纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1800 × 2210 × 1190 mm
Headboard height	1190 mm
Mattress support surface height	370 mm
Underbed clearance	270 mm
Headboard padding thickness	80 mm
Side rail height	330 mm
Recommended mattress thickness	356 mm
Underbed storage compartment interior height	220 mm
Metal leg height	150 mm
Slat width	70 mm
Slat spacing	70 mm
Footboard pull handle width	180 mm
Side Rail Thickness	40 mm
Center Support Leg Count	Recommended 6legs

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total static weight capacity	454 kg
Recommended maximum user weight per side	136 kg
Underbed storage drawer load capacity	45 kg
Slat system static load rating	363 kg
Fabric abrasion resistance	30000 cycles
Seating backrest static load at headboard	113 kg
Noise rating during use	<25 dB
Product net weight	72 kg
Minimum warranty period	1 year
Bed Static Load Reference	400 kg

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Headboard outer upholstery	Dusty blue linen-look woven polyester fabric
Headboard cushion upholstery	Off-white linen-look woven polyester fabric
Headboard padding	35kg/m³ high-resilience polyurethane foam
Internal frame structure	E1 grade engineered wood and plywood panels
Slat support system	15mm thick birch plywood slats with metal cross-bracing
Support legs	Matte dark grey powder-coated tapered steel legs
Side rails and footboard	Padded engineered wood wrapped in dusty blue upholstery
Storage hardware	Smooth-glide nylon drawer rollers with metal pull handle
Anti-slip mattress strips	EVA foam strips on slat top surface
Joining hardware	Zinc-plated steel bolts and barrel nuts
Slat Thickness	15 mm bent plywood or solid timber
Primary Connector Specification	Reference M8-M10 bolts with at least 2 fixing points per corner

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Underbed storage access	Foot-operated pull-out storage compartment accessible via metal foot pull
Mattress support system	Full slat platform eliminates requirement for box spring foundation
Mattress retention	Raised upholstered side rails prevent lateral mattress shift during use
Headboard back support	Dual-layer padded headboard supports upright seated posture for reading in bed
Assembly design	Flat-pack RTA construction with included hardware and step-by-step instructions
Floor protection	Plastic glide caps on leg bases prevent hard floor scratching
Storage compartment dust protection	Lined interior reduces dust accumulation on stored items
Suitable mattress types	Compatible with memory foam, latex, hybrid and innerspring mattresses
Color option availability	Available in two-tone blue/white and neutral solid upholstery options
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2300× 900× 450 mm/carton in 4 cartons
Reference Packaged Gross Weight	130 kg/set
Reference Packaging Volume	0.9 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Primary residential use	Master bedroom king-size sleeping configuration for two adult users
Secondary functional use	Upholstered headboard supports seated reading and screen use in bed
Small space suitability	Built-in underbed storage eliminates need for separate underbed organizers
Style matching	Contemporary two-tone blue-white finish coordinates with neutral and modern bedroom decor
Flooring compatibility	Suitable for hardwood, laminate, tile and carpeted bedroom floors
Recommended pairing	Pairs with 1800mm wide matching two-drawer upholstered nightstands
Height compatibility	Low-profile design works with standard ceiling heights and overhead lighting

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 747-1:2012	Furniture bunk beds and high beds safety requirements, applicable structural safety reference
EN 1725:1998	Furniture beds and mattresses safety requirements and test methods for domestic beds
EN 1022:2018	Furniture seating stability test method applicable for headboard seated use

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to frame and structural components
GB 18584-2001	Indoor decorating and refurbishing materials limit of formaldehyde emission for wood furniture
GB/T 19889.6-2005	Acoustics measurement of impact sound insulation, applicable for residential use noise requirements
GB/T 35607-2017	Evaluation standard for green furniture products, recommended for residential bedroom furnishing

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to frame and structural components；
2. GB 18584-2001：Indoor decorating and refurbishing materials limit of formaldehyde emission for wood furniture；
3. GB/T 19889.6-2005：Acoustics measurement of impact sound insulation, applicable for residential use noise requirements；
4. GB/T 35607-2017：Evaluation standard for green furniture products, recommended for residential bedroom furnishing；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · UPB-ST72-CH-BLW

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · UPB-ST72-CH-BLW

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · UPB-ST72-CH-BLW打开导出工具

页面快速操作

发布采购询价

产品描述

This two-tone upholstered platform bed with underbed storage, model UPB-ST72-CH-BLW, offers a streamlined contemporary silhouette anchored by a tall, dual-tone padded headboard finished in coordinating dusty blue and off-white linen-look woven polyester fabric. Tapered matte dark grey powder-coated steel legs support the frame, while matching dusty blue upholstery wraps the padded side rails and footboard for a cohesive, soft visual presence that complements neutral and modern bedroom decor schemes.
Constructed for long-term residential use, the bed features an E1 grade engineered wood and plywood internal frame, paired with 15mm thick birch plywood slats reinforced with metal cross-bracing. The headboard holds 35kg/m³ high-resilience polyurethane foam padding for consistent support, while EVA foam anti-slip strips line the slat tops, and smooth-glide nylon rollers support the underbed storage compartment, accented with a durable metal pull handle. Plastic glide caps fitted to leg bases protect all compatible flooring types, including hardwood, laminate, tile, and carpet.
Functionality is tailored for both rest and daily use: the full slat platform removes the need for an additional box spring, raised upholstered side rails prevent lateral mattress shift, and the thickly padded headboard supports upright seated posture for reading or screen use in bed. The foot-operated pull-out underbed storage compartment features a lined interior to reduce dust buildup, eliminating the need for separate underbed organizers ideal for space-conscious layouts.
Designed for king-size master bedroom configurations supporting two adult users, the bed works as a standalone statement piece or pairs seamlessly with matching 1800mm wide two-drawer upholstered nightstands. For procurement planning, note the product ships as a flat-pack ready-to-assemble set across multiple cartons, with all required hardware and step-by-step instructions included to support straightforward installation, with a reference assembly time per set provided for project scheduling. The design supports use with the specified recommended mattress thickness, with fixed weight ratings aligned to regular dual-occupancy residential use.

Two-Tone Upholstered Platform Bed with Underbed Storage Specifications

供应商与现货