| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Overall set seating layout dimensions | 3400 x 2400 x 900 mm | |
|---|---|---|
| Two-seat loveseat individual dimensions | 2000 x 850 x 900 mm | |
| Single armchair individual dimensions | 900 x 850 x 900 mm | |
| Seat height from floor to top of seat cushion | 450 mm | |
| Seat depth from front edge of seat to front face of back cushion | 600 mm | |
| Backrest height from top of seat cushion to top of back cushion | 480 mm | |
| Armrest height from floor to top of armrest pad | 620 mm | |
| Armrest width from outer edge to seat side | 120 mm | |
| Seat cushion thickness | 120 mm | |
| Back cushion thickness | 100 mm | |
| Leg height from floor to base of sofa frame | 150 mm | |
| Clearance between facing seating units for central coffee table | 600 mm | |
| Leg Height / Floor Clearance | 160 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Total set net weight range | 125 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Total seating capacity across full set | 4 people | |
| Seat foam density | 45 kg/m³ | |
| Back foam density | 35 kg/m³ | |
| Foam rebound rate | 45% | |
| Seam stitch pitch | 8 stitches per 30mm | |
| Upholstery abrasion resistance rating | 50000 Martindale cycles | |
| Recommended usable lifespan under daily office use | 8 years | |
| Total set seating capacity | 4 people |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Primary seating upholstery (seat, back, inner arm) | Dark emerald green matte faux leather | |
|---|---|---|
| Outer panel upholstery (lower frame, outer arm, side trim) | Charcoal dark gray matte faux leather | |
| Seat cushion inner structure | High-resilience polyurethane foam wrapped in polyester dacron layer | |
| Back cushion inner structure | Tufted high-resilience polyurethane foam with button tuft detail | |
| Inner load-bearing frame | Kiln-dried solid hardwood with 12mm thick plywood reinforcement panels | |
| Support legs | 1.2mm wall thickness powder-coated matte black steel tapered legs | |
| Armrest internal structure | Padded foam over plywood core with wrapped upholstery | |
| Hardware connection points | Zinc-plated steel corner brackets and screws | |
| Primary upholstery (seat, back, inner arm panels) | Dark emerald green matte faux leather | |
| Contrast upholstery (lower frame, outer arm, side trim) | Charcoal dark gray matte faux leather | |
| Seat cushion internal structure | 45kg/m³ high-resilience polyurethane foam wrapped in 200g polyester dacron layer | |
| Back cushion internal structure | Tufted 35kg/m³ high-resilience polyurethane foam with matching faux leather button tuft details |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Seating configuration | Fixed 3-piece set including 1 two-seat loveseat and 2 matching single armchairs | |
|---|---|---|
| Cushion design | Fixed non-removable seat and back cushions | |
| Floor clearance function | 150mm raised leg height provides full under-sofa access for vacuuming and routine floor cleaning | |
| Back support design | Tufted back cushions with integrated 40mm lumbar support contour | |
| Upholstery maintenance | Smooth matte faux leather surface can be wiped clean with mild detergent and soft cloth | |
| Leg stability | Four tapered steel legs per seating unit with floor protection glides | |
| Layout flexibility | Individual seating units can be repositioned to suit different reception room shapes | |
| Arm support function | Padded full-length armrests run from front edge of seat to back frame | |
| Cushion mounting | Fixed non-removable seat and back cushions secured to frame with metal clips | |
| Under-unit access | 150mm raised leg height provides full access for vacuuming and routine floor cleaning | |
| Stability design | Four tapered steel legs per unit with non-marking floor glides | |
| Layout adaptability | Freestanding individual units can be repositioned to suit different reception room shapes |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Total number of shipping cartons for full 3-piece set | 3 cartons | |
|---|---|---|
| Two-seat loveseat shipping carton dimensions | 2050 x 900 x 650 mm | |
| Single armchair shipping carton dimensions (per unit) | 950 x 900 x 650 mm | |
| Total gross shipping weight for full set | 145 kg | |
| Total shipping volume (CBM) for full set | 2.31 CBM | |
| Assembly time per full set for 2-person installation team | 60 minutes | |
| 40ft HQ container loading quantity for full sofa sets | 28 sets | |
| Standard export packaging protection | 5-layer corrugated carton, EPE foam wrap, corner protectors, sealed with PP strapping | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
推荐空间 / 目标用户 / 使用方式
| Corporate executive reception areas | Formal two-tone design suits professional office reception spaces for hosting clients and visitor meetings, paired with central coffee table as shown | |
|---|---|---|
| Office lounge and breakout zones | Comfortable padded seating supports informal employee discussions and short rest breaks during work hours | |
| Small meeting and waiting rooms | 4-person seating capacity fits compact waiting areas outside executive offices or conference rooms without occupying excess floor space | |
| Shared workspace common areas | Durable easy-to-clean upholstery withstands high daily foot traffic in co-working and open-plan office common areas | |
| Public institution visitor waiting areas | Neutral two-tone color scheme and robust construction suit government, bank or service centre waiting spaces | |
| Recommended matching furniture | Black metal frame glass-top or marble-look coffee table as pictured, positioned centrally between seating units for holding reading materials and beverages | |
| Recommended flooring compatibility | Suitable for polished tile, luxury vinyl tile and low-pile commercial carpet flooring, integrated leg glides prevent surface damage | |
| Small waiting rooms outside executive offices | 4-person seating capacity fits compact waiting areas without occupying excessive floor space |
欧洲市场准入与化学品要求
| EN 1022:2018 Domestic furniture - Seating - Determination of stability | Applies to stability testing of individual seating units to prevent tipping during normal use | |
|---|---|---|
| EN 14465:2018 Furniture - Upholstered furniture seating - Test methods for seating durability | Applies to cyclic load durability testing of seat and back cushions for commercial use | |
| EN 12520:2015 Furniture - Strength, durability and safety - Requirements for domestic seating | Applicable strength and safety benchmark for structural components including legs and frame | |
| EN 13759:2018 Furniture - Upholstered furniture - Test methods for assessment of resistance to ignition | Applies to ignition resistance testing of upholstery materials for public space safety compliance |
美国及加拿大办公家具标准
适用于中国市场项目的标准
| GB/T 3324-2017 General technical requirements for wooden furniture | Applies to structural strength, dimensional stability and safety of the wooden inner frame of the sofa set | |
|---|---|---|
| GB 20400-2006 Leather and fur - Limit of harmful matter | Applies to restricted substance limits for faux leather upholstery materials for indoor office use | |
| GB/T 19001-2016 Quality management systems - Requirements | Applicable as quality management reference for consistent production and incoming material inspection | |
| GB/T 27717-2011 Furniture for public use - Sofa | Applies to structural durability, safety and performance requirements for public area reception sofas | |
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applies to formaldehyde and heavy metal emission limits for plywood and wood frame components |
本产品须满足以下技术参数要求： 1. GB/T 3324-2017 General technical requirements for wooden furniture：Applies to structural strength, dimensional stability and safety of the wooden inner frame of the sofa set； 2. GB 20400-2006 Leather and fur - Limit of harmful matter：Applies to restricted substance limits for faux leather upholstery materials for indoor office use； 3. GB/T 19001-2016 Quality management systems - Requirements：Applicable as quality management reference for consistent production and incoming material inspection； 4. GB/T 27717-2011 Furniture for public use - Sofa：Applies to structural durability, safety and performance requirements for public area reception sofas； 5. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture：Applies to formaldehyde and heavy metal emission limits for plywood and wood frame components； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具The 3-Piece Two-Tone Upholstered Office Lounge Sofa Set is a purpose-built contract seating solution designed for formal and casual shared seating environments. Visually, the set features a coordinated two-tone matte faux leather finish, with dark emerald green upholstery covering seat surfaces, back cushions, and inner arm panels, contrasted by charcoal dark gray panels on lower frames, outer arms, and side trim. Button tufting on back cushions adds subtle tailored detail, while slender tapered matte black powder-coated steel legs lend a streamlined, modern profile. The standard configuration places one two-seat loveseat against a rear wall, with two matching single armchairs positioned opposite each other, leaving dedicated clearance for a central coffee table to create a face-to-face 4-person seating arrangement aligned with mainstream office lounge proportions. Each seating unit is built on a kiln-dried solid wood inner frame reinforced with plywood panels, designed to resist warping with regular commercial use. Seat cushions use high-resilience high-density polyurethane foam wrapped in a polyester dacron layer for durable support, while tufted medium-density back cushions include an integrated lumbar contour to encourage upright, comfortable posture during meetings or waits. Full-length padded armrests offer continuous forearm support aligned with relaxed seated elbow height, and non-marking floor glides fitted to each leg prevent scratches to hard flooring surfaces. Fixed non-removable cushions secured to the frame reduce displacement risks in high-traffic areas, while the smooth non-porous faux leather surface wipes clean easily with mild detergent to address accidental spills. Raised leg height creates sufficient under-unit clearance for routine vacuuming and floor cleaning, and freestanding individual units can be repositioned to adapt to different room layouts without permanent connecting hardware. This set is well suited for a range of commercial and public spaces, including corporate executive reception areas, office breakout zones, small waiting rooms outside conference or executive suites, co-working common areas, and public institution visitor waiting spaces in banks, government offices, or service centres. It pairs seamlessly with black metal-frame glass or marble-look coffee tables, and performs reliably on polished tile, luxury vinyl tile, and low-pile commercial carpet. For procurement planning, note that the set ships in knock-down packaging with each seating unit packed in separate cartons, requiring simple leg attachment and cushion placement for assembly. Full sets pack efficiently for bulk shipping, and the set is rated to support standard commercial static loads per seat, with abrasion-resistant upholstery engineered for consistent daily use over its expected service lifespan. Buyers should confirm exact material specifications, final packaging details, and hardware corrosion resistance grades directly with suppliers prior to final order placement, as specific grade documentation requires supplier bill of materials confirmation.
关注我们