, while the back padding is attached to the wraparound shell. A welded or bolted steel inner frame connects to the four metal legs, which terminate in hard polymer or rubber protective caps. The net weight is 18 kilograms, and the recommended user weight is 160 kilograms. Reference proof values include a 320-kilogram static seat load, 90-kilogram horizontal backrest load, and 120-kilogram leg stability load. Functionally, the chair is built for a fixed relaxed posture with a 100-degree back angle. It does not recline, tilt, swivel, or adjust in height. The integrated non-reclining back includes a 240-millimeter lumbar support zone, and the continuous armrests provide 180 millimeters of lateral support above the seat. The open front has no cross rail at the knee area, allowing access from either side. A 180-millimeter front clearance and exposed leg gaps support vacuuming beneath the chair, while smooth upholstered surfaces assist routine care.
\nThe design suits executive office lounges, manager offices, hotel lobbies, corporate reception zones, club lounges, showrooms, design studios, and private consultation spaces. It also works as a residential accent chair beside a sofa, window, fireplace, bed, or dressing area. It is intended for dry indoor use on level hard floors or low-pile carpet. Procurement teams should note that one set ships in two cartons, with a packaged gross weight of 23 kilograms and reference carton dimensions of 850 by 420 by 720 millimeters. Reference assembly time is 40 minutes per set, and carton volume is 0.26 cubic meters. At 85 percent space utilization, an indicative 20-foot general-purpose container accommodates 135 sets.

Channel-Tufted Upholstered Lounge Armchair with Matte Black Metal Legs Specifications

供应商与现货