纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1940 × 770 × 910 mm
Overall 3-seater sofa dimensions	1940 x 770 x 910 mm
Single armchair dimensions	830 x 770 x 910 mm
Seat height from floor	460 mm
Seat depth per position	500 mm
Backrest height above seat	450 mm
Armrest height above floor	660 mm
Coffee table top thickness	10 mm
Seating frame tube diameter	32 mm
Clearance under coffee table	150 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total seating capacity	5 persons
Load capacity per seat position	150 kg
Upholstery abrasion resistance	100000 double rubs
Seat foam density	45 kg/m³
Seat foam rebound rate	60%
Set total net weight	85 kg
Frame corrosion resistance life	10 years
Standard product warranty	3 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seating upholstery	1.0mm thick commercial grade black PU leather
Seat and back padding	High-resilience polyurethane foam, 80mm thick on seats, 60mm on backrests
Seating support frame	2.0mm thick chrome-plated cold-rolled steel tube, cantilever sled base
Armrest construction	Chrome steel frame with wrapped black PU padded top surface
Coffee table top	10mm thick black tempered safety glass with polished edges
Coffee table frame	1.5mm thick chrome-plated square steel tube with lower U-shaped stretchers
Foot pads	Non-slip rubber end caps on all frame legs
Frame fasteners	Zinc-plated steel bolt hardware for KD assembly
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating support mechanism	Fixed cantilever sled frame provides mild flex without adjustment
Seat ergonomics	Upright padded back and contoured seat support short-term waiting posture
Coffee table utility	Flat smooth glass top holds reading materials, drinkware and small items
Frame floor protection	Rubber foot pads prevent floor scratches and reduce movement noise
Cleaning and maintenance	Smooth PU and glass surfaces wipe clean with standard non-abrasive cleaners
Assembly structure	Knock-down design with bolted frame connections for on-site assembly
Color option support	Custom upholstery color options available for bulk orders
Set layout flexibility	Seating pieces can be repositioned separately for different waiting area layouts
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Office reception lobbies	Formal black/chrome aesthetic suits professional corporate guest waiting areas
Hospital outpatient waiting zones	Durable easy-clean surfaces withstand high daily public traffic
Bank or financial service waiting areas	Upright supportive seating provides professional guest experience for short waits
Hotel business center lounges	Matched cohesive set creates organized, polished seating for visiting clients
Government public service halls	Sturdy frame and stain-resistant upholstery support heavy daily public use
Small business meeting breakout areas	Compact layout fits in secondary meeting spaces for informal discussions
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-2:2018	Office work chair safety requirements, referenced for seating structural stability
EN 12521:2015	Furniture strength, durability and safety for domestic seating, referenced for load testing
EN 12150-1:2015	Tempered soda lime silicate glass safety standards, applicable for coffee table top

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1-2017	General purpose office chairs standard, referenced for seating static load testing
ANSI/BIFMA X5.4-2022	Lounge and public seating standard, referenced for public area durability requirements

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for structural safety verification of frame attachments
GB 28007-2011	Safety requirements for children's furniture, applicable for edge and corner safety checks in public spaces
GB/T 19995.1-2005	Performance requirements for glass furniture tops, applicable for tempered glass safety verification

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for structural safety verification of frame attachments；
2. GB 28007-2011：Safety requirements for children's furniture, applicable for edge and corner safety checks in public spaces；
3. GB/T 19995.1-2005：Performance requirements for glass furniture tops, applicable for tempered glass safety verification；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · REC-SET-113-CHR-BLK-GL

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · REC-SET-113-CHR-BLK-GL

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · REC-SET-113-CHR-BLK-GL打开导出工具

页面快速操作

发布采购询价

产品描述

This coordinated office reception seating set with matching coffee table delivers a polished, functional solution for structured public waiting and casual gathering spaces, anchored by a sleek modern aesthetic defined by contrasting chrome framing and uniform black finishes. The set comprises one three-seat sofa, two single armchairs, and one complementary coffee table, arranged to create an organized, symmetrical seating cluster that balances open guest flow with defined seating positions. Each seating piece features a streamlined cantilever sled base that eliminates bulky rear legs for a light, uncluttered visual profile, while padded, integrated armrests align with the straight-lined upholstered seat and back forms. The coffee table sits centered within the seating layout, its low profile and wide black top providing a convenient shared surface without blocking sightlines across the space. All seating elements are built with thick chrome-plated cold-rolled steel tube frames, secured with zinc-plated bolt hardware for knock-down on-site assembly, with non-slip rubber end caps fitted to every leg base. Seating surfaces are upholstered in commercial-grade black PU, padded with high-resilience polyurethane foam of varying thickness across seats and backrests, supported by internal bent wood or equivalent support boards. The cantilever frame structure delivers mild, consistent flex without adjustable components, while the upright padded backrests and contoured seats are shaped to support comfortable short-term waiting postures. The matching coffee table features a thick tempered black glass top with polished edges, set on a chrome-plated square steel tube frame reinforced with lower U-shaped stretchers for stable placement. The smooth, non-porous PU and glass surfaces wipe clean easily with standard non-abrasive cleaners, supporting low-effort upkeep in high-traffic settings. Rubber foot pads on all frames prevent floor scratching and reduce noise from movement during regular use. The set holds a total of five guests across its seating positions, with a cohesive, formal aesthetic well suited to professional commercial environments including corporate office reception lobbies, hospital outpatient waiting zones, bank and financial service waiting areas, hotel business center lounges, government public service halls, and small business meeting breakout areas. For procurement planning, teams should account for on-site assembly requirements, note that custom upholstery color options are available for bulk orders, and reference the standard packaged shipping configuration for delivery and storage coordination. The durable frame construction and abrasion-resistant upholstery are engineered to withstand consistent daily public use across high-footfall settings.

1+1+3 Chrome Frame Black PU Office Reception Seating Set with Black Glass Coffee Table Specifications

供应商与现货