The Walnut Finish Spindle Back Armless Dining Side Chair (model DC-SB5-WL-PU01, unbranded) balances classic spindle-back detailing with clean modern lines for versatile seating applications. Its visual profile features a warm walnut-stained solid rubberwood frame finished with smooth satin lacquer, anchored by a curved solid wood top rail and five evenly spaced vertical spindles that form the fixed backrest, paired with integrated rear posts for a streamlined, uncluttered silhouette. The armless form sits on four straight legs fitted with injection-molded felt-padded nylon foot caps, with a cross-braced seat apron that reinforces structural cohesion without disrupting the chair’s understated aesthetic. Built for durable daily use, the frame relies on mortise-and-tenon leg joints to deliver wobble-free stability, with a frame joint static load rating of 300 kg. The seat is supported by a 12 mm thick laminated veneer lumber panel, topped with a 60 mm thick cushion filled with 45 kg/m³ high-density polyurethane foam that offers a 45% rebound rate for consistent comfort. The cushion is upholstered in 1.0 mm thick dark brown PU faux leather with a wipe-clean surface, tested to 50000 double rubs for abrasion resistance. The fixed backrest is set to a 4-degree recline with no tilt or adjustment mechanism, providing steady lumbar support during extended meals, while the non-marking felt glides prevent scratches on hard flooring surfaces. Each chair measures 559 x 630 x 965 mm, with a 498 mm seat height, 520 mm seat width, and 495 mm seat depth, sized to tuck fully under standard 750 mm height dining tables to save floor space when not in use. It supports a static weight capacity of 150 kg, with a recommended user weight of 110 kg, and weighs 12 kg per unit. The chair is well suited for residential dining rooms, as well as light commercial settings including casual bistros and cafes where easy-to-clean surfaces are a priority. For procurement, note that orders are packed as one set across two cartons, with a packaged gross weight of 23 kg per set and total carton volume of 0.26 m³ per set; assembly requires 40 minutes per set, and no adjustable foot pads are included, so site surface leveling should be confirmed prior to installation.