纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	700 × 720 × 1200 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	20 kg
Packaged gross weight	24 kg
Recommended user weight capacity	160 kg
Suitable user stature range	1850 mm tall
Seat height adjustment travel	100 mm
Back tilt angle	118 degrees
Swivel rotation	360 degrees
Caster rolling durability target	100000 cycles
Gas-lift cyclic durability target	100000 cycles
Base static-load verification target	1135 kg

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer upholstery	Tan leather-look surface with stitched horizontal back seam; material grade requires supplier BOM confirmation
Seat cushion	Molded polyurethane foam, 90 mm thick at front edge, target density 45 kg/m3
Back padding	Polyurethane foam or fiber pad over rigid inner shell, target density 35 kg/m3
Inner seat board	12 mm molded plywood or equivalent structural composite seat carrier
Back inner shell	8 mm molded composite board with perimeter steel reinforcement
Integrated armrests	Upholstered curved arms formed with the outer shell and internal rigid support
Gas lift	50 mm polished steel telescopic gas lift, class 4 procurement grade
Five-star base	Polished die-cast aluminum or chrome-plated steel five-spoke base, 2.5 mm wall section
Tilt mechanism	Black steel multi-position tilt plate with lever and tension adjustment, 3 mm plate target
Casters	Black nylon twin-wheel casters with steel axle and hard-floor tread, 60 mm diameter
Stitching	Tan matching thread with 7 stitches per 50 mm target seam pitch
Hardware finish	Bright polished metal finish on base and lift with black painted steel control parts

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Pneumatic height adjustment	Side lever raises or lowers the seat through 100 mm of gas-lift travel
360-degree swivel	The seat rotates fully around the gas lift for workstation access
Back tilt with tension control	Tilt plate allows controlled recline to 118 degrees and adjustable resistance via rear knob
Tilt lock position	One upright lock position for stable task work, with free-tilt mode released by lever
Fixed integrated arm support	Curved arms provide continuous forearm support at 220 mm above the seat and do not adjust
High-back upper-body support	Tall contoured back supports lumbar and shoulder zones for prolonged executive seating
Mobile caster base	Five twin-wheel casters enable rolling on hard floors or low-pile carpet
Weight-activated seating stability	Five-star 700 mm base centers the user load and resists tipping during normal swivel and tilt
Single-user office seating	Padded seat and back are designed for one person in sustained desk or conference use
Swivel clearance radius	400 mm
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Packaged gross weight	24 kg
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Use behind a management desk where the high back and tan finish communicate a professional private-office setting
Managerial workstation	Suitable for 4 to 8 hours of desk work with swivel access, height adjustment and mobile support
Conference room	Suitable around formal meeting tables for visitors or executives when fixed-arm aesthetics are preferred
Private consulting room	Fits professional advisory or reception meetings requiring a comfortable chair that can turn toward guests
Home office	Suitable for a refined home workstation paired with a 1400 to 1800 mm executive desk
Floor surface recommendation	Use hard-floor or low-pile-carpet casters on level indoor surfaces; add soft tread if flooring is easily scratched
Recommended table height	Pair with a 750 mm standard office desk to coordinate with the 500 mm maximum seat height
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 applicability	Use for office chair dimensions, safety clearance and ergonomic geometry verification
EN 1335-2 applicability	Use for safety requirements including stability, structural strength and casters
EN 1335-3 applicability	Use for test methods covering static load, fatigue and impact performance
EN 1021-1 applicability	Use for ignition resistance assessment with smouldering cigarette if fabric or foam fire performance is specified
EN 1021-2 applicability	Use for match-flame ignition assessment if the project specifies upholstery flammability testing

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 office chair applicability	Use the latest X5.1 tests for back strength, seat load, stability, swivel, tilt and durability
ANSI/BIFMA X5.15 applicability	Use for upholstered furniture textile surface performance if leather or faux-leather abrasion data is required

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.2 applicability	Use for furniture mechanical surface coating physical-property tests such as resistance to liquids and wear
GB/T 10357.3 applicability	Use for chair strength and durability test methods including back, seat and leg loading
GB/T 28004.1 applicability	Use for office-chair dimensional and structural performance verification

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.2 applicability：Use for furniture mechanical surface coating physical-property tests such as resistance to liquids and wear；
2. GB/T 10357.3 applicability：Use for chair strength and durability test methods including back, seat and leg loading；
3. GB/T 28004.1 applicability：Use for office-chair dimensional and structural performance verification；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · HB-EXEC-TAN-5STAR

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · HB-EXEC-TAN-5STAR

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · HB-EXEC-TAN-5STAR打开导出工具

页面快速操作

发布采购询价

产品描述

The High-Back Leather Swivel Executive Chair presents a formal executive profile with tan leather-look upholstery, a tall contoured back, integrated curved arms, and a polished five-spoke metal base. Its visual character is defined by a padded seat, high back with a stitched horizontal seam, black tilt hardware, and black twin-wheel casters that balance a refined office appearance with mobile functionality. The fixed arms are formed with the outer shell and include internal rigid support, creating a continuous silhouette and clear forearm support without separate adjustment mechanisms. Construction combines padded comfort with a structured internal frame. The seat uses molded polyurethane foam at 90 mm thick at the front edge over a molded plywood or equivalent structural composite seat carrier. The back uses polyurethane foam or fiber padding over a rigid molded composite inner shell with perimeter steel reinforcement. The five-star base is offered in polished die-cast aluminum or chrome-plated steel, paired with a polished steel telescopic gas lift and a black steel multi-position tilt plate. Exact material grade should be confirmed against the supplier bill of materials before purchase. The chair is designed for practical daily office movement. A side lever controls pneumatic seat-height adjustment through 100 mm of travel, while the seat provides 360-degree swivel for access across a workstation. The tilt mechanism supports recline to 118 degrees, tension adjustment through a rear knob, a free-tilt mode, and one locked upright position for task-focused work. The high back includes a defined lumbar support zone and shoulder-area support, while the fixed arms sit 220 mm above the seat. The stated weight capacity is 160 kg, and the chair is suited to users up to 1850 mm tall. This model fits executive private offices, managerial workstations, formal conference rooms, consulting spaces, and refined home offices. It works especially well behind a management or executive desk, around meeting tables where a fixed-arm aesthetic is preferred, or in rooms where the occupant may turn between a desk and visitors. The casters are intended for level indoor hard floors or low-pile carpet; soft-tread casters should be considered for easily scratched flooring. Procurement planning should account for delivery as one set across two cartons, with a net chair weight of 20 kg and packaged weight listed as 24 kg in the main product data, while the logistics reference lists 23 kg per set. Reference assembly time is 40 minutes. Buyers should confirm upholstery grade, base material, foam specifications, caster tread type, and final packed-weight documentation with the supplier to ensure the order matches the intended flooring, seating use, and commercial or residential project requirements.

High-Back Leather Swivel Executive Chair Specifications

供应商与现货