The Beige Upholstered Low-Profile Platform Bed presents a clean modern silhouette defined by a padded split headboard, low upholstered rails, and a calm neutral finish. Its beige smooth woven fabric or faux-leather cover is finished with tailored edge stitching, giving the frame a soft, residential appearance while retaining a minimalist profile. The headboard spans 1980 mm in width and rises 1200 mm, with 180 mm thick cushioning arranged as two separate columns, each divided into upper and lower padded panels. This layout creates distinct left and right back support areas while presenting a continuous tailored backdrop against the wall. Beneath the upholstery, the bed combines a kiln-dried timber or engineered wood perimeter frame with metal corner brackets. The headboard and side and foot rails use polyurethane or foam padding over rigid or structural backing, while the support deck is built with 16 wood or LVL bent slats spaced 80 mm apart. A steel or wood center beam and three floor-contact support legs reinforce the structure, and low-profile plastic or metal feet with floor-contact pads complete the base. The overall footprint is 1980 x 2220 x 1200 mm, with 320 mm high side rails and a 150 mm open gap beneath the bed for cleaning access. The static load capacity is 363 kg, and the bed is intended for two adults using a 1800 x 2000 mm mattress. Functionally, the integrated slat platform supports the mattress directly, so a box spring is not required. Upholstered side and foot rails form a shallow perimeter ledge that helps reduce mattress movement. The three-sided low-rail arrangement permits entry from the foot or either exposed side, while the open under-bed area allows access for cleaning without offering lift-up storage. The bed is supplied in knockdown form, with the headboard, rails, foot rail, center beam, and slats bolted together on site; the stated assembly time is 40 minutes per set. Matching bedside cabinets are coordinated in beige upholstered or wrapped panels with rounded corners, two drawer fronts, and two horizontal dark pull handles per cabinet. They complement the bed in a king-size master bedroom, modern apartment interior, long-stay or upscale hotel guest room, showroom lifestyle suite, or residential upgrade project. The neutral low-profile form works particularly well with stone-look flooring and restrained wall finishes. Procurement planning should account for an unbranded product, model UPB-K-BEIGE-SPLIT-1800, an 85.1 kg net weight, packaged gross weight of 130 kg per set, two-carton set reference, and 0.9 cubic meter packaging volume.