商品供应商New Chinese Style Walnut Brown Slatted Entryway Console Cabinet，Solid kiln-dried hardwood, walnut brown matte lacquer finish
可联系供应商获取生产周期与报价。
PRODUCT MODULE 01 / 06
基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源：工厂资料结构化字段，最终以实测值为准
| 产品外部尺寸（宽 × 深 × 高） | 1600 × 350 × 800 mm | |
|---|---|---|
| Back gallery rail height | 90 mm | |
| Single slatted door size | 400 x 450 mm | |
| Central open compartment size | 600 x 450 mm | |
| Central shelf clearance per tier | 220 mm | |
| Lower open slatted shelf height from floor | 200 mm | |
| Support leg section size | 40 x 40 mm | |
| Lower slatted shelf depth | 300 mm | |
| Brass teardrop pull length | 80 mm | |
| Vertical slat width on doors | 18 mm | |
| Slat gap width on doors | 18 mm | |
| Lower shelf solid end platform size | 150 x 300 mm | |
| Carcass panel thickness | 20 mm | |
| Back panel thickness for open shelves | 9 mm | |
| Edge band thickness | 2 mm | |
| Back Panel Thickness | 9 mm |
PRODUCT MODULE 02 / 06
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源：产品性能数据，采购前请核对具体测试口径
| Total unit static load capacity | 100 kg | |
|---|---|---|
| Door hinge cycle rating | 50000 cycles | |
| Unit net weight | 90 kg | |
| Recommended maximum weight for top surface | 60 kg | |
| Anti-tip connector required quantity | 2 | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
PRODUCT MODULE 03 / 06
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源：以工厂材质清单与验货报告为准
| Main structural frame | Solid kiln-dried hardwood, walnut brown matte lacquer finish | |
|---|---|---|
| Cabinet door slats | Solid wood vertical slats, same walnut finish as frame | |
| Open compartment back panel | 9mm dark brown MDF backing, matte finish | |
| Hardware pulls | Cast brass teardrop-shaped handles, brushed brass finish | |
| Door hinges | Cold-rolled steel concealed soft-close hinges, zinc-plated | |
| Lower slatted shelf | Solid wood slats with shaped stepped end caps, walnut finish | |
| Back gallery rail | Solid wood frame with central vertical slats, shaped cutout corners | |
| Support legs | Solid wood squared straight legs, floor-protecting felt pads | |
| Shelf surfaces | Solid wood flat panels, sanded smooth with matching lacquer finish | |
| Finish coating | Low-VOC matte nitrocellulose lacquer, scratch-resistant top coat | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints |
PRODUCT MODULE 04 / 06
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源：功能配置参数，以供应商正式规格为准
| Side cabinet storage | Two slatted doors conceal single-compartment enclosed storage on left and right | |
|---|---|---|
| Central open display | Two-tier fixed open shelf for frequently accessed entry items or decor | |
| Lower open storage | Full-width slatted open shelf designed for shoe storage and daily entry items | |
| Gallery rail guard | Raised back top rail prevents items from sliding off rear of top surface | |
| Door operation | Hinged doors open 110 degrees outward for full access to enclosed storage | |
| Ventilation design | Slatted door and shelf construction allows air circulation for stored footwear | |
| Floor protection | Felt pads on leg bottoms prevent scratches to hard flooring surfaces | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
PRODUCT MODULE 05 / 06
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源：外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
PRODUCT MODULE 06 / 06
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源：依据产品结构与品类整理的推荐应用场景
| Residential entryway | Suitable for placement against entry walls for shoe, key and decor storage | |
|---|---|---|
| Living room partition | Functions as a low open partition between living room and entry space | |
| Dining room sideboard | Usable as a dining storage cabinet for tableware and serving items | |
| Reception waiting area | Suitable for commercial reception spaces for visitor item storage | |
| Tea room storage | Ideal for traditional tea rooms to store tea ware and display decor | |
| Hallway accent piece | Works as a decorative narrow hallway cabinet for small display items | |
| Matching configuration | Pairs with solid wood entry benches, shoe racks and hanging racks in the same finish |
STANDARD S1
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 14749:2016 | Domestic and kitchen storage units and worktops - safety requirements | |
|---|---|---|
| EN 71-3:2019 | Safety of toys - migration of certain elements, applicable to hardware finish safety | |
| EN 13722:2004 | Furniture - test methods for strength and durability of storage units |
STANDARD S3
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to structural and finish quality | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances for wood furniture | |
| GB/T 4893.8-2013 | Test for surface wear resistance of furniture coatings |
招标文件标准化描述文本
本产品须满足以下技术参数要求： 1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to structural and finish quality； 2. GB 18584-2001：Indoor decorating and refurbishing materials - limit of harmful substances for wood furniture； 3. GB/T 4893.8-2013：Test for surface wear resistance of furniture coatings； 最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告，可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块，文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具