纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2050 × 850 × 850 mm
Seat height from floor	420 mm
Seat depth (usable)	550 mm
Armrest height from floor	620 mm
Backrest height above seat	430 mm
Coffee table lower shelf clearance	180 mm
Seat cushion thickness	120 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Single sofa seat static load capacity	150 kg
Total set net weight range	185 kg
Recommended total occupant capacity	5 persons
Seat foam density	40 kg/m³
Upholstery abrasion resistance	50000 Martindale cycles
Seam stitch pitch	8 stitches per inch
Maximum total occupant capacity	5 persons
Reinforced seam stitch pitch	8 stitches per inch
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Sofa seat and back upholstery	Black matte faux leather (PU)
Sofa outer side panel upholstery	Warm brown matte faux leather (PU)
Seat core padding	High-density polyurethane foam
Sofa internal frame	20mm thick kiln-dried hardwood + 1.2mm steel support bars
Sofa base glides	Black non-marking plastic floor glides
Coffee table top	8mm thick black tempered glass with polished silver trim edge
Coffee table frame and lower shelf	1.2mm thick matte black powder-coated steel
Armrest padding	20mm thick high-density foam wrapped in matching black faux leather
Seat, backrest and armrest top upholstery	1.0mm thick matte black polyurethane (PU) leather
Seating outer side panel upholstery	1.0mm thick matte saddle brown polyurethane (PU) leather
Seat and back core padding	40kg/m³ high-resilience polyurethane foam
Seating internal load-bearing frame	20mm thick kiln-dried hardwood with 1.2mm thick steel cross-support bars

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating configuration	Fixed modular set with 1 three-seat sofa and 2 matching single armchairs
Seat support	Fixed non-tilting, non-reclining padded seat base
Coffee table storage	Two-tier open storage with upper glass top and lower solid steel shelf
Floor protection	Non-marking fixed glides on all seating and table legs
Upholstery maintenance	Smooth non-porous faux leather surface that wipes clean with standard office cleaning products
Placement flexibility	Freestanding units that can be arranged in symmetrical face-to-face, L-shape or linear layouts
Seat support mechanism	Fixed non-tilting, non-reclining rigid padded seat base
Coffee table storage design	Two-tier open storage with upper glass top and lower steel shelf
Floor protection feature	Fixed non-marking glides installed on all seating and table legs
Upholstery maintenance property	Non-porous smooth PU leather surface that wipes clean with neutral office cleaning products in 1 minute
Layout flexibility	Freestanding individual units that support symmetrical face-to-face, L-shaped or linear placement
Armrest functionality	Wide flat padded armrests supporting 10kg vertical load

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Total shipping carton count	4 cartons
Largest carton dimensions (3-seater sofa)	2100 x 900 x 600 mm
Total shipment gross weight	210 kg
Total shipment volume	1.8 CBM
On-site assembly time	40 minutes
20ft GP container loading quantity	18 sets
40ft HQ container loading quantity	44 sets
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Corporate office reception areas	Formal two-tone design creates a professional first impression for visitors, with seating for 5 people suitable for small guest greeting areas
Executive office waiting zones	Durable easy-clean upholstery and structured support suits short-term waiting use outside senior management offices
Small meeting lounge spaces	Symmetrical configuration paired with central coffee table supports casual team discussions or client breakout meetings
Public institution visitor areas	High-wear faux leather and solid frame construction tolerates high daily foot traffic in government, bank or healthcare waiting spaces
Recommended matching configuration	Pair with the included black glass coffee table to create a complete ready-to-install reception set, no additional side tables required for basic use
Corporate main reception areas	Formal two-tone black and brown design creates a professional first impression for visitors, with 5-person capacity suitable for 20sqm small-to-medium guest greeting zones
Small informal meeting lounges	Symmetrical 3+1+1 configuration paired with central coffee table supports 60 minute casual team discussions or client breakout meetings
Public service institution visitor areas	High-wear PU upholstery and rigid steel-reinforced frame tolerates high daily foot traffic in bank, government service hall or healthcare admin waiting spaces

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Applicable standard for office seating strength and stability	EN 16139:2013 Furniture - Strength, durability and safety - Non-domestic seating
Applicable standard for upholstery fire performance	EN 1021:2014 Furniture - Assessment of the ignitability of upholstered furniture - Ignition source smouldering cigarette
Non-domestic seating strength reference	EN 16139:2013 Furniture - Strength, durability and safety - Non-domestic seating
Upholstered furniture fire safety reference	EN 1021:2014 Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.4 公共及休闲座椅

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Applicable standard for upholstered furniture durability	GB/T 3324 General technical requirements for wooden furniture
Applicable standard for leather/faux leather upholstery	GB/T 16799 Polyurethane synthetic leather for furniture
Applicable standard for tempered glass safety	GB 15763.2 Safety glazing materials in building - Part 2: Tempered glass
Upholstered furniture structural durability reference	GB/T 3324 General technical requirements for wooden furniture
Furniture PU leather performance reference	GB/T 16799 Polyurethane synthetic leather for furniture
Tempered glass safety reference	GB 15763.2 Safety glazing materials in building - Part 2: Tempered glass

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Applicable standard for upholstered furniture durability：GB/T 3324 General technical requirements for wooden furniture；
2. Applicable standard for leather/faux leather upholstery：GB/T 16799 Polyurethane synthetic leather for furniture；
3. Applicable standard for tempered glass safety：GB 15763.2 Safety glazing materials in building - Part 2: Tempered glass；
4. Upholstered furniture structural durability reference：GB/T 3324 General technical requirements for wooden furniture；
5. Furniture PU leather performance reference：GB/T 16799 Polyurethane synthetic leather for furniture；
6. Tempered glass safety reference：GB 15763.2 Safety glazing materials in building - Part 2: Tempered glass；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RCV-SOFA-311-2024

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RCV-SOFA-311-2024

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RCV-SOFA-311-2024打开导出工具

页面快速操作

发布采购询价

产品描述

This unbranded 3+1+1 leather office reception sofa set, model RCV-SOFA-2024is a coordinated public seating package that includes one three-seater sofa, two matching single armchairs, and a companion coffee table, designed for formal, high-traffic visitor spaces. The set features a polished two-tone visual design, with matte black faux leather upholstery across seat surfaces, backrests, and wide padded armrests, accented by warm saddle brown faux leather wrapping the full lower side panels of all seating units for a refined, professional contrast. Stitched panel detling adds subtle texture to the black upholstered surfaces, while the coffee table brings a sleek complementary finish with a black tempered glass top edged in polished silver trim, supported by a matte black powder-coated metal frame. The seating units follow standard commercial reception proportions, with fixed upright seat bases and no reclining or tilting mechanisms to support formal, relaxed conversation posture. Seat surfaces use high-resilience polyurethane foam padding for firm, durable support, with integrated lumbar and mid-back support tailored for short-stay seating. Non-marking plastic glides fitted to all seating and table legs protect hard flooring surfaces including polished wood, ceramic tile, and vinyl from scuffs and scratches. The two-tier coffee table aligns with standard reception seat height, offering a smooth upper surface for beverage service and document placement, plus an open lower steel shelf for discreet storage of reading materials, visitor forms, or spare supplies. The wide, padded armrests provide stable arm support and can hold small personal items such as mobile phones or notepads during use. The non-porous faux leather upholstery wipes clean quickly with standard neutral office cleaning products, supporting fast spill and stn removal in spaces with continuous visitor flow. All units are freestanding and require no permanent floor fixing, allowing flexible arrangement in symmetrical face-to-face, L-shaped, or linear layouts to suit different room dimensions and event needs, with a total rated occupant capacity of 5 people across the set. This set is well suited for a range of commercial and public-facing spaces, including corporate main reception areas, executive office waiting zones, small informal meeting lounges, and public service institution visitor areas such as bank lobbies, government service halls, and healthcare administrative waiting spaces. Its dark two-tone finish conceals minor everyday wear and stns, while its structured, formal aesthetic aligns with modern minimalist business interior standards. For procurement teams, note that select material specifications including exact upholstery grade, foam performance metrics, internal frame material details, and glass/metal coating specifications require confirmation via supplier documentation and production samples. The set ships across multiple cartons with an on-site assembly time of 40 minutes using included hardware, and is available as a complete ready-to-install package that eliminates the need for separate coordinating side table purchases for basic reception use.

3+1+1 Leather Office Reception Sofa Set with Matching Coffee Table Specifications

供应商与现货