纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1800 × 1800 × 770 mm
Tabletop thickness	50 mm
Central lazy Susan diameter	1200 mm
Lazy Susan thickness	30 mm
Cylindrical pedestal base diameter	600 mm
Pedestal base height	720 mm
Bottom metal foot trim diameter	650 mm
Metal foot trim thickness	20 mm
Seating clearance per place setting	680 mm
Under-table leg clearance height	670 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total product net weight	75 kg
Distributed static tabletop load capacity	250 kg
Recommended seating capacity	8 people
Wood surface scratch resistance rating	2H pencil hardness
Finish heat resistance temperature	80 °C
Structural frame warranty period	3 years
Finish warranty period	1 year
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Main tabletop material	Walnut-finished solid hardwood, 50mm thick, matte clear polyurethane coating
Central lazy Susan material	Matching solid hardwood with smooth edge, fitted with steel rotating bearing
Cylindrical pedestal base	Walnut wood veneer over engineered wood core, vertical grain matching tabletop
Bottom foot trim ring	Dark matte coated carbon steel, 20mm thick, floor-protective felt lining
Lazy Susan rotating bearing	Zinc-plated steel ball bearing, 360° rotation, low-friction design
Tabletop to pedestal mounting hardware	Rust-resistant zinc-plated steel bolts, 10mm diameter, 8 connection points
Surface coating	Low-VOC matte clear polyurethane finish, 0.15mm dry film thickness
Floor protection pads	5mm thick felt pads under base trim, non-scratching for hard flooring
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Central lazy Susan operation	Manual 360° smooth rotation with no locked positions, designed for shared dish access
Assembly configuration	Knock-down construction, pedestal attaches to tabletop with included hardware, no permanent on-site joinery required
Fixed height design	Non-adjustable 770mm dining height, compatible with standard 450mm seat height dining chairs
Surface maintenance requirement	Clean with soft damp cloth, avoid abrasive cleaners and direct hot pan contact to preserve finish
Non-extendable fixed top	Solid fixed round tabletop with no expansion leaves or foldable sections for consistent circular footprint
Pedestal support design	Single central cylindrical column support, no protruding legs to interfere with chair placement around full perimeter
Weight distribution	Centered base design evenly distributes tabletop load to prevent tipping when loaded on one side
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential dining room use	Ideal for 8-person family meals and dinner parties in dedicated dining spaces
Private restaurant dining room use	Suitable for private VIP dining rooms in Chinese cuisine restaurants
Hotel banquet suite use	Appropriate for small event dining and guest reception in hotel hospitality suites
Recommended pairing	Pair with 8 matching New Chinese style solid wood dining chairs with 450mm seat height
Flooring suitability	Safe for marble, wood, tile and carpet flooring with included felt floor protection pads
Space requirement recommendation	Install in rooms with minimum 3000 x 3000 mm clear floor area to allow chair pull-out and circulation

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture - Strength, durability and safety for domestic dining tables, applicable for structural performance requirements
EN 13722:2004	Furniture - Test methods for surface resistance to dry heat, applicable for finish heat resistance verification
EN 71-3:2019	Safety of toys - Migration of certain elements, applicable for coating heavy metal content limits for indoor furniture

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for structural stability and dimension tolerances
GB 18584-2001	Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture, applicable for formaldehyde emission limits
GB/T 4893.4-2013	Surface film hardness test for furniture finishes, applicable for verifying scratch resistance of wood coating
GB/T 10357.1-2013	Mechanical test for tables - strength and stability, applicable for static load and tipping resistance verification

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for structural stability and dimension tolerances；
2. GB 18584-2001：Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture, applicable for formaldehyde emission limits；
3. GB/T 4893.4-2013：Surface film hardness test for furniture finishes, applicable for verifying scratch resistance of wood coating；
4. GB/T 10357.1-2013：Mechanical test for tables - strength and stability, applicable for static load and tipping resistance verification；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RD-TBL-WL1800-LS

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RD-TBL-WL1800-LS

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RD-TBL-WL1800-LS打开导出工具

页面快速操作

发布采购询价

产品描述

This New Chinese Style Walnut Round Dining Table features a streamlined, balanced silhouette anchored by a single cylindrical pedestal base, eliminating protruding legs to create an unobstructed circular perimeter for flexible seating. The rich walnut finish carries consistent vertical grain across the tabletop, matching central lazy Susan, and pedestal exterior, with a dark matte carbon steel foot trim at the base that adds a subtle, refined contrast to the warm wood tones for a cohesive, understated elegant look suited to classic contemporary interiors. The table is built with a 50mm thick walnut-finished solid hardwood tabletop sealed with a low-VOC matte clear polyurethane coating, paired with a matching solid hardwood lazy Susan fitted with a zinc-plated steel ball bearing for low-friction movement. The cylindrical pedestal uses a walnut wood veneer over engineered wood core, secured to the tabletop with rust-resistant zinc-plated steel bolts across 8 connection points for stable structural support. The base’s carbon steel trim is lined with 5mm thick felt pads to prevent scratches across all common flooring types. The central lazy Susan offers smooth manual 360-degree rotation with no locked positions, designed to simplify shared dish access during group meals. The fixed 770mm dining height aligns with standard 450mm seat height dining chairs, and the centered weight distribution of the single pedestal base evenly spreads loads to reduce tipping risk from unevenly placed items. The non-extendable fixed top maintains a consistent circular footprint, and surface care only requires wiping with a soft damp cloth, as abrasive cleaners and direct hot pan contact can damage the finish over time. This table is suited for residential dining rooms hosting regular family meals and dinner parties for 8 people, private VIP dining rooms in Chinese cuisine restaurants, and small event dining or guest reception spaces in hotel hospitality suites. It pairs best with 8 matching New Chinese style solid wood dining chairs, and requires a minimum 3000 x 3000 mm clear floor area to accommodate chair pull-out and comfortable guest circulation. For procurement, note the product ships as one set across two cartons, with an 40 minute assembly time using included hardware and no permanent on-site joinery required. The structural frame carries a 3-year warranty, while the surface finish is covered for 1 year. The unbranded design supports custom seating coordination without mandated matching collections, and its scratch-resistant wood surface holds a 2H pencil hardness rating, with heat resistance up to 80 °C for regular dining use.

New Chinese Style Walnut Round Dining Table with Central Lazy Susan, Cylindrical Pedestal Base Specifications

供应商与现货