The Two-Tone Channel-Quilted Armless Upholstered Dining Chair (Model DC-TTQ-01, unbranded) features a streamlined contemporary-glam silhouette defined by its intentional two-tone design and tailored stitching details. Visually, the seat and inner back are upholstered in soft beige performance fabric, while the outer back and side shells use a coordinating navy performance fabric, creating subtle, sophisticated contrast. Vertical channel stitching runs down the upper backrest, transitioning to a hexagonal quilt pattern on the lower back to add decorative structure without disrupting the clean, armless profile. Angled rear legs wrapped in matching navy fabric splay outward to widen the chair’s base footprint, while slim brushed gold front legs add a polished, elevated design accent, contributing to a balanced, open layout that pairs seamlessly with surrounding dining furnishings without visual clutter. Constructed for long-term regular use, the chair is built on a 15mm thick plywood inner frame with corner-block reinforced joinery for core structural integrity. The 110mm thick seat cushion uses high-density 45 kg/m³ polyurethane foam layered with a 10mm soft top layer, delivering balanced support with a 45% rebound rate. All upholstery uses 0.8mm thick stain-resistant performance polyester, rated for 30000 Martindale abrasion cycles, with seams tested to 120N tensile strength to resist fraying. Front legs are 1.2mm thick steel tube with a brushed gold electroplated finish tested to 48 hours of salt spray corrosion resistance, while rear legs use matching 1.2mm steel tube wrapped in navy fabric; all legs are fitted with non-marking protective glides. Designed as fixed non-swivel, non-reclining upright seating for dining use, the chair supports a maximum static load of 150 kg, with outward-splayed rear legs reducing forward and side tip risk. The non-marking glides prevent scratches to hard flooring surfaces, and the armless design allows flexible positioning at table edges. It is well suited for residential dining rooms, pairing with standard 750mm high dining tables for daily household meal seating, as well as high-traffic commercial restaurant and cafe spaces where durable upholstery and stable construction deliver reliable performance. For procurement planning, note each chair is sold as a set across two cartons, with a 40-minute reference assembly time per set. Packaged sets have a gross weight of 23 kg and occupy 0.26 m³ of carton space, supporting a maximum load of 135 sets per 20GP container at 85% space utilization. The chair’s fixed dimensions include a 495mm seat height, 515mm seat width, 480mm seat depth, 515mm backrest height, 102-degree backrest angle, 205mm floor clearance under the seat, and 32mm front leg diameter, allowing precise space planning for both residential and commercial layouts.