纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	660 × 680 × 1010 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	150 kg
Net weight	18 kg
Static base load rating	500 kg
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound rating	40%
Fabric or leather abrasion resistance	50000 Martindale cycles
Seat impact durability	100000 cycles
Caster rolling durability	100000 cycles
Suggested warranty	5 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Taupe leather-look upholstery over padded cushion; exact hide or fabric grade requires supplier BOM confirmation
Backrest upholstery	Soft taupe face material with vertical cushioning; visible smooth texture, material grade not proven
Outer shell	Dark molded back and seat cradle forming the visible wraparound perimeter and arm support
Arm pads	Taupe upholstered padding integrated with the dark side shell for continuous forearm support
Seat cushion	80 mm polyurethane foam core with density target 45 kg/m3; internal cut requires BOM confirmation
Back cushion	90 mm shaped polyurethane padding with density target 35 kg/m3; inferred from the padded profile
Back inner frame	3 mm steel reinforcement embedded in the molded back shell; concealed support inferred by category
Five-star base	Polished die-cast aluminum five-spoke base with visible bright metallic finish
Gas lift	50 mm chrome-plated steel telescoping gas column with black top and bottom connectors
Control mechanism	Black steel tilt plate with visible side lever and tension control beneath the seat
Casters	Black nylon twin-wheel casters with metal mounting stems, one wheel assembly at each base tip
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Swivel function	360-degree continuous swivel around the central gas-lift bearing for desk-side movement
Seat height adjustment	100 mm gas-lift travel controlled by the visible right-side lever for sit-stand desk alignment
Backrest tilt	Synchronized seat-and-back tilt with 15-degree rearward recline and lockable upright position
Tilt tension control	Manual rotary tension knob under the mechanism, sized for user-weight adjustment between light and firm resistance
Tilt lock positions	3-position lock covering upright, mid-recline, and free-tilt modes for task or relaxed use
Mobility system	Five polished aluminum spokes carry five 60 mm twin-wheel casters for low-effort rolling on hard floors
Integrated arm support	Fixed wraparound armrests provide 220 mm forearm support above the seat without width adjustment
Lumbar zone	Contoured mid-back panel concentrates support around the lumbar and lower-thoracic region
Rocker-style use	Free-float tilt allows controlled movement during meetings while the five-star base retains floor contact
Color program	1 visible taupe-and-dark-shell colorway, suitable for coordinating with wood or metal executive desks
Reclined overall depth	760 mm
Recline Angle / Lock Reference	125° with 3suggested lock positions

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Use behind a 1600 to 2000 mm executive desk where taupe upholstery and polished metal suit formal interiors
Manager workstation	Suitable for daily computer and meeting tasks with height adjustment, recline, and mobile five-star base
Private meeting room	Provides a refined guest or manager seat around conference tables without requiring additional armchair furniture
Home office	Fits professional residential workspaces needing executive comfort and a compact 660 mm footprint
Project specification	Appropriate for corporate refurbishment projects requiring one chair SKU with swivel, tilt, and casters
Hard-floor workspace	Twin 60 mm casters support movement on wood, tile, vinyl, and low-pail carpet-protected office floors
User profile	Designed for users up to 150 kg requiring integrated arm support and 480 mm seat height at maximum setting
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 office seating dimensions applicability	Use for dimensional and ergonomic compatibility checks for European office procurement
EN 1335-2 safety and structural requirements	Use as the acceptance basis for chair stability, strength, and safety verification
EN 1335-3 test methods applicability	Use laboratory test methods to validate static load, fatigue, and impact performance
EN 1021-1 upholstery ignition applicability	Use cigarette-ignition testing if flame-retardant seating is specified for the project

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 office chairs applicability	Use for North American commercial seating strength, stability, durability, and dimensional acceptance

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357 furniture mechanical test applicability	Use relevant seating strength and stability test methods for pre-shipment laboratory verification
GB 18584 indoor furniture environmental applicability	Use for furniture hazardous-substance limits when the upholstered chair is supplied to Chinese projects
GB/T 3324-2017 wooden furniture general applicability	Use only for any wooden internal components, finish, inspection, and labeling requirements

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357 furniture mechanical test applicability：Use relevant seating strength and stability test methods for pre-shipment laboratory verification；
2. GB 18584 indoor furniture environmental applicability：Use for furniture hazardous-substance limits when the upholstered chair is supplied to Chinese projects；
3. GB/T 3324-2017 wooden furniture general applicability：Use only for any wooden internal components, finish, inspection, and labeling requirements；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OFC-MB-TAUPE-5STAR

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OFC-MB-TAUPE-5STAR

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OFC-MB-TAUPE-5STAR打开导出工具

页面快速操作

发布采购询价

产品描述

The Taupe Upholstered Executive Swivel Chair presents a tailored executive-office form with soft taupe upholstery set against a dark molded outer shell. Its wraparound back and seat cradle create a continuous visual frame, while integrated arm pads extend from the side structure for streamlined forearm support. A polished die-cast aluminum five-spoke base adds a bright metallic contrast beneath the neutral seating body. The chair measures 660 by 680 by 1010 mm, with a 540 mm clear width between armrests, a 90 mm finished seat cushion, 70 mm backrest padding, and a 240 mm lumbar support zone. Construction combines padded polyurethane cushions, a dark molded shell, a 50 mm chrome-plated steel gas lift, a steel mechanism, and black 60 mm twin-wheel casters. The seat uses an 80 mm foam core with a 45 kg per cubic meter density target, while the shaped back padding targets 35 kg per cubic meter. The upholstery has a leather-look appearance and 50,000 Martindale abrasion resistance, though exact hide or fabric grade should be confirmed through the supplier bill of materials. A 3 mm steel reinforcement is embedded within the molded back shell. Functional features support sustained desk work and relaxed meeting use. The chair provides 360-degree continuous swivel, 100 mm of gas-lift seat-height travel through a right-side lever, and synchronized seat-and-back tilt with a 15-degree rearward recline. Users can select three lock modes: upright, mid-recline, and free-tilt, while the underside rotary knob adjusts tilt resistance from light to firm. The fixed armrests provide 220 mm of forearm support above the seat, and the five-star base carries twin-wheel casters for low-effort movement on hard floors. The chair is suitable behind a 2000 mm executive desk, at manager workstations, in private meeting rooms, and in professional home offices. It also suits corporate refurbishment standards requiring one consistent mobile executive chair across multiple spaces. The recommended user weight capacity is 150 kg, the static base load rating is 500 kg, and net weight is 18 kg. Procurement teams should note the unbranded model OFC-MB-TAUPE-5STAR, the need to confirm material and internal construction details before specification, and the packing arrangement of one set in two cartons. Reference assembly time is 40 minutes per set, packaged gross weight is 23 kg, carton volume is 0.26 cubic meter, and a 20GP container can accommodate 135 sets at 85 percent space utilization.

Taupe Upholstered Executive Swivel Chair Specifications

供应商与现货