纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1830 × 800 × 900 mm
Single seat width	540 mm
Seat center pitch	600 mm
Seat depth	460 mm
Seat height from floor	450 mm
Backrest height from seat	500 mm
End armrest height from floor	595 mm
Splayed end leg depth spread	600 mm
Under-seat clearance height	320 mm
Seat panel edge thickness	30 mm
Support beam profile size	90 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Single-seat static load capacity	200 kg
PU surface abrasion resistance	100000 cycles
Recommended service life	10 years
Anti-slip foot vertical adjustment range	15 mm
Powder coating thickness on metal parts	170 μm
Net weight per 3-seat unit	36 kg
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles
Five-star Base Static Load Reference	Acceptance target ≥120 kg; chair reference load 150 kg

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat and back panels	Integral self-skinning high-density polyurethane, matte orange finish
Internal seat/back support frame	1.2mm thick welded cold-rolled steel tube, fully encased in PU
Horizontal support beam	2.5mm thick high-strength steel tube, electrostatic powder coated silver
End legs and armrests	ADC12 die-cast aluminum alloy, silver powder coated finish
Leveling feet pads	TPU non-slip anti-scuff pads, threaded steel adjustment stems
Seat-to-beam fasteners	Zinc-plated steel with self-locking nuts and spring washers
End leg joint cover	Injection-molded ABS cap with illegible embossed marking
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel
Five-star Base Material Thickness	Metal base wall 3.5 mm; diameter 700 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating configuration	3 fixed contoured seats aligned in a linear row on shared beam
Leveling adjustment	Threaded feet at 4 leg ends adjust to compensate for uneven floor surfaces
Surface cleaning compatibility	Non-porous PU surface supports repeated wiping with common medical disinfectants
Armrest support	Integrated curved armrests at both outer ends of the seating row
Structural stability	Splayed die-cast aluminum leg geometry provides lateral tip resistance for heavy occupancy
Under-seat access	Open unobstructed space below seats allows quick debris removal and floor cleaning
Corrosion resistance	Powder-coated metal components resist rust and wear from daily high-frequency contact
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Hospital clinic waiting areas	Disinfectant-compatible surface for easy sanitization between patient uses
Airport and rail transit terminals	Heavy-duty load rating for continuous high-volume passenger use
Government and public service lobbies	Stable fixed seating with clean matte finish for long-wait visitor use
Bank and corporate reception areas	Neutral silver and orange color option for professional public waiting zones
School and campus public common areas	Rigid vandal-resistant construction for unsupervised student public use
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139:2013	Non-domestic seating strength, durability and safety requirements
EN 1022:2018	Furniture seating determination of stability

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.4

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture applicability reference
GB/T 10357.3-2013	Furniture mechanical test for chair and stool strength and durability
GB 18584-2001	Indoor decorating and refurbishing materials limit of harmful substances

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture applicability reference；
2. GB/T 10357.3-2013：Furniture mechanical test for chair and stool strength and durability；
3. GB 18584-2001：Indoor decorating and refurbishing materials limit of harmful substances；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · PU-A3-PUB-WAIT

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · PU-A3-PUB-WAIT

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · PU-A3-PUB-WAIT打开导出工具

页面快速操作

发布采购询价

产品描述

The 3-Seater High-Traffic Public Tandem Beam Waiting Chair is a fixed beam-mounted public seating solution designed for durable, long-term use in high-footfall environments. It features three contoured seats aligned in a straight linear row on a shared support beam, finished with a matte orange seat and back palette paired with silver-toned metal components, with curved integrated armrests positioned at both outer ends of the seating row. Open, unobstructed space beneath the seats creates clear sightlines and easy access to floor areas below the unit, and splayed end legs create a wide, stable base footprint. Each seat and backrest is constructed from integral self-skinning high-density polyurethane, fully encasing an internal welded cold-rolled steel tube frame and bent plywood support structure. The horizontal support beam is formed from high-strength steel tube with an electrostatic powder-coated finish, while end legs and armrests use die-cast aluminum alloy with a matching silver powder coat. Leveling feet at each leg end are fitted with TPU non-slip, anti-scuff pads paired with threaded steel adjustment stems, and all seat-to-beam connections use zinc-plated steel fasteners with self-locking nuts and spring washers for secure, long-lasting assembly. The non-porous PU surface is compatible with repeated wiping using common medical disinfectants, and powder-coated metal components resist rust and wear from daily high-frequency contact. The fixed, rigid construction supports stable seating, with a single-seat static load capacity suited to heavy, continuous use, and the splayed leg geometry delivers lateral tip resistance under full occupancy. The open under-seat space allows quick debris removal and routine floor cleaning without moving the unit, and the adjustable feet compensate for uneven floor surfaces to maintain a steady, level position. This seating unit is suited for a wide range of public-facing spaces, including hospital clinic waiting areas, airport and rail transit terminals, government and public service lobbies, bank and corporate reception areas, and school campus common areas. For procurement planning, note that each unit ships in two cartons, with a reference assembly time of 40 minutes per set. The unbranded model carries a recommended 10-year service life, and its abrasion-resistant PU surface is engineered to withstand repeated daily use without premature wear. When planning reception or waiting area layouts, the neutral silver and warm matte orange finish pairs well with professional public space design palettes, and coordinates effectively with 2.4 m executive desks where paired reception workstations are required.

3-Seater High-Traffic Public Tandem Beam Waiting Chair Specifications

供应商与现货