纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	640 × 610 × 1140 mm
Seat width	500 mm
Seat depth	440 mm
Seat height from floor	455 mm
Backrest total height	705 mm
Backrest outer width	415 mm
Armrest height above seat	210 mm
Armrest top height from floor	655 mm
Frame tube wall thickness	1.5 mm
Floor glide diameter	30 mm
Knee clearance under seat	200 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net product weight	18 kg
Maximum static load capacity	180 kg
Recommended user weight	120 kg
Seat foam density	45 kg/m³
Seat cushion thickness	80 mm
Backrest foam thickness	60 mm
Upholstery abrasion resistance	50000 Martindale cycles
Seam stitch pitch	8 stitches per inch
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Cantilever base frame	1.5mm thick chrome-plated cold-rolled steel
Seat upholstery	Black abrasion-resistant PU faux leather
Seat core padding	High-density high-resilience polyurethane foam
Backrest panel	Contoured padded upholstery over plywood inner support
Armrest structure	Fixed steel support with soft padded PU top
Floor contact glides	Non-marking TPE rubber glides
Back inner support board	12mm thick multi-layer plywood
Surface stitching	High-strength polyester bonded thread
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating positioning	Fixed static position with no height, swivel or tilt adjustment
Frame flex behavior	Sled cantilever design provides slight resilient flex when seated
Arm support	Fixed height padded armrests for forearm support
Lumbar support	Contoured built-in lumbar region aligned to natural spine curve
Floor protection	Low-friction non-marking glides allow gentle repositioning without scratching
Storage compatibility	Non-stackable fixed heavy-duty frame design
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Corporate conference rooms	Fixed formal seating suitable for long board and team meetings
Office reception and waiting areas	Professional guest seating for visitor and client reception spaces
Open office collaboration zones	Durable static seating for impromptu team discussion areas
Training and seminar rooms	Consistent, high-capacity seating for scheduled training sessions
Public institution meeting spaces	Heavy-duty commercial seating for government and public facility use
Executive visitor seating	Matching complementary seating placed opposite executive desks
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1:2020	Applies to dimensional classification and safety requirements for office work chairs
EN 1335-2:2018	Applies to structural strength and stability performance requirements
EN 1335-3:2009	Applies to structural durability and test methods for office seating
EN 1022:2018	Applies to stability testing requirements for non-domestic seating
Frame fatigue cycle rating	Recommended references: EN 1335

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.1 通用办公椅

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3326-2016	Applies to dimensional tolerance and size requirements for office seating
GB/T 10357.3-2013	Applies to strength and durability testing of office chair mechanical properties
GB 18584-2001	Applies to limit of harmful substances in wooden furniture components
GB 20210-2006	Applies to fire safety requirements for upholstered office seating

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3326-2016：Applies to dimensional tolerance and size requirements for office seating；
2. GB/T 10357.3-2013：Applies to strength and durability testing of office chair mechanical properties；
3. GB 18584-2001：Applies to limit of harmful substances in wooden furniture components；
4. GB 20210-2006：Applies to fire safety requirements for upholstered office seating；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CANT-HB-640-BLK

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CANT-HB-640-BLK

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CANT-HB-640-BLK打开导出工具

页面快速操作

发布采购询价

产品描述

The High-Back Cantilever Sled Base Office Conference Chair (model CANT-HB-640-BLK, unbranded) is a purpose-built commercial seating solution with a streamlined, formal aesthetic defined by clean linear lines and a cohesive all-black upholstered finish paired with a polished chrome frame. Its cantilever sled base creates an open, uncluttered visual profile that aligns with professional interior design schemes, while fixed aligned armrests and a tall contoured backrest create a balanced, structured silhouette suited to formal public and workspaces. Constructed for heavy commercial use, the chair’s frame is formed from 1.5mm thick chrome-plated cold-rolled steel, built to deliver long-term structural stability. The seat and back feature padded upholstery in abrasion-resistant black PU faux leather, stitched with high-strength polyester bonded thread. The seat core uses 45 kg/m³ high-density high-resilience polyurethane foam at 80mm thickness, supported by a 14mm bent plywood internal board, while the backrest uses 60mm foam padding over a 12mm multi-layer plywood inner support shaped for ergonomic alignment. Fixed armrests combine steel structural supports with soft padded PU tops, and non-marking TPE rubber glides cap the frame base to protect floor surfaces. The chair holds a maximum static load capacity of 180 kg, with upholstery tested to 50000 Martindale abrasion cycles for extended wear resistance. Designed for fixed static positioning with no height, swivel or tilt adjustment, the chair delivers a consistent 125° seated angle with three suggested lock positions, supported by the sled cantilever structure that provides slight resilient flex when occupied for gentle comfort during extended use. The contoured backrest includes a built-in lumbar region aligned to the natural spine curve, and fixed-height armrests offer stable forearm support. Low-friction glides allow gentle repositioning without scratching hard flooring, though the heavy-duty fixed frame is non-stackable for storage. This chair is suited to a wide range of public and professional spaces, including corporate conference rooms for long board and team meetings, office reception and waiting areas for client and visitor seating, open office collaboration zones for impromptu team discussions, training and seminar rooms for high-capacity scheduled sessions, public institution meeting spaces for government and public facility use, and executive office areas as complementary visitor seating opposite work desks. For procurement planning, note each chair ships in two cartons with a packaged gross weight of 23 kg per set and total carton volume of 0.26 m³ per set, requiring 40 minutes of assembly per unit. A 20GP shipping container can hold 135 sets at 85% space utilization for bulk order planning, and the recommended maximum user weight for regular use is 120 kg to preserve long-term product performance.

High-Back Cantilever Sled Base Office Conference Chair Specifications

供应商与现货