纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	680 × 700 × 1200 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	150 kg
Net weight	21 kg
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound rating	40%
Seat static-load verification	1020 kg
Base static-load verification	1136 kg
Gas-lift class	Class 4
Caster rolling durability	100000 cycles
Tilt mechanism durability	300000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer upholstery	Tan top-grain leather or matched leather-look surface with stitched edge piping
Quilted back panel	Diamond-quilted tan upholstery over 60 mm padded backing
Seat cushion	Molded high-resilience polyurethane foam, 90 mm thick, wrapped under tan upholstery
Back cushioning	Contoured polyurethane foam, 60 mm thick, bonded to a rigid internal back board
Internal seat shell	12 mm molded plywood or reinforced composite seat board
Internal back board	8 mm molded plywood or reinforced polymer back board
Armrest pads	Tan upholstered pads over 25 mm foam cushioning
Arm supports	Polished die-cast aluminum or plated steel cantilever supports with white-silver finish
Gas lift	Chrome-plated steel telescoping gas lift, 50 mm outer tube, Class 4 performance
Five-star base	Polished die-cast aluminum five-spoke base with 2.5 mm nominal wall section
Tilt mechanism	Black powder-coated steel plate mechanism, 3 mm plate thickness
Casters	Black nylon twin-wheel casters with 60 mm wheels and steel bearing stems

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Swivel function	360-degree continuous seat rotation around the central gas-lift column
Height adjustment	Pneumatic seat-height adjustment through 100 mm travel via the right-side lever
Recline function	Synchronized back recline to 18 degrees rearward from upright position
Tilt lock	Multi-position tilt lock with upright lock and release through the under-seat control
Tilt tension control	Knob-adjusted recline resistance calibrated for users up to 150 kg
Fixed arm support	Fixed padded armrests at 230 mm above the seat, without height or width adjustment
Mobility	Five dual-wheel casters provide rolling movement on carpet or hard floors through a 700 mm base
Back support	High 760 mm back with quilted mid-back zone and solid upper shoulder panel
Front-edge pressure relief	Rounded 60 mm waterfall cushion front reduces pressure behind the knees
Replacement caster fit	11 mm grip-neck caster stem for field replacement with hard-floor or carpet wheels
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Suits director and manager offices where a high-back chair complements wood or leather desk settings
Private workstation	Appropriate for 8 hour desk work at 760 mm high office desks
Meeting and conference room	Can be used at executive conference tables for visitors or senior meeting participants
Home office	Fits premium home offices needing business styling rather than a mesh task-chair appearance
Reception counseling room	Suitable for consultation rooms where upright support and easy rotation are required
Procurement configuration	Order hard-floor casters for wood or tile floors and soft-floor casters for carpeted offices
User profile	Designed for adults up to 150 kg requiring 520 mm seat width and high-back shoulder support
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 office seating dimensions	Use dimensional and safety requirements for office swivel chairs as the dimensional acceptance basis
EN 1335-2 structural safety	Apply strength, durability, and stability test requirements to the finished chair
EN 1335-3 test methods	Applicable standards and test results require confirmation
EN 1021-1 upholstery ignition	Use cigarette-ignition assessment for upholstered seating material combinations

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 office chairs	Apply strength, durability, dimensional, and stability requirements for office seating

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.3 seating strength	Apply the furniture mechanical-property test for chair strength and stability to the complete chair
GB/T 3324 upholstered furniture	Use general technical requirements for upholstered furniture covering workmanship and dimensions
GB 17927 furniture upholstery safety	Use the upholstered furniture safety and fire-behavior requirements specified for the order market
GB/T 24430 office furniture	Use the office-furniture general requirements and test methods for structural quality

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.3 seating strength：Apply the furniture mechanical-property test for chair strength and stability to the complete chair；
2. GB/T 3324 upholstered furniture：Use general technical requirements for upholstered furniture covering workmanship and dimensions；
3. GB 17927 furniture upholstery safety：Use the upholstered furniture safety and fire-behavior requirements specified for the order market；
4. GB/T 24430 office furniture：Use the office-furniture general requirements and test methods for structural quality；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXE-HB-QT-680-CAM

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXE-HB-QT-680-CAM

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXE-HB-QT-680-CAM打开导出工具

页面快速操作

发布采购询价

产品描述

The High-Back Quilted Tan Leather Executive Office Chair combines a traditional executive silhouette with polished metal detailing. Its tall backrest is shaped for upper-body support and finished in tan upholstery with a diamond-quilted central panel and stitched edge piping. The padded seat, matching armrest pads, and contoured back create a coordinated appearance suited to wood desks, leather furnishings, and refined business interiors. A five-star base, cantilevered arm supports, and central chrome-finished gas lift give the chair a structured, premium visual presence. Construction uses tan top-grain leather or a matched leather-look surface over molded and contoured polyurethane foam. The seat cushion is 90 mm thick and supported by an internal molded plywood or reinforced composite board, while the back cushioning is bonded to a rigid internal board. Armrest pads include 25 mm foam cushioning, and the arm supports use polished die-cast aluminum or plated steel in a white-silver finish. The mechanism is black steel, the telescoping gas lift has a chrome-plated steel outer tube, and the base carries nylon twin-wheel casters. Functional features support desk-based work and meeting use. The seat rotates 360 degrees, adjusts pneumatically through 100 mm of travel with a right-side lever, and reclines 18 degrees rearward from the upright position. An under-seat control provides multi-position tilt lock and release, while a knob adjusts recline resistance. Fixed padded armrests remain at 230 mm above the seat, and the five dual-wheel casters enable movement across carpet or hard floors. The chair is rated for users up to 150 kg, with a 540 mm clear width between armrests and a 240 mm lumbar support zone. This model is appropriate for director and manager offices, private workstations, executive conference rooms, premium home offices, and consultation or reception settings where upright support and easy rotation are beneficial. It is especially suitable where a high-back business look is preferred over a mesh task-chair aesthetic. Buyers should specify caster type by floor surface: hard-floor casters for wood or tile and soft-floor casters for carpet. Each set ships in two cartons and has a reference assembly time of 40 minutes. The fixed arm design, tan upholstery, polished finish, and executive form should be reviewed against desk height, interior décor, and maintenance expectations before purchase.

High-Back Quilted Tan Leather Executive Office Chair Specifications

供应商与现货