纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1800 × 768 × 890 mm
Seat center-to-center spacing	600 mm
Individual seat width	520 mm
Seat depth	460 mm
Seat height (floor to seat surface)	450 mm
Backrest height above seat	510 mm
Armrest height (floor to arm top)	620 mm
Support beam cross-section height	68 mm
Armrest length	330 mm
Leg fore-aft spread length	630 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight (3-seat unit)	75 kg
Per-seat static load rating	200 kg
Total unit static load rating	600 kg
PU panel service life	20 years
Surface corrosion resistance coating durability	8 years
Recommended maximum seated occupants	3
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles
Five-star Base Static Load Reference	Acceptance target ≥120 kg; chair reference load 150 kg

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat and back panels	30mm thick self-skin integral polyurethane foam
Seat inner support frame	1.5mm thick welded cold-rolled steel
Armrests and support legs	ADC12 die-cast aluminum with nano-spray anti-oxidation coating
Central support beam	3.0mm wall thickness hexagonal aluminum alloy
Fasteners and connection brackets	Die-cast aluminum brackets with self-locking steel nuts and anti-loosening washers
Floor glides	Height-adjustable anti-slip nylon/rubber pads
Metal surface finish	Silver electrostatic powder coating with anti-rust pretreatment
Beam end caps	Impact-resistant ABS plastic caps to cover exposed beam ends
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating configuration	Fixed linear 3-position gang layout with modular connection points
Floor mounting feature	Adjustable leveling glides for uneven floors, optional permanent floor bolting
Seat replacement capability	Individual seat/back units detachable from central beam for maintenance
Surface maintenance feature	Non-porous PU surface compatible with chlorine-based disinfectant wiping
Optional accessory mounting	Pre-punched connection points for add-on side tables, USB ports or IV poles
Stability feature	Splayed X-form end legs with wide footprint to prevent tipping under uneven load
Noise reduction feature	Rubber glides isolate metal frame from hard flooring to eliminate movement noise
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Airport terminal waiting areas	Suitable for high-traffic transit zones due to durable metal frame and wipe-clean PU surface
Hospital and clinic waiting zones	Compatible with disinfectant cleaning for medical infection control requirements
Railway and bus station waiting halls	High load rating and long service life suit continuous daily public use
Bank and government service hall visitor areas	Neutral silver/black aesthetic fits formal public service interior design
School and corporate reception waiting areas	Standard 3-seat layout efficiently organizes queuing visitor traffic
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Office/public seating stability standard	EN 16139:2013 Furniture - Seating for non-domestic use - Strength, durability and stability
Upholstered furniture fire standard	EN 1021:2014 Furniture - Assessment of ignitability of upholstered furniture - Ignition source smouldering cigarette

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Multi-seat seating performance standard	ANSI/BIFMA X2020Lounge and Public Seating

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Public seating safety requirement	GB/T 35607General technical requirements for public seating
Furniture environmental standard	GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wooden furniture
Flame retardancy requirement	GB 20286Flame retardant products and components in public places

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Public seating safety requirement：GB/T 35607General technical requirements for public seating；
2. Furniture environmental standard：GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wooden furniture；
3. Flame retardancy requirement：GB 20286Flame retardant products and components in public places；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · PUGANG-3S-ALU

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · PUGANG-3S-ALU

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · PUGANG-3S-ALU打开导出工具

页面快速操作

发布采购询价

产品描述

The 3-Seat Die-Cast Aluminum PU Public Gang Waiting Chair (model PUGANG-3S-ALU) is an unbranded fixed linear gang seating solution designed for high-traffic public use, presenting a clean, functional aesthetic with a silver finished metal frame contrasted by black padded seat and back panels. The unit follows a straight three-position layout with integrated armrests, supported by splayed X-form end legs that create a wide, stable footprint to resist tipping under uneven load. Its construction prioritizes long-term durability: ADC12 die-cast aluminum forms the armrests and support legs, treated with a nano-spray anti-oxidation coating and silver electrostatic powder coat with anti-rust pretreatment, while a hexagonal aluminum alloy central beam with thick wall construction delivers rigid structural support. Seat and back panels are crafted from thick self-skin integral polyurethane foam over an internal bent plywood support board, connected to the frame via die-cast aluminum brackets secured with self-locking steel nuts and anti-loosening washers. Impact-resistant ABS caps cover exposed beam ends, and height-adjustable anti-slip rubber glides sit at leg bases. The chair delivers practical features tailored to public space demands: individual seat and back units detach from the central beam for simplified maintenance, the non-porous PU surface withstands wiping with chlorine-based disinfectants, and rubber glides eliminate movement noise on hard flooring while allowing leveling on uneven surfaces, with an option for permanent floor bolting for fixed installations. Pre-punched connection points support add-on accessories including side tables, USB ports, or IV poles. Its neutral, formal color palette and standard 3-seat layout suit a wide range of spaces, including airport terminals, hospital and clinic waiting zones, railway and bus stations, bank and government service halls, as well as school and corporate reception areas, where it efficiently organizes visitor queuing and traffic flow. For procurement planning, note that each unit ships across two cartons, with a straightforward assembly process per set. The design supports modular connection for extended seating runs, and its robust load rating, long PU panel service life, and corrosion-resistant coating make it a practical choice for continuous high-volume daily use.

3-Seat Die-Cast Aluminum PU Public Gang Waiting Chair Specifications

供应商与现货