纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1900 × 800 × 890 mm
Single seat width	580 mm
Seat height from floor	420 mm
Seat depth	490 mm
Backrest height above seat	600 mm
Armrest height above floor	650 mm
Support beam cross-section	125 mm
Leg spread width	780 mm
Floor glide diameter	50 mm
Perforation hole diameter	8 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight per 3-seat unit	52 kg
Static load per individual seat	150 kg
Total frame static load capacity	450 kg
Armrest vertical static load	120 kg
Seating cycle durability	50000 cycles
Powder coating thickness	70 μm
Recommended maximum occupancy	3 adults
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat and back panels	1.8 mm perforated cold-rolled steel, electrostatic powder coated
Armrest and leg assemblies	2.0 mm polished die-cast aluminum alloy, chrome-finished
Central support beam	2.5 mm black powder-coated Q195 triangular steel tube
Welded connection brackets	5 mm stamped steel plate, CO2 shielded welded
Floor contact glides	Non-slip rubber with chrome-plated metal trim cap
Edge trim between seats	Polished chrome-plated steel divider strips
Surface finish process	Acid pickled, phosphated, 70μm electrostatic powder coating
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel
Five-star Base Material Thickness	Metal base wall 3.5 mm; diameter 700 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating configuration	Fixed connected 3-position row on shared central beam
Floor mounting option	Compatible with expansion bolt fixed floor installation
Surface ventilation	Perforated seat and back mesh enables continuous air flow
Cleaning access	Smooth welded edges and open perforated design supports wipe-down sanitation
Seat separation	Raised metal dividers define individual seating positions for orderly use
Anti-tip stability	Splayed four-point leg base with non-slip glides prevents lateral tipping
Configuration customization	Supports add-on center tables, USB ports or infusion poles per public area needs
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Airport terminal waiting areas	High-traffic durable design supports continuous daily use by transient passengers
Hospital and clinic waiting zones	Ventilated perforated surface and easy-clean finish meets hygiene requirements
Railway and bus station concourses	Fixed anti-tip structure prevents unauthorized movement or repositioning
Government service hall queuing areas	Neutral silver finish and ordered seat division supports formal public spaces
Bank and office reception waiting areas	Compact 3-seat footprint fits small reception zones without excess space
Indoor public corridor rest points	Scratch-resistant powder coat finish withstands frequent heavy use
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139:2013	Seating for non-domestic use, strength and durability requirements for public area chairs
EN 1022:2018	Domestic and non-domestic seating, stability test methods for free-standing chairs

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.4 公共及休闲座椅

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3325-2017	General technical requirements for metal furniture, applicable for structural strength and finish acceptance
GB/T 6461-2002	Rating of salt spray corrosion resistance for painted metal surfaces, Grade 10 recommended
GB/T 10357.3-2013	Furniture mechanical test methods for seating static load and durability
Salt spray corrosion resistance rating	Grade 10 per GB/T 6461

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3325-2017：General technical requirements for metal furniture, applicable for structural strength and finish acceptance；
2. GB/T 6461-2002：Rating of salt spray corrosion resistance for painted metal surfaces, Grade 10 recommended；
3. GB/T 10357.3-2013：Furniture mechanical test methods for seating static load and durability；
4. Salt spray corrosion resistance rating：Grade 10 per GB/T 6461；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · PUB-WB-3S-1900

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · PUB-WB-3S-1900

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · PUB-WB-3S-1900打开导出工具

页面快速操作

发布采购询价

产品描述

The 3-Seater Perforated Metal Public Waiting Gang Chair (model PUB-WB-3S-1900) is an unbranded fixed-row seating solution designed for high-traffic shared spaces. Presenting a clean, utilitarian visual profile, the unit combines silver perforated metal seat and back panels with polished chrome-finished armrest and leg assemblies, set atop a matte black powder-coated central support beam. Raised polished chrome dividers between seats clearly demarcate three distinct individual seating positions, creating an orderly, structured layout that balances open accessibility with defined personal space. The splayed four-point leg base spreads widely for a grounded, stable silhouette, with non-slip rubber glides finished with chrome trim caps at floor contact points for a polished, cohesive look. Constructed for long-term heavy use, the chair features 1.8mm perforated cold-rolled steel seat and back panels treated with an acid pickled, phosphated surface preparation and finished with 70μm electrostatic powder coating for scratch resistance. Armrest and leg components are formed from 2.0mm polished die-cast aluminum alloy with a chrome finish, while the central structural beam is built from 2.5mm black powder-coated Q195 triangular steel tube. All connection brackets use 5mm stamped steel plate joined with CO2 shielded welding for rigid, long-lasting joints, with 14mm bent plywood internal supports reinforcing both seat and back assemblies. Smooth, finished welds eliminate sharp edges, and the open perforated surface enables unobstructed airflow for comfortable seating even during extended waits, while supporting quick wipe-down sanitation routines. The splayed leg base with non-slip glides prevents lateral tipping, and the unit is compatible with expansion bolt floor mounting for permanent, secure installation. Customization options including add-on center tables, USB ports, or infusion poles are available to match specific public area requirements. Each seat supports a static load matching recommended occupancy for three adults, with a tested seating cycle durability rating suited to consistent daily use. This gang chair is suited to a wide range of commercial and public settings, including airport terminal waiting areas, hospital and clinic waiting zones, railway and bus station concourses, government service hall queuing areas, bank and office reception waiting spaces, and indoor public corridor rest points. Its compact three-seat footprint fits smaller reception zones without occupying excess floor space, while its neutral silver finish complements formal, professional public environments. For procurement teams, note that each unit ships across two cartons, with an assembly time of 40 minutes per set, and pre-planning for floor mounting hardware, optional add-on accessories, and site access will streamline installation. The unit’s robust welded construction and hard-wearing surface finishes make it a practical choice for locations with continuous transient visitor traffic. With an overall dimension of 1900 x 800 x 890 mm, the chair fits standard public space layout clearances without requiring oversized walkway allowances.

3-Seater Perforated Metal Public Waiting Gang Chair Specifications

供应商与现货