纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2200 × 2400 × 380 mm
mattress cavity dimensions	1800 x 2000 mm
perimeter bolster width	200 mm
integrated headrest height	380 mm
mattress compatible maximum thickness	406 mm
floor clearance under base	20 mm
side bolster thickness	150 mm
foot bolster height from floor	280 mm
internal slat spacing	75 mm
center support beam height	250 mm
Side Rail Thickness	40 mm
Slat Spacing	80 mm
Center Support Leg Count	Recommended 6legs

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

static total load capacity	318 kg
net product weight	68 kg
slat system static point load	113 kg
recommended user count	2
mattress lifespan support	10 years
noise reduction performance	35 dB
caster static load rating per wheel	80 kg
Bed Static Load Reference	400 kg
Per-slat Load Reference	60 kg
Recommended Procurement Warranty	Frame 10 years; hardware 5 years; upholstery 2 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

outer upholstery	100% polyester woven fabric
bolster padding	35kg/m³ high-density polyurethane foam
internal frame	18mm thick plywood and engineered wood
support slats	12mm thick solid pine wood slats
center support beam	40mm thick laminated engineered wood
base feet	30mm diameter nylon swivel casters
connection hardware	Zinc-plated steel bolts and brackets
seam construction	8 stitches per inch visible edge stitching
Slat Thickness	15 mm bent plywood or solid timber
Primary Connector Specification	Reference M8-M10 bolts with at least 2 fixing points per corner
Reference Finish / Color Count	Recommended 6timber/upholstery options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

recessed mattress retention	Sunken 100mm deep cavity holds mattress in place without straps
no box spring requirement	Slat system supports mattress directly
hidden caster mobility	Low-profile casters allow repositioning without lifting
perimeter edge seating	200mm wide padded bolsters support seated use at bed edges
tool-assisted assembly	Knock-down design assembles with included hex key
noise-dampening slat pads	Rubber isolators between slats and frame eliminate squeak
floor protection design	Smooth caster housing prevents scuffing on hard flooring
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2300× 900× 450 mm/carton in 4 cartons
Reference Packaged Gross Weight	130 kg/set
Reference Packaging Volume	0.9 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

modern minimalist bedroom	Low-profile design suits tatami and contemporary residential interiors
primary bedroom for two adults	Queen size supports dual occupancy with stable perimeter support
low-ceiling residential spaces	380mm total height maintains open visual flow in compact rooms
pet-friendly household use	Low floor height allows easy pet access without jumping
neutral tone interior palettes	Beige upholstery coordinates with light wood and neutral decor schemes
apartment and condo installations	Caster base allows easy repositioning for cleaning and room rearranging

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1725:1998	Domestic furniture – Beds and mattresses – Safety requirements and test methods
EN 747:2012+A1:2015	Furniture – Bunk beds and high beds – Safety, test methods and requirements

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to frame durability
GB 18584-2001	Indoor decoration material formaldehyde emission limit for wood furniture
GB/T 1952.2-2011	Technical requirements for soft furniture upholstered beds, applicable to padding safety

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to frame durability；
2. GB 18584-2001：Indoor decoration material formaldehyde emission limit for wood furniture；
3. GB/T 1952.2-2011：Technical requirements for soft furniture upholstered beds, applicable to padding safety；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · UPB-LP-SK-2030-BEI

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · UPB-LP-SK-2030-BEI

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · UPB-LP-SK-2030-BEI打开导出工具

页面快速操作

发布采购询价

产品描述

The Beige Upholstered Low-Profile Sunken Tatami Platform Bed, model UPB-LP-SK-2030-BEI, is an unbranded upholstered platform bed designed to blend quiet modern functionality with approachable, space-conscious form. Its silhouette sits low to the floor, anchored by integrated perimeter bolsters that wrap the recessed central mattress cavity, creating a seamless, grounded tatami-inspired layout. A matching integrated headrest aligns flush with the top edge of the side and foot bolsters, while the soft beige woven exterior delivers a warm, neutral visual presence that complements understated interior schemes.
Its construction balances durable structural support with soft, lived-in comfort. The internal frame uses engineered wood and plywood, reinforced by a thick laminated engineered wood center support beam and solid wood support slats fitted with rubber isolators. All padded surfaces, including the wide perimeter bolsters, are wrapped in 100% polyester woven fabric and cushioned with high-density polyurethane foam, finished with consistent visible edge stitching. Connection points use zinc-plated steel hardware, and the base rests on hidden nylon swivel casters set within smooth housings.
The bed supports direct mattress placement without a box spring, using a 100mm deep sunken cavity to hold mattresses securely without additional straps. The padded perimeter bolsters provide stable seating along the bed edges, while hidden casters allow easy repositioning without heavy lifting, and smooth caster housings prevent scuffs on hard flooring. The rubber slat isolators reduce operational noise during use, and the knock-down design assembles with the included hex key.
This bed is well suited for modern minimalist residential bedrooms, particularly primary bedrooms for two adults, low-ceiling compact spaces, and apartment or condo installations where easy rearrangement for cleaning is a priority. Its low floor height accommodates pet-friendly households by allowing easy pet access without jumping, and its neutral beige finish coordinates seamlessly with light wood and neutral-toned decor palettes.
When planning procurement, note that the product ships across multiple cartons per set, with a documented assembly time of 40 minutes per unit. Procurement teams and residential buyers should account for the total packaged weight and volume when coordinating delivery and installation, and verify that selected mattresses meet the maximum compatible thickness to ensure a proper fit within the recessed cavity.

Beige Upholstered Low-Profile Sunken Tatami Platform Bed Specifications

供应商与现货