纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	670 × 700 × 1180 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	18 kg
Recommended user weight	150 kg
Static backrest load reference	160 kg
Five-star base static load reference	1,136 kg
Gas-lift cycles reference	120,000 cycles
Caster rolling durability reference	100,000 cycles
Tilt mechanism cycles reference	100,000 cycles
Recommended daily occupancy	8 hours
Color count	3 finishes
Warranty reference	5 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer upholstery	Beige upholstery with matching chevron seams and black perimeter piping
Upholstery thickness	1.2 mm
Upholstery abrasion target	50,000 Martindale cycles
Seat cushion	80 mm molded polyurethane foam pad under beige upholstery
Seat foam density	45 kg/m3
Seat foam rebound	40%
Back padding	60 mm polyurethane foam layer bonded to contoured inner shell
Internal seat shell	12 mm molded plywood or reinforced polymer load plate
Back support frame	20 mm steel or molded composite inner support frame
Gas lift	50 mm diameter chrome-plated steel class-4 gas lift
Five-star base	Polished die-cast aluminum five-star base with five tubular spokes
Base wall thickness	3.0 mm aluminum spoke wall section

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel	Full 360-degree rotational seating around the central gas-lift bearing
Seat height adjustment	100 mm pneumatic height travel through a right-side control lever
Back tilt action	Synchronized seat-and-back recline with 18-degree maximum tilt angle
Tilt lock	One-position upright lock and one free-tilt mode selected by the side lever
Tilt tension control	Rotary tension knob under the seat adjusts resistance for user weights up to 150 kg
Integrated body wrap	Tall wraparound side panels provide lateral shoulder and torso containment without separate armrests
Chevron seam back zones	Two horizontal chevron seam lines divide the back into upper, middle, and lower support zones
Mobility system	Five twin-wheel casters support rolling on hard floors and low-pile carpet
Upholstered edge protection	Black piping trims the outer shell edge and protects the upholstery boundary
Seating orientation	Forward-facing task posture with fixed integrated side support and no visible removable arm pads
Floor protection	60 mm soft-tread twin wheels with 25 mm wheel width reduce point loading
Recline Angle / Lock Reference	125° with 3suggested lock positions

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Inner packaging	Polybag, molded foam corner protection, and five-layer corrugated carton
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Use behind a 1,600 to 2,200 mm executive desk where the high back and beige finish support a formal room appearance
Private manager workspace	Suitable for managers requiring 8-hour task support, swivel access, and recline during phone or computer work
Conference or boardroom setting	Place around 1,200 to 1,600 mm wide meeting positions for visually coordinated executive seating
Home office	Use in a dedicated home office with hard flooring or low-pile carpet and a desk height of 720 to 760 mm
Consultation room	Suitable for professional advisory suites where a polished base and neutral beige upholstery match refined interiors
Reception executive nook	Use at a compact signing or meeting surface rather than high-traffic shared benching
Floor condition recommendation	Use soft-tread casters on wood, tile, polished stone, or low-pile carpet to reduce noise and floor marking
Seating capacity	Designed for one adult user per chair with 150 kg maximum specified user weight

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 applicability	Use for office chair dimensions, including seat height, depth, and adjustment ranges
EN 1335-2 applicability	Use for safety, strength, and durability requirements of office work chairs
EN 1335-3 applicability	Use for test methods verifying safety, stability, and durability performance
EN 1021-1 applicability	Use for cigarette-ignition upholstery resistance if seating fabric is specified

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 applicability	Use for office chair safety, static load, impact, fatigue, and stability testing
BIFma X5.1 back durability test	Use 120,000 cycles as a high-use durability acceptance target when the supplier offers BIFMA testing

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.3 applicability	Use for furniture strength and durability testing of chair seats and backs
GB/T 27927 applicability	Use for tilt and stability evaluation of swivel office seating
GB/T 19001 applicability	Use for supplier quality-management system documentation during procurement
GB 1840 applicability	Use for formaldehyde-emission limits if wood-based panels are included in the seat shell

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.3 applicability：Use for furniture strength and durability testing of chair seats and backs；
2. GB/T 27927 applicability：Use for tilt and stability evaluation of swivel office seating；
3. GB/T 19001 applicability：Use for supplier quality-management system documentation during procurement；
4. GB 1840 applicability：Use for formaldehyde-emission limits if wood-based panels are included in the seat shell；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXEC-HB-BGE-700

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXEC-HB-BGE-700

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXEC-HB-BGE-700打开导出工具

页面快速操作

发布采购询价

产品描述

The High-Back Beige Upholstered Executive Swivel Chair, model EXEC-HB-BGE-700, presents a formal executive profile through a tall wraparound back, padded seat, neutral beige upholstery, matching chevron seams, and black perimeter piping. Two horizontal chevron seam lines divide the back into upper, middle, and lower support zones, while the integrated side panels wrap around the shoulders and torso. This shell-based design does not use separate armrests, leaving a clear width of 540 mm between the armrest areas. Overall dimensions are 670 x 700 x 1180 mm. The chair is supported by a polished aluminum five-star base, black twin-wheel casters, a steel gas-lift column, and a steel tilt mechanism. The beige outer upholstery is 1.2 mm thick, with an abrasion target of 50,000 Martindale cycles. A 90 mm finished seat cushion uses an 80 mm molded polyurethane foam pad with 45 kg/m3 foam density and 40 percent rebound. The 70 mm backrest padding consists of a 60 mm polyurethane foam layer bonded to a contoured inner shell. Internal support is provided by a 12 mm molded plywood or reinforced polymer seat load plate and a 20 mm steel or molded composite back frame. The lumbar support zone is 240 mm high. Functionally, the chair rotates 360 degrees around the central gas-lift bearing. A right-side lever controls 100 mm of pneumatic seat-height travel. The synchronized seat-and-back recline offers an 18-degree maximum tilt angle, with one upright lock position and one free-tilt mode. A rotary knob beneath the seat adjusts tilt resistance for users up to 150 kg. Reference values include a net weight of 18 kg, a static backrest load of 160 kg, a five-star base static load of 1,136 kg, 120,000 gas-lift cycles, and 100,000 cycles for caster rolling and tilt mechanism durability. The chair suits executive offices behind a 2,200 mm maximum-width executive desk, private manager workspaces requiring task support and recline, boardrooms around 1,600 mm maximum-width meeting positions, refined consultation rooms, and executive reception nooks. It is also appropriate for a dedicated home office with hard flooring or low-pile carpet and a 760 mm maximum desk height. Procurement planning should account for unbranded supply, one set packed in two cartons, a packaged gross weight of 23 kg, 0.26 cubic meter carton volume, 850 x 420 x 720 mm carton dimensions, and 40 minutes reference assembly time. Packaging includes a polybag, molded foam corner protection, and a five-layer corrugated carton.

High-Back Beige Upholstered Executive Swivel Chair Specifications

供应商与现货