纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2200 × 900 × 950 mm
Seat height from floor	450 mm
Seat depth (usable)	580 mm
Backrest total height	580 mm
Armrest height from floor	620 mm
Wood trim panel width (arm side)	180 mm
Base plinth height	60 mm
Total 3-piece set floor footprint (arranged as shown)	3600 x 2800 mm
Seat cushion thickness	150 mm
Backrest padding thickness	120 mm
Back Cushion Thickness	160 mm
Leg Height / Floor Clearance	160 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

3-seater sofa net weight	115 kg
3-seater sofa total static load capacity	480 kg
Seat foam density	40 kg/m³
Foam rebound rate	45%
Upholstery abrasion resistance (Martindale)	50000 cycles
Recommended service life (commercial use)	8 years
Seat foam rebound rate	45%
Upholstery Martindale abrasion resistance	50000 cycles
Seam tensile strength	180 N
Recommended commercial service life	8 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Upholstery surface	Black smooth faux leather (PU leather)
Inner support frame	Kiln-dried hardwood frame
Arm and base trim	Polished solid wood with dark reddish-brown stain and clear lacquer finish
Seat cushion core	High-density polyurethane foam with dacron wrap
Backrest padding	Medium-density polyurethane foam with channeled pleated upholstery
Armrest padding	Padded polyurethane foam under matching black upholstery, capped with curved rolled edge
Foot pads	Hard plastic non-slip glides fitted to wood feet
Seam construction	Reinforced stitched seams with 8 stitches per inch
Upholstery thickness	1.0 mm
Upholstery covering	1.0 mm thick black smooth PU faux leather, vertical channel pleated stitching on backrest sections
Seat support system	80 mm gauge sinuous no-sag springs, spaced 100 mm apart, attached to frame with steel clips
Foot components	Molded solid wood feet fitted with 5 mm thick hard plastic non-slip non-scuff glides

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating configuration	1 three-seater sofa plus two single-seat armchairs, matched design for coordinated reception layout
Seat support	Fixed no-sag spring support under seat cushions, non-reclining fixed back angle
Upholstery design	Vertical pleated stitching on upper backrest sections, smooth seat and lower back panels for formal executive aesthetic
Structural trim	Solid wood accent panels integrated into outer arm supports, full perimeter wood plinth base with decorative molded feet
Floor protection	Non-scuff glide feet on all base corners to prevent damage to hard tile or wood flooring
Cleaning compatibility	Smooth non-porous upholstery surface suitable for regular wipedown with commercial upholstery cleaners
Arrangement flexibility	Modular separate units allow flexible layout as U-shape, straight line, or distributed individual seating per reception room layout
Seat support function	Fixed sinuous spring support under seat cushions provides firm consistent support for upright seated posture, 160 kg per seat static load rating
Upholstery detailing	Vertical channel pleated stitching on upper and middle backrest sections, smooth unpleated seat and lower back panels for formal executive aesthetic
Integrated trim function	Solid wood accent panels integrated into outer arm supports, full perimeter wood plinth base with molded decorative feet to resist scuff damage at floor contact points
Floor protection function	Non-scuff hard plastic glides fitted to all base feet prevent abrasion damage to hardwood, tile, and polished stone office flooring
Layout flexibility	Three independent separate units allow flexible arrangement as U-shaped conversation layout, straight linear placement, or distributed individual seating across adjacent office zones

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Number of shipping packages	3
3-seater sofa carton dimensions	2250 x 950 x 850 mm
Single armchair carton dimensions	1150 x 950 x 850 mm
Total shipment gross weight	260 kg
Total shipment CBM	3.7 m³
On-site assembly time	30 minutes
40ft HQ container loading quantity (set count)	18 sets
Total shipment volume	3.7 m³
40ft HQ container loading quantity	18 sets
Reference Package Count	1 set / 2 cartons

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office reception areas	Formal professional appearance suitable for executive lounge, meeting room waiting areas, and corporate reception zones
VIP meeting rooms	Coordinated 3-piece set provides formal guest seating for boardroom antechambers and client meeting spaces
Government and institutional offices	Conservative formal design is appropriate for government, bank, and institutional public waiting areas
Hotel executive lounges	Durable easy-clean upholstery is suitable for high-traffic hotel business centers and club lounge seating
Corporate manager private offices	Single armchairs may be used as guest seating opposite executive desks, 3-seater for additional seating in large private offices
Recommended maximum seating capacity per set	5 adults
VIP meeting and boardroom antechambers	Coordinated 3-piece set provides structured guest seating for boardroom entrances, client meeting rooms and executive conference waiting spaces
Government and institutional public offices	Conservative formal design is appropriate for government service halls, bank branch waiting areas and institutional public reception zones

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Office furniture safety recommendation	EN 1022:2018 Domestic furniture - Seating - Determination of stability
Upholstered furniture flammability recommendation	EN 1021:2014 Upholstered furniture - Assessment of ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette
Seating stability recommendation	EN 1022:2018 Domestic furniture - Seating - Determination of stability
Upholstery flammability recommendation	EN 1021:2014 Upholstered furniture - Assessment of ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette
Furniture surface durability recommendation	EN 12720:2009 Furniture - Assessment of surface resistance to cold liquids

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Upholstered furniture safety recommendation	GB/T 3324 General technical requirements for wooden furniture
Upholstered furniture durability recommendation	GB/T 2012 Upholstered furniture: Sofa
Formaldehyde emission recommendation	GB 18584 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture
Wood furniture structural safety recommendation	GB/T 3324 General technical requirements for wooden furniture
Sofa durability recommendation	GB/T 2012 Upholstered furniture - Sofa
Harmful substance emission recommendation	GB 18584 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Upholstered furniture safety recommendation：GB/T 3324 General technical requirements for wooden furniture；
2. Upholstered furniture durability recommendation：GB/T 2012 Upholstered furniture: Sofa；
3. Formaldehyde emission recommendation：GB 18584 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture；
4. Wood furniture structural safety recommendation：GB/T 3324 General technical requirements for wooden furniture；
5. Sofa durability recommendation：GB/T 2012 Upholstered furniture - Sofa；
6. Harmful substance emission recommendation：GB 18584 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OFS-3P-BLK-WD

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OFS-3P-BLK-WD

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OFS-3P-BLK-WD打开导出工具

页面快速操作

发布采购询价

产品描述

The JINSLEI 3-Piece Black Faux Leather Executive Office Sofa Set (model OFS-3P-BLK-WD) is a coordinated 1+1+3 seater formal seating collection designed for professional environments. Each unit features smooth black PU faux leather upholstery with structured vertical channel pleated stitching across backrest sections, paired with polished dark reddish-brown solid wood trim on outer arm panels, a full perimeter base plinth, and molded decorative feet. The cohesive, tailored silhouette supports an upright, formal seating position, with padded rolled armrests and tailored paneling that delivers a polished executive aesthetic across all three pieces. Constructed for commercial durability, the set uses a kiln-dried hardwood internal frame, with seat support from sinuous no-sag springs secured with steel clips. Seat and back cushions are built with high and medium-density polyurethane foam cores wrapped in dacron, paired with reinforced stitched seams sized for heavy dly use. The 1.0mm thick faux leather upholstery carries a Martindale abrasion rating suited to high-traffic spaces, while non-scuff hard plastic glides fitted to all wood feet prevent abrasion damage to hardwood, tile, and polished stone flooring. The smooth non-porous upholstery surface supports regular wipedown with standard commercial upholstery cleaners, and the set carries an 8-year service life for commercial use with routine maintenance. All three seating units are fully independent, allowing flexible arrangement as a U-shaped conversation cluster, strght linear seating bank, or distributed individual seats placed across adjacent zones. The set has a total capacity for 5 adult users, with fixed non-reclining back angles calibrated for upright formal seating. This collection is well suited for executive office reception areas, VIP meeting and boardroom antechambers, government and institutional public waiting zones, bank branch service areas, hotel executive lounges and business centers, and private corporate manager offices where formal guest seating is required. For procurement planning, teams should note that shipment includes three separate packages, with short on-site assembly time for final fitting of feet and glides if units ship partially disassembled. Preliminary logistics s are available for 40ft HQ contner loading to support bulk ordering, and purchasers should confirm exact material grades via supplier bill of materials prior to final order confirmation to align with project specification requirements.

3-Piece Black Faux Leather Executive Office Sofa Set with Wood Trim Specifications

供应商与现货