纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	610 × 590 × 820 mm
Seat height	480 mm
Seat width	470 mm
Seat depth	430 mm
Backrest height	380 mm
Armrest height	680 mm
Bentwood frame member thickness	30 mm
Sled base front-to-back length	570 mm
Armrest inner clearance width	490 mm
Seat cushion thickness	80 mm
Backrest padding thickness	60 mm
Finished Seat Cushion Thickness	90 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight per unit	12 kg
Recommended static load capacity	160 kg
Seat foam density	45 kg/m³
Foam rebound rate	42%
Upholstery abrasion resistance	30000 Martindale cycles
Frame static load rating	200 kg
Warranty period	1 year
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Frame construction	Walnut-stained bent solid wood
Seat upholstery face	Off-white matte woven fabric
Backrest rear upholstery	Dark green matte woven fabric
Seat padding	High-density polyurethane foam
Backrest padding	Medium-density polyurethane foam
Frame fasteners	Brass-finish metal hardware
Floor contact pads	Non-slip felt/rubber pads
Frame finish	Clear satin lacquer
Upholstery seam pitch	30 mm
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Base design	Fixed cantilever sled base
Armrest configuration	Integrated continuous loop armrests
Seating support	Fixed upright ergonomic posture
Floor protection	Padded contact points on base feet
Assembly requirement	Partial knock-down assembly
Upholstery care	Stain-resistant wipe-clean surface
Color configuration	Fixed two-tone off-white/dark green upholstery
Stacking capability	Non-stacking design
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential dining space	Suitable for standard 750mm height dining tables, paired with matching dining sets
Home office study space	Upright supportive seating for use with writing desks and workstations
Meeting room seating	Sled base design suitable for small conference and meeting room layouts
Cafe and hospitality space	Durable upholstered design for casual restaurant and bistro seating
Accent lounge placement	Contemporary two-tone aesthetic works as standalone accent seating in living areas
Matching configuration	Available for bulk purchase as uniform seating for open-plan dining or co-working spaces
Recommended floor type	Suitable for hard wood, tile and low-pile carpeted floor surfaces with protective pads
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12520:2015	Applicable strength, durability and safety requirements for domestic seating
EN 1022:2018	Applicable stability test standard for domestic seating furniture

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	Applicable general technical requirements for wooden furniture
GB 18584-2001	Applicable indoor decoration material limit for harmful substances in wooden furniture
GB/T 2828.1-2012	Applicable sampling inspection procedure for furniture lot acceptance

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：Applicable general technical requirements for wooden furniture；
2. GB 18584-2001：Applicable indoor decoration material limit for harmful substances in wooden furniture；
3. GB/T 2828.1-2012：Applicable sampling inspection procedure for furniture lot acceptance；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · BW-CA-2T-082

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · BW-CA-2T-082

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · BW-CA-2T-082打开导出工具

页面快速操作

发布采购询价

产品描述

The Two-Tone Upholstered Cantilever Bentwood Dining Armchair (model BW-CA-2T-08, unbranded) features a sleek contemporary silhouette defined by clean, flowing lines for modern public and residential settings. Its visual identity centers on a warm walnut-stained bentwood frame finished with clear satin lacquer, paired with a fixed two-tone upholstery scheme: off-white matte woven fabric covers the seat-facing upholstery, while dark green matte woven fabric clads the rear backrest, creating a subtle, sophisticated color contrast. Integrated continuous loop armrests extend seamlessly from the 30mm thick bentwood frame, connecting to a fixed cantilever sled base that lends an open, uncluttered visual profile suitable for a range of layout styles. Constructed for consistent daily use, the chair’s frame is built from bent solid wood with a frame static load rating of 200kg, secured with brass-finish metal hardware for a refined, cohesive detail. Seating surfaces are padded with high-density polyurethane foam in the seat and medium-density polyurethane foam in the backrest, with seat foam density reaching 45kg/m³ and a 42% foam rebound rate to support upright ergonomic posture. The upholstery offers 30,000 Martindale abrasion resistance and a stain-resistant, wipe-clean surface for easy upkeep, with evenly spaced 30mm seam pitch for tailored, durable construction. Non-slip felt and rubber pads on the sled base feet prevent floor scuffing and reduce movement noise during use. Key functional attributes include a 160kg recommended static load capacity, 12kg net weight per unit, and partial knock-down assembly requiring 40 minutes per set to complete, with all necessary fasteners included. It ships in 2 cartons per set, with packaged gross weight of 23kg per set, supporting efficient bulk loading for commercial projects. This armchair is versatile across multiple space types: it pairs seamlessly with standard 750mm height dining tables in residential dining areas, provides upright supportive seating for home office writing desks and workstations, fits neatly into small conference and meeting room layouts, delivers durable casual seating for cafes, bistros and hospitality venues, and works as a standalone accent seat in living or lounge zones. It is also available for uniform bulk purchase to outfit open-plan dining areas or co-working spaces. Procurement teams should note the 1-year warranty period, and plan for assembly coordination when placing bulk orders, with 135 sets fitting in a 20GP container at 85% space utilization for large-scale project planning.

Two-Tone Upholstered Cantilever Bentwood Dining Armchair Specifications

供应商与现货