纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	590 × 620 × 1010 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	18 kg
Maximum user weight	140 kg
Back tilt static load	180 kg
Seat impact durability	100,000 cycles
Caster rolling durability	100,000 cycles
Gas-lift compression durability	100,000 cycles
Recommended daily occupancy	1 person
Color options	1 visible color
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Black leather-look upholstered surface over foam; exact leather grade or PU composition requires supplier BOM confirmation.
Back upholstery	Black padded upholstery divided into three horizontal support pads; visible outer material class only.
Seat cushion foam	80 mm molded polyurethane foam, suggested density 45 kg/m3 for executive seating; density requires supplier validation.
Back cushion foam	60 mm polyurethane padding with segmented support, suggested density 35 kg/m3 for back comfort and shape retention.
Internal seat shell	12 mm plywood or engineered composite seat board with steel support plate; hidden structure based on category construction.
Back support frame	20 x 2.0 mm rectangular steel back cradle behind the padded panels; inferred from the rigid upholstered sections.
Arm frame	25 x 2.0 mm chrome-plated tubular steel continuous arm loop connecting back and seat structure.
Lift column	50 mm chrome-plated steel gas lift with black telescopic sleeve; grade and supplier marking are not visible.
Tilt mechanism	3 mm welded steel synchro-tilt plate with black painted finish and side tension control.
Five-star base	Polished chrome-plated steel or aluminum five-spider base, 2.0 mm wall-equivalent structural section; alloy needs BOM confirmation.
Casters	60 mm twin-wheel black nylon casters with steel swivel stems and hard-floor contact treads.
Surface finish	Mirror polished chrome on exposed tubular frame and base, with black powder-coated mechanism components.

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seat height adjustment	80 mm gas-lift travel from 450 to 530 mm using the visible under-seat lever.
Back tilt movement	Synchro-style recline through 15 degrees with front seat synchronized to back movement.
Tilt lock	1 upright lock position controlled by the under-seat lever for fixed task posture.
Tilt tension control	Side rotary tension knob adjusts resistance for users up to the 140 kg target.
Fixed arm support	Cantilevered tubular armrests provide 230 mm forearm support height without pad-height adjustment.
Mobility	Five dual-wheel casters provide omnidirectional movement on a 700 mm diameter base.
Stability geometry	Five-star load distribution and 620 mm depth resist rearward tipping during the 15-degree recline.
Back support zones	Three segmented padded zones distribute support across lumbar, mid-back, and shoulder areas.
Caster mounting	Five stem-mounted casters allow field replacement without disassembling the base.
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Suitable for managers and directors needing a high-back chair with formal black and chrome appearance.
Private workstation	Fits desks with at least 700 mm knee-depth and 600 mm chair clearance for swivel and recline use.
Meeting and conference room	Appropriate for long discussions where mobile seating and padded back support are required.
Reception or management meeting area	Formal black upholstery and polished metal frame coordinate with professional visitor seating.
Hard-floor and carpet interiors	Twin-wheel casters support movement across tile, wood, vinyl, and low-pile carpeted floors.
Single-user daily office use	Recommended for one occupant at a time with a 140 kg maximum user-weight target.
Procurement configuration	Pair with an executive desk 1600 mm or wider to accommodate the 700 mm mobile base footprint.
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 dimensions	Defines dimensional safety and ergonomic test geometry for office task seating.
EN 1335-2 safety requirements	Applies to structural safety, stability, caster strength, and mechanism integrity.
EN 1335-3 test methods	Defines static, fatigue, impact, and durability test procedures for the chair.
EN 1022 domestic seating stability	Provides applicable overturning assessment for upright and reclined seating positions.

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 office chairs	Applies to back, seat, base, arm, tilt, and caster strength and durability acceptance testing.

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.3 furniture strength and durability	Applies to seat and back static-load, impact, and fatigue acceptance testing for metal office seating.
GB/T 3324 general technical specification	Applies to dimensional tolerances, finish quality, and structural inspection of metal and upholstered furniture.
GB/T 27924 laboratory furniture safety	Provides relevant stability and safety reference for swivel office chairs used indoors.

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.3 furniture strength and durability：Applies to seat and back static-load, impact, and fatigue acceptance testing for metal office seating.；
2. GB/T 3324 general technical specification：Applies to dimensional tolerances, finish quality, and structural inspection of metal and upholstered furniture.；
3. GB/T 27924 laboratory furniture safety：Provides relevant stability and safety reference for swivel office chairs used indoors.；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EO-CHB-CR-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EO-CHB-CR-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EO-CHB-CR-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Black Padded High-Back Executive Swivel Chair with Chrome Frame presents a formal executive profile, pairing a tall black upholstered back with a polished chrome-plated tubular frame and five-star base. Its back is organized into three horizontal padded support sections, while the continuous chrome arm loops create a clean visual line from the seat toward the backrest. The black upholstery and bright metal finish give the chair a structured management-office appearance suited to both traditional and contemporary professional interiors. Comfort is built around a padded seat and high back with foam cushioning. The finished seat cushion is 90 mm thick and the backrest padding is 70 mm thick, with a defined lumbar support zone and a clear 540 mm width between the armrests. The seating surface uses a black leather-look upholstered material over foam; the exact leather grade or polyurethane composition should be confirmed on the supplier bill of materials. Hidden support includes a seat board with steel support plate, a rectangular steel back cradle, and a welded steel synchro-tilt mechanism. The 50 mm chrome-plated steel gas lift includes a black telescopic sleeve, and the base carries twin-wheel nylon casters. Functional features support daily desk work and meeting use. An under-seat lever controls 80 mm of seat-height travel, from 450 to 530 mm, and the synchro-style mechanism allows 15 degrees of recline with coordinated front-seat movement. The same lever provides one upright lock position, while a side rotary knob adjusts tilt resistance. Fixed cantilever armrests offer forearm support without pad-height adjustment, and the five dual-wheel casters enable omnidirectional movement across tile, wood, vinyl, and low-pile carpet. The chair is rated for a maximum user weight of 140 kg and is intended for one occupant at a time. This model is appropriate for executive offices, private workstations, conference rooms, and reception or management meeting areas where a polished black-and-chrome look is desired. Workstations should provide adequate knee depth and clearance for swivel and recline movement. Procurement teams should note the unbranded EO-CHB-CR-01 designation, the need to validate foam density and component markings with the supplier, and the reference packaging arrangement of one set in two cartons. The listed assembly time is 40 minutes per set, with packaged gross weight of 23 kg, making delivery, receiving space, assembly labor, floor type, and replacement caster availability useful planning points.

Black Padded High-Back Executive Swivel Chair with Chrome Frame Specifications

供应商与现货