纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1500 × 1000 × 450 mm
Tabletop thickness	30 mm
Base height	420 mm
Base footprint	1420 x 920 mm
Floor clearance under base	5 mm
Tabletop edge profile	Eased polished edge
Top overhang (per side)	40 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net product weight	100 kg
Distributed static load capacity	95 kg
Surface flatness tolerance	0.5 mm
Surface polish gloss level	85 degrees
Stone water absorption rate	0.2%
Recommended placemat weight limit	15 kg
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop	Polished natural marble/quartzite with dark natural veining, sealed stain-resistant finish
Plinth base	Dark solid engineered stone block with matte finish
Underside padding	3mm thick EVA anti-scratch floor protection pads
Leveling feet	4x adjustable stainless steel glides, recessed into base bottom
Joint adhesive	Two-component structural stone epoxy between top and base
Surface sealant	Penetrating stone sealer, food-safe for serving use
Base core	High-density fiberboard core clad in dark stone composite
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Leveling adjustment	Recessed adjustable feet compensate for 10mm of floor unevenness
Surface utility	Polished flat top supports serving trays, decor, books and beverage service
Sealed surface protection	Penetrating sealer resists common household beverage stains when spills are blotted promptly
Anti-scratch protection	Underside pads prevent abrasion to hard flooring surfaces when repositioning
Custom sizing compatibility	Dimensions and edge profiles support custom modification per project requirements
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Primary application	Residential living room lounge area, positioned between sofa and armchairs
Secondary application	Hotel suite or luxury lounge reception area seating zone
Recommended pairing	Coordinates with low-profile upholstered seating, light area rugs and minimalist decor
Use case	Supports beverage service, decorative displays, reading material and small tabletop plants
Suitable flooring types	Hardwood, tile, polished concrete or low-pile carpet with protective glides
User profile	Design-focused residential buyers, hospitality specifiers seeking minimalist luxury furniture

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CT-PLSTN-15010045

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CT-PLSTN-15010045

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CT-PLSTN-15010045打开导出工具

页面快速操作

发布采购询价

产品描述

This unbranded Model CT-PLSTN-15010045 rectangular coffee table delivers a minimalist, contemporary low-profile silhouette defined by clean lines and balanced visual weight. Its veined polished natural stone top sits flush over a dark solid block plinth base, with a 40mm overhang on all sides and an eased polished edge that softens the table’s sharp geometric form. The low-rise plinth sits close to the floor, creating a grounded, unobtrusive profile that anchors seating layouts without overwhelming surrounding decor.
The tabletop is crafted from polished natural marble or quartzite with distinct dark natural veining, finished with a food-safe penetrating stone sealer that creates a stain-resistant surface, with an 85-degree gloss polish and 0.5mm surface flatness tolerance. It features an eased polished edge and finished thickness of 45mm, joined to the base with two-component structural stone epoxy. The plinth base has a high-density fiberboard core clad in dark matte engineered stone composite, with 2mm edge banding, and incorporates four recessed adjustable stainless steel leveling glides that compensate for uneven flooring. Three-millimeter thick EVA anti-scratch pads line the base underside to protect hard floor surfaces during repositioning. The unit has a net weight of 100kg, supporting 150kg of uniformly distributed static load across the top, with a 95kg distributed static load capacity for general use, and a 15kg weight limit for individual placemats. The polished flat surface supports serving trays, decorative objects, reading material, and beverage service, with the sealed finish resisting common household beverage stains when spills are blotted promptly. Recessed leveling feet adjust to accommodate 10mm of floor unevenness for stable placement on uneven surfaces, and the table supports custom dimension and edge profile modifications for project-specific needs. An integrated cable management system holds up to 10 power or data cables, with a tray load rating of 10kg, and structural joints support up to five controlled assembly cycles. Shipped in two cartons per set, assembly takes an 40 minutes per unit.
This table is designed for primary placement in residential living room lounge areas, positioned between sofas and armchairs, with secondary suitability for hotel suite seating zones and luxury lounge reception areas. It pairs seamlessly with low-profile upholstered seating, light-toned area rugs, and minimalist decor, accommodating tabletop displays, small potted plants, and everyday beverage service. It works safely on hardwood, tile, polished concrete, and low-pile carpet when paired with its included protective glides, serving design-focused residential buyers and hospitality specifiers seeking minimalist luxury furnishings.
Procurement teams should note custom modifications are available for project-specific layouts, while final purchasers should account for the two-carton shipping configuration and required assembly time, and adhere to published load limits to maintain long-term surface and structural integrity. Orders ship as one set across two cartons, with a packaged gross weight of 90kg per set and 0.55 cubic meters of packaging volume per unit, to support accurate freight and receiving planning.

Modern Rectangular Polished Veined Natural Stone Coffee Table with Dark Plinth Base Specifications

供应商与现货